Magswitch MagSquare Powerful magnetic device that can be turned on and off with a simple half turn of a knob. No batteries. No electricity
| Part # | Description |
|---|---|
| MSW8100099 | Magsquare 1000/454 kg |
| MSW8100106 | Magsquare 600/272 kg |
| MSW8100238 | Magsquare 400/181 kg |
| MSW8100494 | Magsquare 165/68 kg |
Mini Angles Reduce setup time
• Stays Clean - Longer Life
• More angles in one product
• Stronger grip available in larger sizes
• ON/OFF - When off, metal debris falls away
| Part # | Description |
|---|---|
| MSW8100350 | Mini Multi |
| MSW8100351 | Mini Multi w/ 200 Amp Ground |
| MSW8100352 | Mini |
| MSW8100438 | Multi Angle 400 |
MSW8100089
Magswitch MLAY 600 Lifting Magnet 200/90 Single Lifter. Magswitch. The super strong “SINGLE 50mm” is rated at 175 lbs. (3X factor of safety) breakaway on 1/2 inch and thicker flat metal
MSW8100359
Manual Hand Lifters - Ideal for cutting tables, scrap and small steel handling. Manual on/off. Push button on/off cordless electric Hand lifter. Rechargeable batteries. Swivel handle
MSW8100503
90-Degree Angle 1000. Magswitch 90° welding angle featuring two MagSquare 1000 magnets, each with 1000lb/460kg holding force on each axis. Magswitch 90 degree angles offer unmatched versatility, magnets move up and down or reversible on each axis. Add More MagSquare for additional strength. Holds flat or round steel
MSW8100747
Magnetic Ground Clamp, 200 lb Capacity, 4"w x 2 7/10"l x 2 3/5"h. Instant ground on flat or pipe. On/Off magnetic clamp enables welder to quickly set up, weld and move on to the next job. Provides strong grip on flat or round surfaces. No more tacking on tabs in large sheet-weld or pipe jobs
MSW8100920
MagDrill Disruptor 30 utilizes patented shallow-field magnetic technology that offers incredibly strong grip, even on steel as thin as 1/8". Also, the base automatically pivots to conform to any pipe 3" or larger. The magnets do not require electricity, so all the power goes to the motor. This also offers increased safety as the tool will not release from the target material in the event of an unintentional power loss. The magnets can be turn partially on, so the user can fine-tune the exact placement of the cutter head prior to fully engaging the magnets. When the magnets are turned to the “off” position, they are completely off for easy cleanup of steel shavings
MFX01-0145-78
Magnaglo® 14AM Prepared Oil Bath, Brown, 16 oz Aerosol Can. Fluorescent prepared bath combines 14A powder with Carrier II oil. Ready-to-use without measuring and mixing. Used to locate fine surface and subsurface discontinuities such as: inclusions, seams, shrink cracks, tears, laps, flakes, welding defects, and grinding, quenching or fatigue cracks
MFX01-1580-78
7HF Visible Magnetic Particle Wet Method Prepared Bath, Black,16oz Aerosol Composed of Magnavis™® 7C Magnaflux magnetic powder suspended in a low volatility mineral oil. Designed for spot inspections of parts that must be inspected in the field due to size or location. Suitable for inspection of tubes, piping and other large structures
MFX01-1780-69
#8A Red 10 Lb Non-fluorescent Particles General purpose dry method particles. Used on dark surfaces for optimum contrast
MFX01-2250-78
Magnavis WCP-2 Contrast Paint, White, 16 oz Aerosol. Can be used with both dry and wet-method magnetic particles. Composed of acetone and inorganic pigments and utilizes a carbon dioxide aerosol propellant for ease of application. Designed for use in applications where the contrast in color between the part being tested and the magnetic particles being used is insufficient for reliable identification of flaws
MFX01-5155-78
Spotcheck SKL-SP2 Solvent Removable Penetrant, Red, 16 oz Aerosol Can. Has been successfully used on non-porous ceramics and other similar materials. Offers maximum reliability in locating surface-open flaws and discontinuities. Solvent removable red color contrast penetrant
MFX01-5190-78
Spotcheck SKL-WP2 Water Washable Penetrants, Red, 16 oz Aerosol Can. Eliminates the need for solvent removers or emulsifiers in the elimination of excess surface penetrant. Low odor, water washable penetrant that exhibits outstanding penetrating characteristics and discontinuity identification. Red visible dye. Water wash removable
MFX01-5352-78
Skd-S2 Spotcheck® Non-chlorinated Developer A bright white, non-aqueous developer, SKD-S2 creates an opaque white background for high-contrast penetrant testing and quickly draws penetrant out to create stronger, clearer indications for better inspection reliability and sensitivity (16Oz Can) 12/Case
MFX01-5352-35
Skd-S2 Spotcheck® Non-chlorinated Developer 1 Gallon, 4/Case
MFX01-5750-78
Spotcheck SKC-S, Clear, 16 oz Aerosol Can Non-halogenated. Used in the liquid penetrant inspection process. Used on a moist cloth to remove surface penetrant from the inspection area prior to applying developer
2-Ear design gives increased clamping range. Deburred edges prevents damage to clamped parts. Fast, simple, secure installation. Ideal for air and liquid lines. Robust design for good, permanent sealing
| Part # | Description |
|---|---|
| OET10100011 | 0811-100 2 Ear Clamp 11Mm (0811) 3/8 100/Bag |
| OET10100016 | Zinc Plated Carbon Steel Sae 1113, 10.8-13.0, .425-.512 |
| OET10100019 | 2 Ear Clamp 1315 100/Bag |
| OET10100022 | 1517-100 2 Ear Clamp 17Mm (1517) 19/32 100/Bag |
| OET10100024 | 1518-100 2 Ear Clamp 1518 100/Bag |
| OET10100027 | 1720-100 2 Ear Clamp 20Mm (1720) 3/4 100/Bag |
| OET10100030 | 2023-100 2 Ear Clamp 23Mm (2023) 7/8 100/Bag |
OET14100396
Oetiker Single Action Pincers Straight jaw single action pincer. Designed for installing and removing ear clamps. Forged steel tool with insulated handle
OET18500106
WK82 Welding Hose Repair Kit
Welding Helmet E684 with Auto Pilot. The new Optrel e684 is the only welding helmet with an ADF lens that fully automates protection through its Adaptive Shade Autopilot technology, automatically adjusting its shade level as the welder works – and in full high definition viewing
OPT1006.500 – Silver
OPT1006.501 – Black
OPT1006.502 – Dark Blue
OPT1010.100
Optrel Panoramaxx Helmet offers an unprecedented visual environment for the welder. A nose cut-out in the auto-darkening filter (ADF) brings the lens closer to the eyes, enlarging the field of view 6 times compared to a standard ADF. Together with a world record light state of 2.5, optrel’s True Color view, and the Autopilot feature that fully automates shade level adjustments while you weld, the optrel panoramaxx provides maximum viewing comfort, never seen before in an auto-darkening helmet. Only weighs 550g
OPT1006.600
vegaview2.5 auto-darkening helmet offers the BRIGHTEST view possible in light state with Shade Level 2.5 Up to 4 times lighter view in light state and in grind mode
TIG TORCH PACKAGES
| Part # | Description |
|---|---|
| PARWP17-12R | WP17 Torch Package X 12.5FT Rubber |
| PARWP17VFX-12R | WP17VFX Torch Package with Flexi Valve Head X 12.5FT Rubber |
| PARWP17-25-2 | WP17 Torch Package X 25FT 2 Piece |
| PARWP17FX-25-2 | WP17FX Torch Package with Flexi Head X 25FT 2 Piece |
| PARWP17VFX-25-2 | WP17VFX Torch Package with Flexi Valve Head X 25FT 2 Piece |
| PARWP26-25-2 | WP26 Torch Package X 25FT 2 PIECE |
| PARWP26V-25-2 | WP26V Torch Package X 25FT 2 PIECE |
| PARWP26FX-25R | WP26FX Torch Package X 25FT RUBBER |
*All styles and models are available
LINERS
| Part # | Description |
|---|---|
| PAR415-116-15 | TRG Steel Liner 200-500A .045IN -1/16IN / 1.2-1.6 15FT |
| PAR42-3035-15 | PA NO 1/2 Steel Liner Conduit 0.8-0.9MM X 15FT |
| PARA44-3545-15 | PA NO 3/4/5 Steel Liner, Brass Nipple 0.9-1.2MM X 15FT |
| PARA44-3545-25 | PA NO 3/4/5 Steel Liner, Brass Nipple 0.9-1.2MM X 25FT |
*All styles and models are available
GAS LENS BODY
| Part # | Description |
|---|---|
| PAR45V24 | WP17/18/26 Gas Lens Body .040IN / 1.0MM |
| PAR45V42 | WP9/20/24/25 Gas Lens Body .040IN / 1.0MM |
| PAR45V45 | WP9/20/24/25 Gas Lens Body 1/8IN / 3.2MM |
| PAR45V26 | WP17/18/26 Gas Lens Body 3/32 / 2.4MM |
| PAR45V44 | WP9/20/24/25 Gas Lens Body 3/32IN / 2.4MM |
| PAR45V116 | WP17/18/26 LGE DIA GAS LENS 1/16IN / 1.6MM |
*All styles and models are available
GAS LENS CUP
| Part # | Description |
|---|---|
| PAR53N58 | WP9/20/24/25 Gas Lens Cup1/4IN /6MM |
| PAR53N59 | WP9/20/24/25 Gas Lens Cup 5/16IN /8MM |
| PAR53N87 | WP9/26 Large Diameter Gas Lens Cup 3/4IN /19MM |
| PAR53N88 | WP9/26 Large Diameter Gas Lens Cup 5/8IN /16MM |
*All styles and models are available
CERAMIC CUP
| Part # | Description |
|---|---|
| PAR10N44 | WP17/18/26 Ceramic Cup 3/4IN /19MM |
| PAR10N45 | WP17/18/26 Ceramic Cup 5/8IN /16MM |
| PAR796F74 | WP9/26 X Long Ceramic Cup 3/16IN /5MM |
| PAR796F75 | WP9/26 X Long Ceramic Cup 1/4IN /6MM |
| PAR796F70 | WP9/26 Long Ceramic Cup 3/162 /5MM |
| PAR796F71 | WP9/26 Long Ceramic Cup 1/4IN /6MM |
*All styles and models are available
COLLET
| Part # | Description |
|---|---|
| PAR13N20 | WP9/20/24/25 Standard Collet .020IN /0.5MM |
| PAR10N22 | WP17/18/26 Standard Collet .040IN /1.0MM |
| PAR13N21 | WP9/20/24/25 Standard Collet .040IN /1.0MM |
| PAR10N23 | WP17/18/26 Standard Collet 1/16 /1.6MM |
| PAR402-3 | TRG 200-500A Standard Retaining Head |
*All styles and models are available
CONTACT TIPS
| Part # | Description |
|---|---|
| PAR11-35 | PA NO 1 Contact Tip .035IN /0.9MM ECU |
| PAR14-35 | PA NO 2/3/4 Contact Tip .035IN /0.9MM ECU |
| PAR14-40 | PA NO 2/3/4 Contact Tip .040IN /1.0MM ECU |
| PAR14-45 | PA NO 2/3/4 Contact Tip .045IN /1.2MM ECU |
| PAR1589 | PEZH/F-600E Contact Tip .035IN /0.9MM ECU |
| PAR1590 | PEZH/F-600E Contact Tip .045IN /1.2MM ECU |
| PAR403-116 | TRG 200-500A Contact Tip 1/16IN 1.6MM |
| PAR403-35 | TRG 200-500A Contact Tip 0.35IN /0.9MM |
| PAR403-45 | TRG 200-500A Contact Tip .045IN /1.2MM |
| PAR7489 | PEZ G/600W Contact Tip 0.35IN /0.9MM ECU |
| PAR7490 | PEZ G/600W Contact Tip .045IN /1.2MM ECU |
| PAR7491 | PEZ G/600W Contact Tip 1/16IN 1.6MM ECU |
| PAR403-1-30 | TRG 200-500A Contact Tip HD .030IN /0.8MM |
| PAR403-1-35 | TRG 200-500A Contact Tip HD .035IN /0.9MM |
| PAR403-1-45 | TRG 200-500A Contact Tip HD .045IN /1.2MM |
*All styles and models are available
NOZZLES
| Part # | Description |
|---|---|
| PAR23-50 | PA NO 3 NOZZLE SELF INS 1/2IN /13MM |
| PAR24CT-62S | PA NO 3/4 Fixed Nozzle Coarse 5/8IN /16MM |
| PAR34CT | PA NO 2/3/4 Nozzle Insulator Coarse Thread |
| PAR401-4-50 | TRG 200-300A Nozzle 1/8IN RECESS 1/2IN /13MM |
| PAR401-6-62 | TRG 300-500A 5/8 BORE NOZZLE 1/8 RECESS TIP |
| PAR4391 | PEZ 200/300E Brass Nozzle 5/8IN /16MM |
| PAR4491 | PEZ 400/600E Brass Nozzle 3/4IN /19MM |
*All styles and models are available
WWW5
Tank Wrench B&MC (Tw-5)
WWWEG-300-B
WWWEG-500-B
Ground Clamps 300Amp or 500Amp
WWWHL-1020-B
Cable Lug Hammer
WWWHL-3040-B
Cable Lug Hammer
WWWLGC-300
Ground Clamp Heavy-Duty Copper
WWWLGC-500
Ground Clamp Heavy-Duty Copper
WWN900-MG-8
Mastergage, Cam-Type Weld Gage
100-NFG-7
Fillet Weld Gage
WWWMGC-300
Ground Clamp Magnetic
WWWMGC-500
Ground Clamp Magnetic
WWWPGC-500
Ground Clamp Copper 500 Amp
WWWSGC-600
Ground Clamp 600 Amp
WWWWGC-600
Ground Clamp 600 Amp C
Safetube® rod canisters provide short term consumable storage. Diamond shape prevents unwanted canister rolling off a work surface. The canister cap uses a quick-lock thread for simple removal with just a quarter turn. The cap is also sealed with a pressure fitted O-ring to prevent intrusion of moisture and contaminants
| Part | Description |
|---|---|
| PHX1205441 | 14 inch 10lb Capacity |
| PHX1205455 | 18 inch 15lb Capacity |
PHX1200201
Type 300 ovens are stationary bench ovens that offer high capacity storage. The oven is powered with two 500W heating elements, which work with the circular shape and door vent to provide a consistent storage environment. Also featured is a thermostat mounted on the rear of the oven, allowing for chamber temperature control. Ideal-sized bench oven for welding and industrial jobsites
PHX1205500
Type 1 Portable Rod Oven 120/240V 10 lb. Removable locking cord allows easy replacement. Spring latch tightly secures an insulated lid for maximum efficiency
PHX1205510
Type 2 120/240V 20lb. Dry Rod II Oven. Removable locking cord allows easy replacement. Spring latch tightly secures an insulated lid for maximum efficiency
PHX1205520
Type 5 120/240V 50lb. Dry Rod II Oven. Removable locking cord allows easy replacement. Spring latch tightly secures an insulated lid for maximum efficiency
Auto Darkening Helmet
• Superior comfort with pivot style headgear
• Made of high‐impact resistant nylon
• Four independent arc sensors in a staggered design to deliver the most reliable arc detection
• High speed lens – 1/30000 second
• Powered by solar cells and replaceable lithium‐battery
• Includes magnification lens holder
• Fully adjustable nylon suspension
PYR‐WHAM3030GB
Glossy Black
PYRWHAM3030FL
Flames
PYR‐WHAM3030FM
Fire Metal Decorated
RODRG-100-24 14 inch
RODRG-200-24 18 inch
Polyethylene Canisters, Electrode Handled, Blue, 24 per case features threaded cap with neoprene seal to provide airtight protection for electrodes and other materials.
RODRG-300-12
Polyethylene Canisters, 36 inch Electrode Handled, Blue Features threaded cap with neoprene seal to provide airtight protection for electrodes and other materials. Great for storage and inventory control of welding electrodes, rods and filler metals. 12/Case
| Part # | Description |
|---|---|
| TEMTS0150 | 28006 Tempilstik 150 Fahrenheit 66 Centigrade |
| TEMTS0200 | 28012 Tempilstik 200 Fahrenheit 93 Centigrade |
| TEMTS0225 | 28016 Tempilstik 225 Fahrenheit 107 Centigrade |
| TEMTS0250 | 28019 Tempilstik 250 Fahrenheit 121 Centigrade |
| TEMTS0300 | 28026 Tempilstik 300 Fahrenheit 149 Centigrade |
| TEMTS0350 | 28031 Tempilstik 350 Fahrenheit 177 Centigrade |
| TEMTS0400 | 28035 Tempilstik 400 Fahrenheit 204 Centigrade |
| TEMTS0450 | 28039 Tempilstik 450 Fahrenheit 232 Centigrade |
| TEMTS0500 | 28043 Tempilstik 500 Fahrenheit 260 Centigrade |
SEL29301
Lift Front Helmet
SEL29311
Silver Lift Front Helmet
SEL29341
Blue Lift Front Helmet
SEL32100
Replacement Window - Clear Anti-Fog
SEL32151
Crown with Holes with Clear Window with Shade
SEL96110
Knee-Pro Knee Pads
TwecoTong Electrode Holders. Efficient 6 position jaw patterns and fully insulated, protected springs. Reversible top and bottom Insulators
| Part # | Model | Amps |
|---|---|---|
| TWE9110‐1101 | A‐532 | 200A |
| TWE9110‐1102 | A‐316 | 250A |
| TWE9110‐1103 | A‐732 | 300A |
TWE1560-1110
Gas Diffuser (Pk/5) Constructed to ensure consistent dimensional stability. Silicon O-ring seals against the nozzle assembly. Use in light to medium duty welding applications
TWE1047-1027
Dinse Style Mechanical Cable Connectors Complete
TWE9425-1200
Complete Connection Equipped with heat- and oil-resistant covers. Provides a positive cam action which optimizes interface between connector halves
VIC1000-0263
FM157 Flowmeter Assembly (Packaged) Flowtube and outer tube are made of impact resistant Lexan for severe applications
• MIG/TIG applications
VIC0384-2101
Journeyman EDGE 2.0 540/510, 90° Plus Outfit. This heavy-duty outfit cuts up to 8" (203.2 mm) and welds up to 3" (76.2 mm) with accessories
VIC0381-1928
CA 2460 Heavy-Duty Cutting Attachment, 8 inch Cut Capacity, 90 Degree Head, Tip
VIC0381-1940
Victor 400 Series CA411-1, Heavy-Duty, Cutting Attachment, Series 1
VIC0384-2540
Victor Medalist G250, 540/510, Medium Duty, Cutting System. Built-In Check Valves. One Cutting Attachment for All Fuel Gases
VIC0384-2690
Victor Medalist G-350, 540/510, Heavy-Duty, Cutting System, Medalist 350
WA007022
Weld-Aid Nozzle Kleen #2 16oz. Protects nozzles, diffusers, and tips. Smoke and odour free. Solvent-based, paintable, and non-flammable
WA007030
Weld-Aid Weld Kleen 20oz. Protects fixtures, parts, and clamps. Smoke and odour-free. Solvent-based, paintable, and non-flammable
WA007040
Weld-Aid Lube-matic 5 oz Cuts rust and reduces wire drag 60%. Great for longer distance feed. Helps feed all mild steel, fabricated, and core wires
WA007060
Lube Pad Lubrication allows smooth feeding of wires with poor cast, helix, rust and long feed liners. Pre-treated with Lube Matic™® liquid
WA007061
Wire Kleener Pad, Solid, Red Clean wire and reduce burnback 50%. Excellent for aluminum. Reduces wire drag by 60% and feeds wire more smoothly
WA007090
Weld-Aid Weld Kleen 350/1GL Biodegradable, non-toxic & paintable. Can be frozen. Economical and safe
WA007091
Weld-Aid Weld Kleen 350/5GL Biodegradable, non-toxic & paintable. Can be frozen. Economical and safe
WA007092
Weld-Aid Weld Kleen 350/55GL Biodegradable non-toxic & paintable. Can be frozen. Economical and safe
WAB-100
Brite Zinc is 69% zinc metal. Covers 40 square feet. One-step color matches the shiny look of Hot dip galvanizing. Special no clog nozzle. Meets ASTM-A780 for corrosion protection
WESFA-10
Flash Arrestor Torch Style Set 10" maximum cutting capacity. Color-coded for gas service to provide added safety. For stopping flashbacks by preventing ignition of mixed gases and to protect equipment. Internal check valves designed to prevent reverse flow and accidental mixing of gases. Torch and regulator models provide downstream and upstream protection
WESFA-30
Flashback Arrestor Regulator Adaptor Set 10" maximum cutting capacity. Color-coded for gas service to provide added safety. For stopping flashbacks by preventing ignition of mixed gases and to protect equipment such as hoses, regulators, and cylinders. Internal check valves designed to prevent reverse flow and accidental mixing of oxygen and fuel gases. Torch and regulator models provide downstream and upstream protection
Quick Connects–sets - B Size (9/16"- 18)
Western’s Quick Connects provide fast, reliable and positive protection connections and quick disconnections for torches, hoses and regulators. All models are color-coded for gas service for added safety (oxygen/green, fuel gas/red, inert gas/blue). Oxy/fuel gas models include integral reverse flow Check Valves. Quick Connects fit all B-size welding and cutting equipment.
| WESQDB10 | Torch-to-Hose Set with Check Valves |
| WESQDB20 | Hose-to-Hose Set with Check Valves |
| WESQDB30 | Regulator-to-Hose Set with Check Valves |
WESR125
Ultra Low Cost Balloon Inflator Hand tight design provides leak-free connection. Horizontal one-piece design with all brass piston construction. Replaceable rubber tilt valve. Replaceable
Viton™® O-Ring
WESWB-100
Propane Torch, Push Button Igniter, 500,000 BTU/H Output, 31 in Handle. Ergonomic handle with adjustable trigger. Flame tools are for exterior maintenance and repair. Hooks up to standard 20 lb. propane tank. Hotspotter is an all-purpose propane torch that delivers at full cylinder pressure with no smoke and no fumes. Push button igniter for fast and safe lighting
WESWB-101
Hotspotter All Purpose Propane Torch, 500,000 BTU/H Output, 31 in Handle Ergonomic handle with adjustable trigger. Flame tools are for exterior maintenance and repair. Hooks up to standard 20 lb. propane tank. Hotspotter is an all-purpose propane torch that delivers at full cylinder pressure with no smoke and no fumes
WESRPB-6HG
Hand tight Connection with Gauge Filtered throughout to trap foreign matter and extend regulator life. Heavy-duty all brass piston design. Replaceable brass quick tie hook for use with latex balloon sealing discs. Replaceable rubber tilt valve for simple, fast inflation of latex balloons
WES411
Valved Y Connection Inert Gas RH 5/8"-18 Male
WESQDB33
Q C Socket & Plug/Inert. Regulator-to-Hose Connect Brass construction provides long service life
WESQDB34
Q C Socket & Plug Hose-to-Machine Connect Brass construction provides long service life
WES37
Hose Splicer 1/4 Barb Hex
WESAW-14A
Nut Inert Arc Fitting Can accommodate up to 200 psi of pressure. Made from brass to ensure functionality and durability
WESAW-17
Nipple Inert Arc Fitting. Can accommodate up to 200 psi of pressure. Made from brass to ensure functionality and durability
WESAW-430
Coupler-inert Arc Can accommodate up to 200 psi of pressure. Made from brass to ensure functionality and durability
WSC6848-906
36318 Wilson 6'H X 8'W Black 24oz Fiberglass Blanket. Approved for use in vertical applications with light-moderate exposures resulting from chipping, grinding, heat treating, sand blasting and light horizontal welding. Prevents sparks from escaping a confined area
WSC36336
6FT X 6FT Single Panel Stur-D-Screen Frame Only. Black powder-coat finish includes square steel frame, brackets, platform "T" legs, lacing ties. Pre-drilled for caster installation. Square 19-guage steel tubing, bolted corner clamps, platform "T" legs. Stur-D-Screen available in multiple configurations for a variety of work environments
WSCUM6500
3019277 6' 6 Inc Dia. Blue Rip-Stop Umbrella, 36684 6.5' x 7' blue welding umbrella provides protection from rain or sunlight. Lightweight aluminum frame and tilt mechanism with water and fire-resistant fabric
WSC36278
Curtain 6x10 Orange PVC Grommeted and ready to hang. Heavy-duty vinyl designed to filter far/near ultraviolet radiation and blue light
WYP400-1
Flat Soapstone Holder, 3/16" X 5", Stainless Steel Brass trigger depresses and slides to proper alignment hole and snaps back to lock in position. Non-corrosive channel with brass indexing trigger provides superior sliding action. Practical design allows for one-handed operation and easy use. Quality construction for durability and appearance. Spring steel pocket clip oversized to fit leather aprons
WYP1
Standard Tip Cleaner Set 13 Cleaners Size 6 - 2
WYP800-1
Round Soapstone Holder, 1/4" X 5", Stainless Steel Inner sleeve collet securely holds the soapstone and also adjusts to grip uneven and undersized soapstone. Locking cap allows accurate adjustments for closer marking control. Sleek brass case with contrasting cap and pocket clip enhances appearance. Slim design provides better visibility in the marking area
WYP1100S
Tru Flame Tip Cleaners 111 Cleaners Size 6 - 2
WYP4
King Tip Cleaner Set 13 Cleaners Extra Long Size