Buy Fuses, Light Bulbs, and More

FUSES

Safe-T-Grip® Fuse Pullers

Features:
• Handy and convenient for removing or replacing cartridge‑type fuses.
• Notched handles provide safe, no‑slip grip.
• Features clearly marked amperage ranges.

SKU	Used With
131-34-002	0 - 100A/250V, 600V; 1/2 - 1 in. Dia. Fuses
131-34-003	31 - 600A/250V; 31 - 400A/600V; 3/4 - 2 1/2 in. Dia. Fuses

GROUND FAULT CIRCUIT INTERRUPTERS

Ground Fault Circuit Interrupters

Features:
• Made with rugged Seoprene or vinyl cable and thermoplastic protective housing.
• Weather proof and rainproof.
Test & Approvals: OSHA; UL
Function: GFCI
Type: Extension Cord

SKU	No. of Outlets	Length	Power @ Voltage
172-14880023-6	3	2.000 ft	1,800.00 W @ 120.00 VAC
172-26020008-6	3	2.500 ft	1,800.00 W @ 120.00 VAC
172-14880229-6	3	50 ft	—

LIGHT BULBS

Quartz Light Bulbs

Features:
• Quartz replacement bulbs provide a bright light.
• May be used with any 500W halogen worklight or lamp.
• Standard RSC style base makes it easy to change burned‑out bulb.
Quantity: 6 per pack

SKU	Power Consumption
172-07880	500,000 W

PLUGS & RECEPTACLES

3 Wire Grounded Vinyl Plugs

Features:
• Solid brass plug blades are firmly embedded in body.
• Resists chemical attack and is less brittle in extremely low temperatures.
• With terminal screw clamps.
Amps: 15 Amps
Input Voltage: 125V
Mounting Position: Straight
No. Of Contacts: 3

SKU	NEMA/IEC Configuration	Face View	Height
309-4867-BOX	5-15P	Male	1.65 in
309-4887-BOX	5-15R	Female	2.61 in

Plugs and Receptacles

Features:
• Connecting and protecting electrical loads is crucial to reliable, efficient and safe power management with a facility.
• Constructed of unbreakable thermoplastic.

SKU	NEMA/IEC Configuration	Amps
309-S80-SP	10-30; 10-50	50.00 A
309-S21-SP	14-30; 14-50	30.00 A; 50.00 A
309-5269N	5-15	15.00 A
309-WD5266N	5-15	15.00 A
309-1252	6-30; 6-50	50.00 A
309-S42-SP	6-30; 6-50	50.00 A

WORK LIGHTS

Double Halogen Lood Lights

Features:
• Heavy‑duty, die‑cast frame.
• Shadow Fighter™ Grills for maximum light output.
• Tempered high heat glass lens.
Test & Approvals: UL/cUL
Lumens: 20,000 lm
Conductor Size: 18/3 AWG
Cord Length: 5 ft
Guard Material: Metal
Wt.: 13.75 lb

SKU	Bulb Type	Voltage
172-L14SLED	Quartz Halogen	125 V

Portable Halogen Work Lights

Features:
• Heavy-duty, die‑cast frame.
• Shadow Fighter™ Grills for maximum light output.
• Tempered high heat glass lens.
Test & Approvals: UL/cUL
Lumens: 8,000 lm
Conductor Size: 18/3 AWG
Cord Length: 3 ft
Guard Material: Metal
Wt.: 3.75 lb

SKU	Bulb Type	Voltage
172-L33	Quartz Halogen	125 V

Trouble Work Lights

Features:
• Constructed from tough PVC yet lightweight construction makes handling effortless.
• Round orange vinyl jacket is flexible, easy‑to‑see and won’t mark floors or walls.
• Dual hook system permits hanging the work light by either the guard or handle.
• Standard with power switches and bulb cages for fast light bulb changes.

SKU	Guard Material
172-0691	Plated steel

LED Magnetic Rotating Work Lights

Features:
• Sturdy aluminum housing. Adjustable rotating head. Magnetic base.375 Lumens. Three AAA batteries included.
Type: Rotating Magnetic

SKU	Bulb Type	Lumens	Includes	Wt.
758-RT-2LT	24 LED	60	(3) AAA Batteries	10 oz
758-RT-48LT	48 LED	150	—	11.2 oz

AIR COOLING EQUIPMENT

Fans

Industrial Floor Fans

Features:
• Permanently lubricated.
• Totally enclosed motor.
• Double locking chrome plated guards.
Test & Approvals: OSHA; UL
Flow: Low: 3,200 CFM; Med: 4,200 CFM; High: 4,600 CFM
Speed: Low: 1,370 rpm; Med: 1,550 rpm; High: 1,660 rpm
Fan Type: Floor
Power Cap.: 1/8 hp
Phase: Single
Voltage: 120 V
Total No. Of Conductors: 3
Height: 20 1/2 in
Depth: 10 1/2 in
Cord Length: 10 ft

SKU	Blade Size	Mounting
737-F-18-TE	18 in	Floor

Unassembled Circulators

Features:
• Totally enclosed ball bearing motor with pull chain switch.
• Chrome plated double locking steel wire guards.
• Oscillating models sweep horizontally in a 90° arc or can be locked in a fixed position.
Test & Approvals: OSHA; UL
Flow: Low: 1,100 CFM; High: 7,900 CFM
Speed: Low: 800 rpm; High: 6,000 rpm
Fan Type: Stationary
Power Cap.: 1/4 hp
Phase: Single
Voltage: 120 V
Total No. Of Conductors: 3
Height: 4 1/2 ft
Depth: 14 1/2 in
Cord Length: 12 ft

SKU	Blade Size	Mounting
737-ACU30-P	30 in	Pedestal

Refrigeration Regulators & Charging Hoses

REB Series Purging/Testing Regulators

Features:
• KEL‑FTM seat assembly withstands high service pressures.
• Durable tee handles.

SKU	Length	Operating Pressure	Connection Type
312-REB-7-5AC	5.888 in	450 psi	1/4” Male SAE Flare

HEATING EQUIPMENT

Forced Air Heaters

Mr. Heater® Portable BIG Buddy Heaters

Features:
• Ergonomic easy‑carry handle.
• Low oxygen shut‑off pilot safety system for indoor & outdoor use.
• Blower fan power on/off switch.
• Large four‑position heat level control knob with built‑in Piezo starter.
• Integrated hot air blower venting system.
• Attached swing‑open doors with swivel‑out mount for easy cylinder installation.
• Porcelain coated reflector for extended life.
• Dual ceramic burner tiles with shock absorbing floating insulation.
• High‑temperature coated safety wire guard.
• Key shaped rear‑mounting holes for wall mounting.
• Built‑in tip over shut‑off switch.
Test & Approvals: CSA Certified for Indoor Use
Tank Cap.: Attaches to (2) 1 lb or (2) 20 lb Propane Cylinders
Fuel Type: Propane

SKU	Output Power	Working Area
373-MH18B	4,000 Btu/h; 9,000 Btu/h; 18,000 Btu/h	400 sq. ft.

Portable Kerosene Forced Air Heaters

Features:
• Heater shuts off with the loss of flame or power supply.
• Heavy-duty, high output fan.
• Rugged, durable steel construction.
• Built‑in thermostat with 6‑function LED diagnostics, lighted on/off switch, fuel gauge, cord wrap, Easy‑off gas cap.
Tank Cap.: 14 gal
Fuel Type: Kerosene

SKU	Output Power	Working Area
400 ft³/min
373-HS175KT	175,000 Btu/h	4,250 ft²

Portable Electric Heaters

Features:
• 3‑Heat Settings: 600w radiant, 900w fan forced, 1500w radiant and fan forced.
• Temp control thermostat.
• Manual reset type limit control.
• Tip over safety switch.
Phase: Single

SKU	Output Power
737-188TASA	5,120 Btu/h

Infrared & Radiant Heaters

Portable Propane Radiant Heaters

Features:
• Heats radiantly, with no loss of heat to the air.
• Reaches full output in seconds.
• No electricity required.
• Fully assembled, ready for use.
• No noisy, annoying blowers.
• Hi‑medium‑low regulator and soft nose P.O.L.
• Tank (Not Included).
Fuel Type: Propane

SKU	Output Power	Run Time
373-MH15T	14,000 Btu/h	1.5 hours on 1 lb disposable tank (not included)
373-MH30T	20,000 Btu/h	15 h on 20 lb tank

CLAMPING PRODUCTS

Bands

Stainless Steel Bands

Features:
• 201 stainless steel offers good resistance to oxidation and many moderate corrosive agents.
• Can be used with clip style buckles to create band clamps.
• Patented scale imprint on band eliminates guesswork and reduces costly waste.
Length: 100 ft

SKU	Width	Thickness	Tension Cap.	Wt.
Stainless Steel 201
080-C20499	1/2 in	0.03 in	1,500 lb	5.1 lb
080-C20599	5/8 in	0.03 in	1,875 lb	6.4 lb
080-C20699	3/4 in	0.03 in	2,250 lb	7.7 lb

Totes

Features:
• Color‑coded for easy identification, these tough new totes feature a convenient carrying handle and see‑through design to show remaining band.
• Corresponding width buckles required.
Length: 100 ft
Tension Cap.: 1,500 lb

SKU	Width	Thickness
Stainless Steel
080-C204B9	1/2 in	0.03 in

Buckles

Ear-Lokt Buckles

Features:
• Can be used with many types of Band‑It® stainless steel banding providing superior fastening strength.
• For standard duty applications including hose assemblies, cable bundling, and general fastening.
• Can hold a single or double‑wrapped band configuration.
• Band clamps can be formed over any contour or shape.
Quantity: 100 per box

SKU	Width	Material	Wt.
080-C25499	1/2 in	Stainless Steel 201	2.10 lb
080-C25599	5/8 in	Stainless Steel	2.4 lb

Hose Clamp Sets

Make-A-Clamp Kits

Features:
• By simply cutting off a piece of banding from a continuous roll, you can make any size stainless steel worm‑driven clamp from 3 in diameter and up.
• It is a must for anyone likely to encounter requirements for varying sized large clamps.
Includes: 100 ft. Band; (25) Adj. Fasteners; (10) Band Splices

SKU	Band Width	Type
238-4001	1/2 in	Band & Worm Drive Buckle

Clamp Service Kits

Features:
• Contains assorted sizes of zinc plated 2‑Ear Clamps for industrial use and OEM applications.
• Suitable for EPDM rubber hose, plastic tubing, electrical cable, and high‑vibration equipment hoses.
• Tamper‑proof durable seal due to robust construction.
• Ideal for air and fluid media lines.
• Specially deburred edges reduce the risk of damage to the part being clamped.
• Tampering is visible.
• Fast and simple installation.
Includes: (15) of 5/16”; (15) of 3/8”; (15) of 1/2”; (15) of 9/16”; (15) of 5/8”; (12) of 3/4”; (12) of 7/8”; (12) of 15/16”; (12) of 1”; (1) Standard Jaw Pincers; Storage Case
Clamp Diam: 5/16; 3/8; 1/2; 9/16; 5/8; 3/4; 7/8; 1

SKU	Band Width	Type
320-18500056	.276-.394	Two-Ear

Hose Clamps

CP Series Center Punch Clamps

Features:
• Lock with impact from a hammer using a conical punch.
• Double‑wrapped for additional strength.
• Not recommended for use with fittings that may crack as a result of impact.
Thickness: 0.025 in

SKU	Clamp Diam	Width	Material	Quantity	Wt.
080-CP0399	13/16 in	3/8 in	Galvanized Carbon Steel	100 per box	3.6 lb
080-CP16S9	4 in	5/8 in	Stainless Steel 201	25 per box	4.9 lb
080-CP20S9	5 in	5/8 in	Stainless Steel 201	25 per box	5.9 lb

Junior® Smooth I.D. Clamps

Features:
• Vibration‑resistant lip‑wrap lock design.
• Lock is formed by a simple lever movement.
• Unique buckle nest and smooth ID design reduces leak paths.
• Double‑wrapped for additional strength.
• Various materials for different corrosive environments.
Material: Stainless Steel 201
Quantity: 100 per box

SKU	Clamp Diam	Width	Thickness	Wt.
080-JS2409	3/4 in	1/4 in	0.02 in	2 lb
080-JS2019	13/16 in	3/8 in	0.025 in	3.6 lb
080-JS2439	1 in	3/8 in	0.025 in	3.9 lb

50 Series Small Diameter Clamps

Features:
• Full‑size worm drive clamp.
• Versatile applications, from home and auto repair to heavy industrial uses.
• Stainless steel band.
Width: 9/16 in
Material: Stainless Steel 201/301; Housing & Band

SKU	Clamp Diam
420-5020	1 3/4 in

68 Series Worm Drive Clamps

Features:
• All stainless steel construction especially suited for industrial applications.
• High quality.
Width: 9/16 in
Material: Stainless Steel 201/301; Housing & Band

SKU	Clamp Diam
420-6872	5 in

9/16 Hy-Gear® 64-0 Series Worm Drive Clamps

Features:
• High‑nickel grade stainless steel clamp for plumbing, industrial, hardware and other applications requiring greater resistance to corrosion.
• IAPMO listed.
• Note: This product may contain type 201 stainless steel according to latest IAPMO listing and UPC code changes showing comparable performance and corrosion resistance in the various tests.
Material: Stainless Steel 201/301; Housing & Band

SKU	Clamp Diam	Width
420-6420	1 3/4 in	9/16 in

Combo-Hex® 54-0 Worm Drive Clamps

Features:
• Feature an exclusive safety collared deep slotted screw design that prevents screwdrivers from slipping and puncturing the hose wall.
• Combo‑Hex clamps can be installed with a screwdriver, nut driver or socket wrench.
Material: 201/301 Stainless Steel; Housing & Band

SKU	Clamp Diam	Width	Wt.
420-5420	1 3/4 in	9/16 in	0.05 lb
420-5440	3 in	1 in	0.06 lb

Micro-Gear 62M Series Small Diameter Clamps

Features:
• Micro‑Gear clamps are tiny, tough and precision engineered for use in such small hose applications as emission control, fuel lines and vacuum hoses.
• Seal with only 10 inch‑pounds of screw torque.
• No spot welds needed.
Material: Stainless Steel 300; Housing & Band

SKU	Clamp Diam	Width
420-62606	7/8 in	5/16 in

MICRO-GEAR® 62P Series Small Diameter Clamps

Features:
• Tiny micro‑gear clamps are tough and precision‑engineered.
• Suitable for use in such small hose applications as emission control, fuel lines and vacuum hoses.
• Slim width makes these clamps the perfect choice when installing in small or confined areas.
Material: Stainless Steel 201/301; Housing & Band

SKU	Clamp Diam	Width
420-6204	5/8 in	5/16 in

2-Ear Zinc-Plated Hose Clamps

Features:
• Compact one‑piece clamp for robust, secure connections.
• Fast and simple installation, visible deformation provides evidence of proper closure.
• Deburred edges reduce risk of damage to parts being clamped.
• Provides a degree of elasticity to accommodate changes in size of the parts being joined.
Material: Steel, Material No. 1.0338 / SAE 1008/1010; Zinc‑Plated

SKU	Clamp Diam	Hose O.D.	Width	Thickness
320-10100011	0.433 in	- 3/8 in	0.276 in	0.0393 in
320-10100016	0.512 in	- 1/2 in	0.276 in	0.0393 in
320-10100019	0.591 in	- 9/16 in	0.295 in	0.0393 in
320-10100022	0.669 in	- 19/32	0.315 in	0.047 in
320-10100024	0.709 in	- 5/8 in	0.315 in	0.0472 in
320-10100027	0.787 in	- 3/4 in	0.335 in	0.059 in
320-10100029	0.866 in	- 3/16 in	0.354 in	0.059 in
320-10100030	0.906 in	- 7/8 in	0.354 in	0.059 in
320-10100037	1.120 in	- 1-1/8 in	0.394 in	0.059 in

FASTENING PRODUCTS

Clip, Ring & Pin Kits

Cotter Pin Assortments

Features:
• Pins also have chisel point ends.
• One prong extended for easy insertion and bending.
• Pins also have chisel point ends.
Includes: (130) 1/16 x 1 in; (100) 1/8 x 1 1/4 in; (80) 1/8 x 2 in; (150) 3/32 x 1 in; (100) 3/32 x 1 3/4 in; (40) 5/32 x 2 1/2 in; Plastic Box
Qty.: 600 per set

SKU	Material
605-12905	Steel

Hitch Pin Clip Assortments

Features:
• Reusable, quick release pins for fast assembly and disassembly.
• Made of spring steel to maintain tension.
• Handy kit for shop toolroom or toolbox.
Includes: (60) 1/16 in #18; (30) 3/32 in #3; (20) 3/32 in #7; (20) 1/8 in #16; (15) 5/32 in #10; (5) 3/16 in #6; Plastic Box
Qty.: 150 per set

SKU	Material
605-12915	Spring Steel

O-Ring Assortments

Features:
• Creates a tight seal for fluid or gas connections.
• Made of BUNA‑N 70 durometer rubber compound.
• Handy kit for shop toolroom or toolbox.
Includes: (140 pcs) ‑ 1/16 in. Body; (80 pcs) ‑ 3/32 in. Body; (80 pcs) ‑ 1/8 in. Body; Plastic Box

SKU	Material
605-12930	Buna-N

Roll Pin Assortments

Features:
• Chamfered ends simplify insertion.
• Made of flexible spring steel, cold rolled, hardened and tempered.
• Handy kit for shop toolroom or toolbox.
Includes: 4 Lengths Included for Each Size: 1/16 in; 5/64 in; 3/32 in; 1/8 in; 5/32 in; 3/16 in; 7/32 in; 1/4 in; 5/16 in; 3/8 in; Plastic Box
Qty.: 300 per set

SKU	Material
605-12925	Spring Steel

Clips, Rings & Pins

Air King Steel Safety Clips

Features:
• Same size for all coupling sizes.
• Used to ensure couplings will not become accidentally disconnected.
Material: Steel
Quantity: 25 per bag

SKU	Pin Size	Length
238-AC1	0.08 in	1 3/4 in

Screw Anchor Expanders

Features:
• Quickly and securely set expansive screw anchors in masonry, regardless of thickness.
• Patented.
Material: Alloy Steel

SKU	Expansive Belt Size	Used With	Wt.
332-868	1/4 in - 20	84299	0.40 lb
332-870	3/8 in - 16	84305	0.43 lb

Velcro Fasteners

Dual Lock™ Reclosable Fasteners

Features:
• Clear acrylic adhesive on the back of a clear polypropylene reclosable fastener.
• It has 250 stems per square inch.
• Closure life: 1,000 times.
Applications: General Industrial, Specialty Vehicles, Transportation, Military, Packaging, Medical, Point of Purchase Displays, Exhibits, Electronics, Construction, Furniture, Maintenance Repair and Operations (MRO).
Thickness: 0.23 in
Color: Clear
Material: Polypropylene
Quantity: 2 per pack

SKU	Length	Width
405-051131-06463	5 yd	1 in

STRAPPING PRODUCTS

Cable Ties

General Purpose Cable Ties

Features:
• Nylon 6/6 features light weight, high strength and a wide temperature range.
• Even at higher than recommended temperatures or exposure to flame, nylon does not give off toxic or irritating by‑products.
Material: Nylon 6/6

SKU	Length	Width	Thickness	Tensile Strength	Bundle Diam	Color
102-750N	7.6 in	0.18 in	0.054 in	50 lb	2 in	Natural
102-750YEL	7.6 in	0.18 in	0.054 in	50 lb	2 in	Yellow
102-1150N	11.1 in	0.18 in	0.054 in	50 lb	3 in	Natural
102-1150RED	11.1 in	0.18 in	0.054 in	50 lb	3 in	Red
102-1150YEL	11.1 in	0.18 in	0.054 in	50 lb	3 in	Yellow
102-1450N	14.6 in	0.18 in	0.054 in	50 lb	4 in	Natural
102-15120N	15 in	0.298 in	0.069 in	120 lb	4 in	Natural

UV Stabilized Cable Ties

Features:
• General purpose use.
• Nylon 6/6 features light weight, high strength and a wide temperature range.
• Contains increased resistance to UV light (does not totally eliminate the destructive effects of the light).
Color: Black
Material: Nylon 6/6

SKU	Length	Width	Thickness	Tensile Strength	Quantity
102-750UVB	7.6 in	0.18 in	0.054 in	50 lb	100 per bag
102-750UVB-B	7.6 in	0.18 in	0.054 in	50 lb	1000 per bag
102-9120UVB	9 in	0.298 in	0.069 in	120 lb	100 per bag
102-1150UVB	11.1 in	0.18 in	0.054 in	50 lb	100 per bag
102-1150UVB-B	11.1 in	0.18 in	0.054 in	50 lb	1000 per bag
102-12120UVB	12 in	0.298 in	0.069 in	120 lb	100 per bag
102-1450UVB	14.6 in	0.18 in	0.054 in	50 lb	100 per bag
102-15120UVB	15 in	0.298 in	0.069 in	120 lb	50 per bag
102-24175UVB	24.5 in	0.335 in	0.087 in	175 lb	50 per bag
102-36175UVB	36 in	0.335 in	0.087 in	175 lb	50 per bag

Heavy-Duty Cable Ties

Features:
• DoubleLock™ design has teeth on both sides of the tie.
• Durable nylon construction.
• Great for bundling wire, cable, hose, ducts and countless other applications.

SKU	Length	Width	Thickness	Tensile Strength	Color	Quantity
623-46-408UVB	8 in	0.25 in	0.072 in	120 lb	Black	100 per bag
623-46-412UVB	12 in	0.25 in	0.072 in	120 lb	Black	100 per bag
623-46-415UVB	15 in	0.25 in	0.072 in	120 lb	Black	50 per bag
623-46-415	15 in	0.25 in	0.072 in	120 lb	Natural	50 per bag
623-46-418UVB	18 in	0.35 in	0.07 in	175 lb	Black	50 per bag
623-46-418	18 in	0.35 in	0.07 in	175 lb	Natural	50 per Bag
623-46-421UVB	21 in	0.35 in	0.07 in	175 lb	Black	50 per bag
623-46-424UVB	24 in	0.35 in	0.07 in	175 lb	Black	50 per bag
623-46-424	24 in	0.35 in	0.07 in	175 lb	Natural	50 per bag
623-46-436UVB	36 in	0.35 in	0.07 in	175 lb	Black	50 per bag
623-46-436	36 in	0.35 in	0.07 in	175 lb	Natural	50 per bag
623-46-448UVB	48 in	0.35 in	0.07 in	175 lb	Black	50 per bag

Standard Cable Ties

Features:
• Patented DoubleLock™ design has teeth on both sides of the tie, ensuring 50% greater strength than industry standards.
• Made from durable 6/6 nylon material.
• Serviceable through temperatures of 32° ‑ 185° F.
• Great for bundling wire, cable, hose, ducts, and countless other applications.
Test & Approvals: UL Recognized Component Listing E125869; Meets UL 94 V‑2 Flammability Classification
Thickness: 0.055 in

SKU	Length	Width	Tensile Strength	Bundle Diam	Color	Quantity
623-46-206UVB	5 in	1/2 in	45 lb	1 3/8 in	Black	100 per bag
623-46-308UVBMN	8 in	0.17 in	75 lb	2 in	Black	1,000 per bag
623-46-308UVB	8 in	0.17 in	75 lb	2 in	Black	100 per bag
623-46-308MN	8 in	0.17 in	75 lb	2 in	Natural	1,000 per bag
623-46-308	8 in	0.17 in	75 lb	2 in	Natural	100 per bag
623-46-310UVB	11 in	0.17 in	75 lb	3 in	Black	100 per bag
623-46-310M	11 in	0.17 in	75 lb	3 in	Natural	1,000 per bag
623-46-310	11 in	0.17 in	75 lb	3 in	Natural	100 per bag
623-46-315UVB	14 in	0.17 in	75 lb	4 in	Black	100 per bag
623-46-315M	14 in	0.17 in	75 lb	4 in	Natural	1,000 per bag
623-46-315	14 in	0.17 in	75 lb	4 in	Natural	100 per bag

Strap Tensioners & Adaptors

Center Punch Clamping Tools

Features:
• Ratchet action tensioning tool for applying Center Punch and Center Punch Open‑End clamps with a Center Punch style lock.
• 3/8in adapter included.

SKU	Band Width	Used With	Wt
080-T30069	- 5/8 in	BAND-IT® Band; BAND-FAST®; VALU-STRAP™ ; VALU-STRAP™ Plus; Valuband; Other Steel Bands	3.15 lb
080-S03869	3/8 in - 5/8 in	—	1.1 lb

Clamping Tools

Features:
• Use to apply band, strapping and Free‑End Clamps.
• Spring‑loaded gripper lever and friction‑held cutoff lever with plastic grip improves ease‑of‑use.
Tension Cap.: 2,400 lb
Used With: Band‑IT® Bands; Band‑Fast®; VALU‑STRAP™; VALU‑STRAP™ Plus; Valuband; Other Steel Bands
Material: Carbon Steel
Handle Type: Spin Handle

SKU	Strap Width	Band Width
080-C00169	-	3/16 in - 3/4 in

Pok-It II Clamping Tools

Features:
• Lightweight pocket tool with cutter.
• Portable and convenient for general banding tasks.
• Easy to use.
Used With: Band‑IT® Bands; Band‑Fast® Bands; Other Brands
Material: Plastic; Steel
Handle Type: Straight Handle with Cutting Tool

SKU	Strap Width	Band Width
080-J02069	-	1/4 in - 3/16 in

Tie Wire

Mechanics Wires

Features:
• Economical solution for many specialized applications.
• Controlled in production to secure full gauge, good finish and high quality.

SKU	Wire Size	Material	Wt.
132-20101	14 gauge	Steel	5 lb
132-77556	16 gauge	Steel	2 lb
132-77552	16 gauge	Steel	5 lb
132-77553	18 gauge	Steel	5 lb

Tie Wires

Features:
• These sturdy, versatile tie wires are efficient for indoor and outdoor jobs.
• Made of stainless steel or black annealed finish, the tie wires are essential for fastening items together.
• Wires have a high level of strength and are capable of handling heavy items.
Wt.: 3 1/2 lb

SKU	Wire Size	Material
132-77532	14 gauge	Black Annealed
132-71572	16 gauge	Black Annealed
132-77536	16 gauge	Galvanized
132-16-SS	16 gauge	Stainless Steel
132-18-SS	18 gauge	Stainless Steel

Tie Wire Accessories

Tie-Wire Reels

Features:
• Load 12‑18 gauge wire without removing the cover.
• Smooth aluminum alloy with wear parts made of steel.
• Feeds pre‑coiled wire smoothly, easily, and quickly to save time and reduce wasted wire.
• Designed for left‑ or right‑hand use.
• Large, comfortable rewind knob.
Dia.: 6 1/4 in
Material: Aluminum Alloy;Steel
Type: Steel Construction

SKU	Width
409-27400	2 15/16 in

BENDING & FLARING TOOLS

Flaring & Swaging Tools

Swaging Tools

Features:
• For swaging ferrules onto wire rope or cable.
• Do Not use on coated cable.
• If used on coated cable, remove the coating from the assembly area.

SKU	Material	Length
193-7679038	Steel	21 in

Flaring Tools

Features:
• This precision tool provides smooth, uniform flares with minimum effort.
• Hardened steel flaring cone, eccentrically mounted in needs bearing, produces rolling action for even metal flow.
• Gives uniform flare walls without galling.
• Handle clutch releases when flare is complete to iron and smooth flare.
• Inch and metric sizes.

SKU	Tube O.D.	Flaring Angle
632-83037	1/8 in; 3/16 in; 1/4 in; 5/16 in; 3/8 in; 1/2 in; 5/8 in; 3/4 in	45 °
632-41162	3/16 in, 1/4 in, 5/16 in, 3/8 in, 1/2 in, 5/8 in, 3/4 in	37 °

Hand Benders

364-FHA Lever Type Tube Benders

Features:
• Each tool bends one size.
• Open side type which slips over tube at any point.
• Makes smooth tight radius bends up to 180° with minimum effort.
• For bending annealed copper and aluminum tubing only; no scoring or flattening of tubing.
• Calibrated to show angle of bend.
• Wide hook grips tubing securely.
• For bending annealed copper and aluminum tubing only.
Test & Approvals: Conforms to Federal Specifications GGG‑B‑191a Type III, Class 2
Body Material: Steel

SKU	Radius	Tube O.D.	Overall Length
389-364-FHA-08	1-1/2 in	1/2 in	19 in
389-364-FHA-06	15/16 in	3/8 in	14 in
389-364-FHA-04	9/16 in	1/4 in	10 in

364-FHB Swivel Handle Tube Benders

Features:
• Patented series that has a swivel handle that can be repositioned midway through a bend when both handles begin to meet.
• Allows fabrication of bends up to 180° with reduced effort, better control and without the crossing of handles, typical of most other lever type benders.
Test & Approvals: GGG‑B‑191a Type III, Class 2
Throat Depth: ‑
Body Material: Steel
Color: Sliver

SKU	Radius	Tube O.D.	Overall Length	Jaw Width
389-364-FHB08	1-1/2 in	1/2 in	19 in	—
389-364-FHB06	15/16 in	3/8 in	14 in	4 in
389-364-FHB04	9/16 in	1/4 in	10 in	—

Triple Header Benders

Features:
• Calibrated markings for making accurate left‑hand, right and offset bends.
• Optimum bending radius for each tubing size.
• Cushion grips for extreme comfort.
Overall Length: 14 in
Body Material: Steel
Color: Silver/Blue

SKU	Radius	Tube O.D.
389-370-FHC	11/16 in; 1-1/8 in; 1-1/2 in	3/16 in; 1/4 in; 3/8 in; 1/2 in

400 Series Instrument Benders

Features:
• Offset cushion grip handles eliminate knuckle cracking when forming 180° bends.
• A 90° start angle and unique oil absorbing shoe minimize bending effort while forming accurate bends in copper, steel and stainless steel tubing.
Body Material: Steel
Finish: Powder Coat
Color: Black

SKU	Tube O.D.	Overall Length	Jaw Width
632-36122	1/4 in	9 in	1 in
632-36097	3/8 in	12 in	1 in
632-36132	1/2 in	18 in	1 in

456 Tri-Benders

Features:
• The 456 Tri‑Bender is designed to easily bend three different sizes of soft tubing with the same tool.
• A 90º start angle minimizes effort required to form a bend.
• Handy reference marks indicate the angle for quick bends through 90º.
Overall Length: 8‑1/2 in
Finish: Paint

SKU	Radius	Tube O.D.
632-44852	1/4 in: 1.01 in, 5/16 in: 0.98 in, 3/8 in: 0.95 in	1/4 in, 5/16 in, 3/8 in

600 Series Instrument Benders

Features:
• A simple two‑stage handle design easily switches to bend up to 180°, keeping bends in plane and accurate.
• The RIDGID® 600 series lever benders are specially designed for bending hard tubing such as stainless steel, steel, and titanium.
Finish: Powder Coat
Color: Silver

SKU	Overall Length	Body Material
632-38048	16 in	Stainless Steel
632-38043	21 in	Stainless Steel

Geared Ratchet Tube Benders

Features:
• These tools, with high geared mechanical ratios, bend heavy‑wall steel tube (up to 1/8” wall thickness), stainless steel tube (up to 3/32” wall thickness), and hard copper water tube (types K and L).
• Benders produce uniform bends up to 180°, with no need to anneal tubing or use special temper grade tubing.
Overall Length: 21 in
Jaw Width: 1 in
Body Material: Aluminum
Finish: Powder Coat

SKU	Tube O.D.
632-35175	3/4 in

Heavy Duty Instrument Benders

Features:
• Two‑stage design allows for in‑place bending from 90 ° to 180 ° without ever crossing handles.
• Lock/unlock with a half turn rotation of the bending handle.
• Extra long 16 in handles increase leverage and roll dies in the bending form reduce force needed.
Overall Length: 16‑1/2 in
Throat Depth: 5/8 in
Jaw Width: 1/4 in
Body Material: Carbon Steel
Finish: Chrome

SKU	Radius	Tube O.D.
632-38033	5/8 in	1/4 in

CHISELS, PUNCHES & PINS

Chisels

Cold Chisels

Stock Shape: Hex
Finish: Black Oxide
Tip Type: Beveled

SKU	Cutting Width	Overall Length	Stock Size	Quantity	Wt.
479-10220	1 in	8 in	7/8 in	6 per box	1.25 lb
479-10205	1/2 in	6 in	7/16 in	12 per box	0.26 lb
479-10212	3/4 in	7 in	5/8 in	12 per box	0.6 lb

Extra Long Cold Chisels

Stock Shape: Hex
Finish: Black Oxide
Tip Type: Beveled

SKU	Cutting Width	Overall Length	Stock Size	Quantity	Wt.
479-10207	1/2 in	12 in	7/16 in	12 per box	0.53 lb
479-10213	3/4 in	12 in	5/8 in	6 per box	1.09 lb

Floor Chisels

Features:
• Used to cut and trim wood and to pull tongue and groove materials together.
• Thin blade allows for access to tight spaces.
• Made of solid alloy steel for long-lasting durability and dependability.
Stock Shape: Hex
Applicable Materials: Wood
Finish: Sand Blasted
Tip Type: Beveled
Quantity: 6 per box

SKU	Cutting Width	Overall Length	Stock Size	Wt.
479-12310	2 1/2 in	10 1/2 in	5/8 in	0.92 lb
479-12311	3 in	11 in	3/4 in	1.38 lb

Pins

Broad-Head Bull Pins

Features:
• Drop‑forged, heat‑treated.
• Head design also reduces chance of pin slipping from the hand when aligning holes.
• Angled head and smooth blending of radii increase strength and reduce the danger of chipping.
Material: Forged Steel
Finish: Black Oxide
Type: Bull Pin

SKU	Point Diam	Overall Length	Dia.	Wt.
409-3256	1/4 in	10 in	1 1/16 in	1.62 lb
409-3255	5/16 in	13 in	1 1/4 in	3 lb

Punch & Chisel Parts & Accessories

Punch & Chisel Holders

Features:
• 4‑sided handle prevents roll away.
• Nylon insert absorbs shock.
• For holding chisels and punches up to 1” in diameter reducing the risk of injury.
Wt.: 0.66 lb

SKU	Overall Length	Type
577-2108	8-1/2 in	Punch & Chisel Holder

Punch & Chisel Sets

Punch Sets

Features:
• Properly hardened.
• Used for accurate transferring of threaded, drilled or tapped holes.
Includes: 28 Punches 3/23 in ‑ 19/64 in; Rack
Stock Shape: Round
Material: Hardened Steel
Finish: Black Oxide
Quantity: 28 per set

SKU	Cutter Diam
565-K-358	3/32 in; 7/64 in; 1/8 in; 9/64 in; 5/32 in; 11/64 in; 3/16 in; 13/64 in; 7/32 in; 15/64 in; 1/4 in; 17/64 in; 9/32 in; 19/64 in; 5/16 in; 21/64 in; 11/32 in; 23/64 in; 3/8 in; 25/64 in; 13/32 in; 27/64 in; 7/16 in; 29/64 in; 15/32 in; 31/64 in; 1/2 in; 17/32 in

8 Pc. Drive Pin Punch Sets

Features:
• 4 in long with knurled bodies.
• Heat‑treated tool steel with centerless‑ground ends.
Includes: Plastic Case
Stock Shape: Round
Material: Tool Steel
Finish: Black Oxide
Quantity: 8 per case

SKU	Tip Size
318-SPC75	1/16 in; 3/32 in; 1/8 in; 5/32 in; 3/16 in; 7/32 in; 1/4 in; 5/16 in

Arch Punch Sets

Features:
• Heat treated Sheffield forged steel.
• Machined to close tolerances for creating precise holes in gasket material, rubber and soft metals.
Includes: Plastic Roll Pouch
Stock Shape: Inside Taper for Clearance
Material: Steel
Quantity: 7 per roll

SKU	Cutter Diam	Tip Size
318-1271ST	1/4 in; 3/8 in; 1/2 in; 5/8 in; 3/4 in; 7/8 in; 1 in	1/4 in; 3/8 in; 1/2 in; 5/8 in; 3/4 in; 7/8 in; 1 in

14 Pc. Punch & Chisel Kits

Features:
• Convenient kit is constructed of high quality alloy steel.
• Heat treated for strength and durability.
• Black oxide finish for maximum corrosion protection.
Includes: Cold Chisels: 1/4, 3/8, 1/2, 5/8, 3/4; Pin Punches: 3/32, 1/8, 5/32, 3/16, 1/4; Solid Punches: 1/8, 3/16; Line‑Up Punch: 1/8 in; Center Punch: 3/8
Finish: Black Oxide

SKU	Stock Shape	Material
479-61044	Hex	Alloy Steel

24 Piece Punch & Chisel Kits

Features:
• Cold chisels are used for cutting, shaping, and removing metal softer than the cutting edge of the chisel.
• Cape chisels are used for cutting keyways and similar flat grooves.
• Diamond point chisels are used for cutting V grooves or sharp internal corners.
• Half round nose chisels are used for cutting round grooves in metal.
• Solid punches are for loosening frozen or tight pins and keys, or knocking out rivets.
• Pin punches are used for driving out and removing already loosened pin after initial movement by a solid punch.
• Made in the USA.
Includes: Cold Chisel: 1/4, 5/16, 3/8, 1/2, 5/8, 3/4; Cape Chisel: 1/4; Diamond Point Chisel: 1/4; Half Round Nose Chisel: 1/4; Solid Punch: 3/32, 1/8, 3/16, 1/4, 5/32, 5/16; Pin Punch: 3/32, 1/8, 5/32, 3/16, 1/4, 5/16; 5/16™ Prick Punch; Center Punch: 3/8, 1/2
Material: Alloy Steel
Finish: Black Oxide

SKU	Stock Shape	Tip Size
479-61050	Hex	3/8 in; 1/2 in; 5/8 in; 3/4 in; 3/32 in; 1/8 in; 5/32 in; 3/16 in; 1/4 in; 5/16 in

Punch and Chisel Sets

Features:
• Manufactured from high quality alloy steel and heat treated for strength.
• Cutting edges are drop forged and precision ground for durability.
• Ideal for the home or workshop.
Test & Approvals: Meets or Exceeds Federal and ANSI Specifications
Includes: (1) Cold Chisel 1/2 x 6 1/2 in; (1) Cold Chisel 5/8 x 7 in; (1) Cold Chisel 3/4 x 8 in; (1) Cold Chisel 7/8 x 8 in; (1) Cold Chisel 7/8 x 10 in; (1) Cold Chisel 1 x 10 in; (1) Taper Punch 1/8 x 6 in; (1) Taper Punch 7/32 x 10 in; (1) Taper Punch 3/8 x 12 in; (1) Center Punch 5/32 x 6 in; (1) Center Punch 7/32 x 8 in; (1) Pin Punch 3/8 x 8 in; Pouch
Stock Shape: Hex
Material: Chrome Vanadium Steel
Finish: Shot Peened
Quantity: 12 per set

SKU	Tip Size
680-16-299	1/8 in; 5/32 in; 7/32 in; 3/8 in; 1/2 in; 5/8in; 3/4 in; 7/8 in; 1 in

7 Pc. Super-Duty Drive Pin Punch Sets

Features:
• 1 piece design.
• Shock resistant tool steel.
• Hand ground cutting edge.
• Hardened, quenched, and tempered to precise specifications.
Includes: Kit Pouch
Material: Alloy Steel

SKU	Tip Size
577-48007	1/16 in; 3/32 in; 1/8 in; 5/32 in; 3/16 in; 7/32 in; 1/4 in

Drift Punch Sets

Features:
• Made from S2 steel and specially heat‑treated for strength and durability.
• One‑piece design for strength and durability.
• Reverse taper to help prevent binding.
• Modified parabolic striking end to help reduce mushrooming and chipping.
• Black oxide finish to help prevent rust corrosion; extending tool life and performance.
• A polished identification panel on one of the flats is marked with the tool number and size in a black inlay.
• Set offers a wide range of sizes to handle a variety of jobs.
• Includes a pouch for convenient storage solution.
Includes: Tool Roll, 7 Pockets
Stock Shape: Round
Material: S2 Steel
Finish: Black Oxide
Quantity: 7 per pouch

SKU	Tip Size
577-96A	3/32 in; 1/8 in; 3/16 in; 7/32 in; 1/4 in; 5/16 in; 3/8 in

Punch & Chisel Sets

Features:
• A larger striking surface than standard chisels allows the safe use of a larger striking tool and directs more power to the cutting edge.
• Cutting edge is ground to exact angle for easy cutting.
• A polished identification panel on one of the flats is marked with the tool number and size in a black inlay.
• Hardened, quenched, and tempered to precise specifications.
Stock Shape: Round
Material: Alloy Steel
Finish: Black Oxide

SKU	Tip Size	Includes	Quantity	Wt.
577-2	1/16 in; 1/2 in	(1) Center Punch; (3) Drive Pin Punches 5/64, 7/64, 11/64 in; (3) Starting Punches 1/16, 1/8, 3/16 in; (1) Diamond Point 3/16 in.; (3) Cold Chisels 5/16, 7/16, 1/2 in	12 per pouch	1.62 lb
577-46	5/64 in; 13/16 in	(2) Center Punches; (1) Prick Punch; (6) Drive Pin Punches 5/64, 7/64, 5/32, 11/64, 13/64, 15/64 in; (5) Starting Punches 3/32, 1/8, 3/16, 7/32, 1/4 in; (9) Cold Chisels 1/4 - 13/16 in; (3) Drift Punches 1/8, 3/16, 1/4 in	26 per pouch	9-3/4 lb

Punches

Arch Punches

Features:
• Inside taper permits the punchings to clear easily through the barrel.
• Punches have fully polished barrel and black enamel handle.
• Additional sizes available upon request.
Stock Shape: Round

SKU	Tip Size	Tip Type	Material
565-149-3/4	3/4 in	Round	Drop Forged Steel
565-149-5/8	5/8 in	Round	Carbon Steel

Ball Bearing Automatic Center Punches

Features:
• Unique ball bearing action.
• All‑steel solid point is replaceable.
• Long wearing alloy steel parts.
Overall Length: 5 in
Stock Shape: Round
Material: Aluminum

SKU	Tip Size	Tip Type
318-77	1-1/4 in	Pointed

Heavy-Duty Steel Automatic Center Punches

Features:
• Replaceable hardened steel point and shaft.
• Spring tension adjusts for light or heavy strokes and marking.
• One‑handed spring impact operation; no hammer needed.
Overall Length: 6 in
Stock Shape: Round
Material: Steel

SKU	Tip Size	Tip Type
318-78	.083 in	Pointed

Mini Heavy-Duty Automatic Center Punches

Features:
• One‑handed spring impact operation; no hammer needed.
• Spring tension adjusts for light or heavy strokes and marking.
• All‑steel body with knurled finger grip, and rust‑resistant black oxide finish.
• Replaceable hardened steel point.
• Dimensions 4‑7/8 in.
• (L) x 1/2 in.
• (Diameter).
Overall Length: 5 in
Stock Shape: Straight
Material: Steel

SKU	Tip Size	Tip Type
318-79	.055 in	Pointed

Automatic Center Punches

Features:
• Tension of regulating spring is constant, so marks made by point are uniform in depth and size for each setting.
• No hammer required, mechanism automatically strikes a blow when downward pressure is applied.
• Adjustable knurled cap regulates force of blow.
• All working parts are made of properly hardened tool steel.
Overall Length: 5 in
Material: Steel

SKU	Tip Size	Tip Type
681-50120	9/16 in	Pointed

Center Punches

Features:
• Center punches are used for piercing, marking or starting drills in metal and other materials.
• A black oxide finish is added to protect from rust.
• Designed using state‑of‑the‑art technology and with customers in mind.
Overall Length: 6 in
Stock Shape: Hex
Material: Alloy Steel

SKU	Tip Size	Tip Type
479-74003	5/16 in	Pointed

Center Punches - Full Finish

Features:
• Used for piercing, or marking for starting drills, in metal and other materials.
• Point sizes vary for larger or smaller holes.
• Available in black oxide finish for additional rust protection.
Stock Shape: Hex
Material: Alloy Steel

SKU	Tip Size	Tip Type	Overall Length
479-24002	3/16 in	Pointed	5 in
479-24004	3/8 in	Pointed	6-1/4 in
479-24003	5/16 in	Pointed	6 in

Extra Long Pin Punches - Full Finish

Features:
• For driving out and removing already loosened pins and keys after initial movement by a solid punch.
• Full finish.
Overall Length: 8 in
Stock Shape: Hex
Material: Alloy Steel

SKU	Tip Size	Tip Type
479-21500	1/8 in	Round
479-21506	5/32 in	Round

Line-Up Punches - Full Finish

Features:
• Used to align holes through which rivets, pins, or bolts will be inserted.
• Not for use when driving pins, rivets, or bolts.
• Variable point size, shank size, and taper length for the perfect alignment.
• Black oxide finish for additional rust protection.
Stock Shape: Hex
Material: Alloy Steel

SKU	Tip Size	Tip Type	Overall Length
479-22003	1/4 in	Round	12 in
479-22011	5/32 in	Round	9 in

Long Aligning Punches

Features:
• Modified parabolic striking end for greater resistance to mushrooming and chipping.
• For lining up holes in flanges, assemblies, and for other mating parts and for removing long pins and shafts.
Test & Approvals: ANSI Spec. B209.2

SKU	Tip Size	Tip Type	Overall Length	Stock Shape	Material
577-155/8	3/16 in	Round	16 in	Hex	Tool Steel

CLAMPS & VISES

Clamps & Spreaders

Medium-Duty One-Handed Bar Clamps

Features:
• Evenly distributes up to 300 lbs. of sustained clamping force.
• I‑beam bar to reduce flexing and bowing.
• New grip design and Quick‑Release™ trigger provide simple, one‑handed operation
Body Material: Steel

SKU	Opening Size	Load Cap	Throat Depth	Wt.
586-1964717	6 in	300 lb	3-1/4 in	1.8 lb
586-1964718	12 in	300 lb	3-1/4 in	1.5 lb

Maxipress F Piston Clamps

Features:
• Rolled spring steel bar provides maximum pressure held throughout the whole job.
• Fixed jaw surface is grooved to achieve maximum grip.
• Spring activated back brake keeps moving jaw firmly in position.
• Covered double‑threaded screw doubles both pressure and speed with a greasing hole for optimum lubrication.
• Dismountable, interchangeable easy grip handle.
Bar Thickness: .3 in
Spindle Dia: 1.1 in
Load Cap.: 2025 lb
Bar Width: 1.4 in

SKU	Opening Size	Throat Depth	Wt.
848-60020	8 in	5 in	4.7 lbs
848-60030	12 in	5 in	5.2 lb
848-60040	16 in	5 in	5.7 lb
848-60050	20 in	5 in	6.1 lb
848-60060	24 in	5 in	6.6 lb

Maxipress R Piston Clamps

Features:
• Rolled spring steel bar provides maximum pressure held throughout the whole job.
• Fixed jaw surface is grooved to achieve maximum grip.
• Spring activated back brake keeps moving jaw firmly in position.
• Covered double‑threaded screw doubles both pressure and speed with a greasing hole for optimum lubrication.
• Dismountable, interchangeable easy grip handle.
Load Cap.: 2025 lb
Bar Width: 1.6 in
Bar Thickness: 0.4 in
Spindle Dia: 1.2 in

SKU	Opening Size	Throat Depth	Wt.
848-61030	12 in	6 in	7.7 lb
848-61040	16 in	6 in	8.4 lb
848-61050	20 in	6 in	9.1 lb
848-61060	24 in	6 in	9.8 lb

Regular Duty I-Bar Clamps

Features:
• Patented, quick action, no slip clutches are 3/4 in apart and formed in the web for greater bar strength.
• High strength ductile slide cannot slip or bind, easily released.
Load Cap.: 6,000 lb
Bar Width: 1‑1/2 in
Bar Thickness: 7/16 in
Spindle Dia: 5/8 in
Body Material: Steel
Handle Type: Crank Handle

SKU	Opening Size	Throat Depth
825-21806	72 in	1-13/16 in

Replacement Sliding Arm Assemblies

Features:
• Replacement sliding arm assembly can be used to replace worn or broken parts.
• They help keep c‑clamps in working order.
Type: Sliding Arm Assembly

SKU	Used With	For Model
013-3100399	C-Clamp	2400 Series
013-3100400	C-Clamp	4800 & 8500 Series

Drop Forged C-Clamps

Features:
• Extra throat depth.
• Non‑slip clamping on all shapes.
• Steel spindles are copper plated for spatter protection.
• Swivel pads adjust freely to bear evenly on clamped part.
• Individually boxed for easy storage and protection.
Type: C‑Clamp
Body Material: Drop Forged Steel
Handle Type: Sliding Pin
Handle Material: Steel

SKU	Overall Length	Opening Size	Throat Depth	Pressure	Spindle Dia
102-402C	2 in	2-1/8 in	2-1/4 in	3,500 lb	9/16 in
102-404C	4 in	3-1/4 in	3-1/4 in	6,200 lb	3/4 in
102-406C	6 in	6-1/16 in	4-1/8 in	6,900 lb	3/4 in
102-408C	8 in	8-1/4 in	5 in	6,600 lb	3/4 in
102-410C	10 in	12-1/4 in	6 in	8,000 lb	3/4 in
102-412C	12 in	12-1/4 in	6-5/16 in	9,300 lb	7/8 in

Locking C-Clamps

Features:
• Easy to lock.
• Easy to release.
Type: Locking C‑Clamp
Throat Depth: 2.625 in
Body Material: Alloy Steel

SKU	Opening Size	Overall Length
100-AB-11RI	3 3/4 in	11 in

Locking C-Clamps

Features:
• Corrosion‑resistant nickel‑plated finish.
• Compound action for powerful non‑slip locking grip.
• Maximum jaw opening per ASME specs.
Body Material: Steel
Handle Type: Locking Grip
Handle Material: Steel

SKU	Overall Length	Type
181-C11CCVN	11 in	With Regular Pad Tips
181-C11CCSVN	11 in	With Swivel Pad Tips

C-Clamps

Features:
• Double‑rolled thread for faster clamping and increased durability.
• Larger swivel pad reduces marring on work surface and increases stability.
• Larger handle for greater clamping pressure with less effort and reduced hand fatigue.

SKU	Opening Size	Throat Depth
586-225104	4 in	4 in
586-225106	6 in	7 in

The Original™ Locking C-Clamps with Regular Tips

Features:
• Wide‑opening jaws provide greater versatility in clamping a variety of shapes.
• Turn screw to adjust pressure and fit.
• Constructed of high‑grade heat‑treated alloy steel.
• Classic trigger release designed to provide maximum locking force.
Test & Approvals: ASME B107.36‑2002
Pressure: Adjustable Turn Screw
Body Material: Heat‑Treated Alloy Steel
Handle Type: Vise‑Grip Release
Handle Material: Heat‑Treated Alloy Steel

SKU	Opening Size	Overall Length	Throat Depth
586-24R	10 in	24 in	15-1/2 in
586-6R	2-1/8 in	6 in	1-1/2 in
586-11R	4 in	11 in	2-5/8 in
586-9DR	4-1/2 in	9 in	4-3/4 in
586-18DR	7-1/2 in	18 in	9-1/2 in
586-18R	8 in	18 in	9-1/2 in

400 Series C-Clamps

Features:
• Drop forged steel frame, regular duty with extra deep‑throat.
• Black oxide spindles and perma‑pad® resist corrosion and are replaceable.
• Innovative frame geometry for maximum strength.
Handle Type: Sliding Pin
Handle Material: Steel

SKU	Opening Size	Throat Depth	Pressure	Spindle Dia
825-14228	3 in	2 1/2 in	3,500 lb	9/16 in
825-14242	4 1/4 in	3 1/4 in	6,200 lb	3/4 in
825-14256	6 1/16 in	4 1/8 in	6,600 lb	3/4 in
825-14270	8 1/4 in	5 in	6,900 lb	3/4 in
825-14284	10 1/8 in	6 in	8,000 lb	3/4 in

400-P Series C-Clamps

Features:
• Serrated Perma‑Pad® and grooved anvil.
• Copper plated spindles and Perma‑Pads® for resistance to welding spatter and corrosion.
Type: C‑Clamp
Spindle Dia: 3/4 in
Body Material: Forged Steel
Handle Type: Sliding Pin
Handle Material: Steel

SKU	Opening Size	Throat Depth	Pressure
825-14257	0 - 6 1/16 in	4 1/8 in	6,600 lb
825-14243	4 1/4 in	3 1/4 in	—
825-14271	8 1/4 in	5 in	6,900 lb

540 Series Carriage C-Clamps

Features:
• Frames made from high strength ductile iron castings.
• Sliding pin (vise type) handle, single acme thread rolled spindle and oscillating ball and socket tip.
Type: C‑Clamp
Throat Depth: 2 3/4 in
Pressure: 2,450 lb
Spindle Dia: 5/8 in
Body Material: Cast Iron
Handle Type: Sliding Pin
Handle Material: Steel

SKU	Opening Size
825-22005	0 - 6 in

800 Series Forged C-Clamps

Features:
• Regular duty with standard throat depth.
• Wilton® Perma‑Pads®.
Throat Depth: 2‑5/16 in
Pressure: 3700 lb
Spindle Dia: 5/8 in
Body Material: Forged Steel
Handle Type: Sliding Pin
Handle Material: Steel

SKU	Opening Size	Overall Length
825-14742	4 in	10.1 in

2400S Series Bar Clamps

Features:
• Patented rail profile offers more clamp force with fewer spindle turns.
• Heat treated, high carbon Acme threaded screw is tempered and quenched to give greater loading capacity and longer service life.
• High‑strength electro‑galvanized sliding pin T‑handle features rounded ends for comfort, size engineered to load capacity.
Load Cap.: 2,800 lb
Style: Regular Duty
Spindle Diam: 0.78 in
Body Material: Steel
Body Finish: Satin
Handle Type: Sliding Pin T‑Handle
Handle Material: Tempered Steel

SKU	Opening Size	Throat Depth
013-2400S-12	12 in	5 1/2 in

ClassiX™ Heavy Duty Pad Clamps

Features:
• All‑steel bar clamp with heavy‑duty pad.
• Heat‑treated, high carbon ACME threaded spindle provides durability and high‑load capacity.
• Designed for heavier applications.
Load Cap.: 2,660 lb
Style: Heavy‑Duty Pad
Bar Width: 19/32 in
Bar Thickness: 1 3/16 in
Spindle Diam: 0.78 in
Body Material: Steel
Body Finish: Satin
Handle Type: Sliding Pin T‑Handle
Handle Material: Tempered Steel

SKU	Opening Size	Throat Depth
013-GSM30	12 in	5 1/2 in

ClassiX™ Standard Pad Clamps

Features:
• All‑steel bar clamp with standard swivel pad.
• Heat‑treated, high carbon ACME threaded spindle provides durability and high load capacity.
Load Cap.: 1,200 lb
Style: Standard Pad
Body Material: Steel
Body Finish: Satin
Handle Type: Sliding Pin T‑Handle
Handle Material: Carbon

SKU	Opening Size	Throat Depth
013-GS30K	12 in	5 1/2 in

SQ Series Bar Clamps

Features:
• Regular‑duty, all‑steel bar clamp.
• Comes with standard rail profile and standard pad.
• Heat treated, high carbon Acme threaded screw – tempered and quenched to give greater loading capacity and longer service life.
• The high‑strength sliding pin T‑Handle is sized according to the clamp’s capability.
Body Material: Drop‑forged Steel
Body Finish: Satin
Handle Type: Sliding Pin T‑Handle
Handle Material: Tempered Steel

SKU	Opening Size	Throat Depth	Load Cap.	Bar Width	Bar Thickness	Spindle Diam
Heavy-Duty Pad
013-SQ-12	12 in	5 1/2 in	2,660 lb	1-3/16 in	19/32 in	0.78 in
013-SQ-8	8 in	5 1/2 in	2,660 lb	1-3/16 in	19/32 in	0.78 in
Standard Pad
013-SQ-4	6 in	4 3/4 in	1330 lb	55/64 in	13/32 in	5/8 in

Regular Duty F-Clamps

Features:
• Black oxide spindle resists wear and tear while impeding rust.
• Drop forged arm provides minimal flex under heavy work loads.
• Swivel pad centers on work piece for a sturdy hold.
• Sturdy tommy bar is engineered for durability and comfort.
Bar Thickness: 15/32 in
Spindle Diam: 3/4 in
Body Material: Forged Steel; Extruded Steel
Body Finish: Zinc Plated
Handle Type: Sliding Pin; Tommy Bar
Handle Material: Steel

SKU	Opening Size	Throat Depth	Load Cap.	Bar Width
825-86200	8 in	4 3/4 in	1,800 lb	1 in
825-86210	12 in	5 1/2 in	1,800 lb	1 in
825-86220	18 in	4 3/4 in	1,800 lb	1 in

Magnetic Ground Clamps

Features:
• On/Off magnetic clamp enables welder to quickly set up, weld and move on to the next job.
• Instant ground on flat or pipe.
• Provides strong grip on flat or round surfaces.

SKU	Load Cap.	Height	Length	Width
474-8100747	200 lb	2 3/5 in	2 7/10 in	4 in
474-8100746	90 lb	2 3/10 in	2 9/10 in	1 9/10 in

Manual Hand Lifters

Features:
• Manual on/off combination magnetic hand lifter/sheet dragger for all your small steel handling needs.
• Super strong magnet up to 400 lb of grip.
• Simple 180‑degree turn of a knob to turn the magnet on or off.
• Pipe groove to conveniently transport various pipe sizes.
• Safely pick up hot, sharp or dirty steel without touching it.
• Ideal for fast and efficient steel transport.

SKU	Load Cap.	Temp. Range	Height	Length	Width
474-8100810	390 lb	80 °C	5 in	4.9 in	4.9 in

Clamp Fixtures

Features:
• Coil‑spring “stop”‑‑one is included with each clamp fixture.
• Mounts on any length 3/4” black pipe with both ends threaded (pipe not furnished).
Jaw Material: Cast Iron
Body Material: Steel
Finish: Red powder coat

SKU	Jaw Width	Spindle Diam	Handle Type	Wt.
103-50	1 3/4 in	5/8 in	Crank Handle	2 1/2 lb
103-56	2 1/2 in	5/8 in	Wing-Nut	2 1/2 lb

Pipe Clamps

Features:
• Large clamping surface.
• ACME threaded screw.
• Hex head on spindle.
• High base improves clearance from the work surface.
• An economical alternative to the bar clamp.
Jaw Material: Cast Iron
Body Material: Steel
Finish: Orange Powder‑Coated
Handle Type: Lever

SKU	Jaw Width	Spindle Diam
013-PC34-2	2 in	7/16 in

Quick-Grip Pipe Clamps

Features:
• Innovative clutch system eliminates the need for threaded pipe.
• Larger feet offer more stability and clearance between handle and worktop.
• Larger, more ergonomic handle offers easier clamping with reduced hand fatigue.
• Larger clutch plates allow for easier release and increased durability and dependability.
• Built to handle 3/4” pipe ‑ not included.

SKU	Finish	Wt.
586-224134	Blue	4 3/4 lb

Hold-E Pipe Clamps

Features:
• Rugged steel frame for years of use.
• Quick release button allows clamp arms to open and close in seconds.
• Acme threads permit positive gripping of pipe to vee head.
Body Material: Steel
Finish: Galvanized/Powder Coating
Wt.: 8.70 lbs

SKU	Jaw Width	Jaw Material
432-785000	7 in	Steel

MorPad Swivel

Features:
• Bessey clamp service part.
• For 12/18/24/4800/SGL/SQ/STB/GSL/GSM Series.
• MorPad tilts to 35°.
• Patented construction extends clamp life at full capacity.
Spindle Diam: Fits up to 0.925 in diameter spindle (48000 series)
Body Material: Steel

SKU	Load Cap.
013-3100736	- 1700 ‑ 4880 lb (depending on clamp used)

Ultra Clamps

Features:
• All new rugged frame, built for job site use.
• Smooth new roller clamping action for positive gripping.
• Stainless steel contacts & alignment screws.
• Operating handle repositions for close work.
• Fine adjustment screws for quick fit‑up.
Body Material: Stainless Steel

SKU	Opening Size	Wt.
432-781130	1 in - 2 1/2 in	3.3 lb
432-781150	2 in - 6 in	10 lb
432-781170	5 in - 12 in	17 lb

Metal Spring Clamps

Features:
• Metal spring clamps with soft‑grip pads.
Locking Type: Spring

SKU	Body Material	Quantity
586-222702	Metal	5 per pack

Vises

Swivel Vise

Features:
• Constructed of 75,000 psi tensile strength forged steel.
• Large capacity pipe jaws.
• Large, hardened anvil.
• Patented parallel jaw alignment system.
• Precise clamping action.
• Rolled double lead acme screw.
• Steel handle with rubber anti‑pinch rings.
• Surface hardened slides for smooth, precise operation.
Jaw Opening: 6 in
Throat Depth: 4.75 in
Jaw Material: Forged Steel
Material: Forged Steel
Finish: Powder Coat

SKU	Base Type	Jaw Width
632-66997	Swivel	6 in

ATV All-Terrain Vise™

Features:
• Fits a standard 2” hitch and includes a hitch pin for security.
• Can be mounted on a bench or trailer for even greater versatility.
• Lightweight and with an integrated carrying handle, the ATV is designed for easy transport.
• Patented 360° locking handle secures the handle while driving or repositions it while working.
• The included set screws are designed to provide a tight fit in the hitch and reduce vibration while driving.
• Large striking anvil for forming and shaping materials.
• Ideal working height doesn’t interfere with truck bed or tailgate.
• Jaws are replaceable and include a v‑groove for vertical clamping of round objects.
• 60,000 PSI ductile iron body.
Jaw Opening: 5 3/4 in
Throat Depth: 5 in
Pipe Jaw Cap.: 3/4 in ‑ 3 in
Jaw Material: Iron
Material: Iron
Finish: Painted

SKU	Base Type	Jaw Width
825-10010	Stationary	6 in

Mechanics Vises

Features:
• Swivel base rotates 360 degrees and has double lockdowns ensuring maximum stability.
• Powder coat paint resists scratches and provides a tough durable finish.
• Replaceable hardened steel top and pipe jaws.
• Large anvil work surface.
Jaw Material: Steel
Material: Cast Iron
Finish: Powder Coated Paint

SKU	Base Type	Jaw Width	Jaw Opening	Throat Depth	Pipe Jaw Cap.
825-21300	Swivel	4 in	4 1/2 in	3 7/16 in	1/4 in - 2 in
825-21400	Swivel	5 in	5 1/4 in	3 3/4 in	1/4 in - 2 1/2 in
825-21500	Swivel	6 in	5 3/4 in	4 1/8 in	1/4 in - 3 1/2 in
825-21800	Swivel	8 in	8 1/4 in	4 3/4 in	1/4 in - 3 1/2 in

Shop Vises

Features:
• Heavy-duty 30,000 PSI casting for strength and durability.
• Replaceable top jaws and built‑in pipe jaws.
• 360° swivel base with double lockdown for quick and easy positioning.
• Designed for general duty applications.
• Built‑in pipe jaws handle various pipe sizes.
• Rubber pinch point safety guards.
• Large anvil work surface.
Jaw Material: Hardened Steel
Material: Cast Iron
Finish: Matte Gray

SKU	Base Type	Jaw Width	Jaw Opening	Throat Depth	Pipe Jaw Cap.
825-63302	Swivel	6 in	6 in	3 1/2 in	5/8 in - 2 1/2 in
825-63304	Swivel	8 in	8 in	4 in	3/4 in - 3 in

Tradesman Vises

Features:
• Large anvil surface.
• 60,000 PSI tensile ductile iron body parts.
• 360° swivel base with double lockdowns.
• Wider jaws provide greater clamping surface.
• Fully enclosed spindle increases the life of the vise.
Jaw Material: Steel
Material: Cast Iron
Finish: Powder Coated

SKU	Base Type	Jaw Width	Jaw Opening	Throat Depth	Pipe Jaw Cap.
825-28805	360° Swivel	4-1/2 in	3-1/2 in	3-1/2 in	1/4 in - 3-1/2 in
825-28806	360° Swivel	5-1/2 in	5 in	3-5/8 in	3/8 in - 3-1/2 in
825-28808	360° Swivel	8 in	6-3/4 in	5 in	3/8 in - 4-1/2 in
825-28807	Swivel	6-1/2 in	6 in	4-1/4 in	3/8 in - 4 in

450 Tristand Chain Vise Jaws

Features:
• Helps keep piping tightly in place without the need to clamp down and the risk of compression.
• Replaces old or worn parts to keep chain vise working like new.
• Installs easily to reduce downtime.

SKU	Type	Material
632-41020	Jaw	Hardened Steel

Bench Chain Vise Replacement Parts

SKU	Type	Wt.
632-41055	Chain Assembly	1.80 lb
632-41155	Chain Assembly	5 lb
632-41125	Handle w/Nut	1.47 lb
632-41085	Vise Jaw	1.79 lb

Top Screw Bench Chain Vises

Features:
• Rugged cast‑iron base has handy pipe rest and bender.
• Crank handle is anchored to base.

SKU	Pipe Cap.	Material
632-40215	1/2 in - 8 in	Cast Iron
632-40210	1/4 in - 6 in	Cast Iron
632-40185	1/8 in - 2-1/2 in	Cast Iron
632-40195	1/8 in - 4 in	Cast Iron

Tri-Stand Chain Vises

Features:
• Optimized base for more working area.
• Benders are located at the rear of the base and three tool hangers are provided.
• Integrated ground lug provides a conductive surface to connect the weld ground.
• Leg chain retains legs even when subjected to rugged use during operation and transport.
• Rugged tool tray offers prolonged stability before requiring a leg adjustment.

SKU	Pipe Cap.	Material
632-36278	1/8 in - 12 in	Ductile Iron Work Surface; Tubular Legs
632-16703	1/8 in - 2 1/2 in	Metal
632-36273	1/8 in - 6 in	Ductile Iron Work Surface; Tubular Legs

Straight Pipe Welding Vises

Features:
• Resists strain, heat, and warpage during tacking.
• Machined swivel nuts, pins, and special chain screws for trouble free assembling of the vise onto the pipe.
Wt.: 16 lb

SKU	Pipe Cap.	Material
632-40220	1/2 in - 8 in	Cast Iron

Bench Yoke Vises

Features:
• Yoke and base made of strong, dependable iron.
• Hardened alloy steel jaws and convenient pipe rest and bender.
Material: Cast Iron
Wt.: 27 3/4 lb

SKU	Pipe Cap.	Jaw Material
632-40100	1/8 in - 4 in	Alloy Steel

CONCRETE & MASONRY TOOLS

Masonry Brushes

Features:
• For applying cement, waterpaints and liquid waterproofing materials on cement block and other masonry walls.
• Handle attached.
Block Material: Hardwood

SKU	Trim Length	Bristle Material	Bristle Rows
804-44031	3 1/2 in	White Tampico	4 Rows

CRIMPING & STRIPPING TOOLS

Crimpers & Strippers

Heavy Duty Lug Crimping Tools

Features:
• Heavy‑duty steel body with double slide support for rigidity.
• Durable spring‑loaded mechanism holds terminal/lug in place.
• Easy‑to‑read scale on both sides of drive punch.
• Wide base for stability.
Handle Material: Steel
Handle Color: Black

SKU	Capacities	Cable/Wire Size	Wt.
900-CM-20	6-4/0 AWG	6 AWG - 4/0 AWG	2.01 lb

Crimpers

Features:
• Designed for crimping of both insulated and non‑insulated solderless connections and terminals.
• Slim nose shape for tight places.
• Perfectly mated cutters, scientifically heat treated to hold their edge.
Wt.: 15 oz

SKU	Cable/Wire Size
140-909-BULK	10 AWG - 22 AWG

Wire Strippers

Features:
• CHANNELLOCK BLUE® grips for comfort.
• Crimps insulated and noninsulated terminals.
• Lean plier nose pulls and loops wire.
Handle Color: Blue
Wt.: 0.57 lb

SKU	Cable/Wire Size	Length
140-908	10 AWG - 22 AWG	8 1/4 in

T®-Strippers

Features:
• Built‑in wire cutter and looping holes.
• Convenient plier nose for extra gripping strength.
• Laser‑etched wire gauge for easy‑to‑read visibility.
• Spring‑loaded automatic opening.
Handle Material: Plastic Coated Steel

SKU	Cable/Wire Size	Wt.
131-45-120	10 AWG - 18 AWG; 12-20 AWG Stranded	—
131-45-121	Strips 14-24 AWG Solid, 16-26 AWG Stranded	—
131-45-123	32 AWG - 10 AWG SOlid; Up to 1/2 in O.D. Fine Stranded	4.2672 oz

Wire Strippers

Features:
• Designed to handle general purpose, non‑precision wire stripping.
• Gripper keeps wire securely in place.
• One‑step action reduces time for increased productivity.
• Spring‑action mechanical advantage increases leverage while reducing operator fatigue.
Strips Solid Wire: 22 AWG
Length: 7 in
Handle Material: Plastic
Handle Color: Blue

SKU	Capacities	Cable/Wire Size
131-45-092	1/11 in; 1/14 in; 1/21 in; 18/125 in; 2/33 in; 6/53 in	10 AWG - 22 AWG

Self-Adjusting Wire Strippers

Features:
• Self‑adjusting stripper strips wire from 10‑24 AWG.
• Adjustable stopper controls the length of the core strip.
• Swivel knob micro‑adjusts for gauges smaller than 20 AWG.
• Wire crimper crimps 10‑22 AWG insulated, 10‑22 AWG non‑insulated and 7‑9mm ignition terminals.
• Wire cutter extends versatility.
• ProTouch™ grips provide maximum comfort and reduced hand fatigue.
Test & Approvals: Meets or Exceeds ANSI Specifications

SKU	Cable/Wire Size	Length
586-2078300	10 AWG - 24 AWG	8 in

Crimping Tools

Features:
• Wire cutter in nose.
• Tapered nose for working in confined spaces.
Length: 9 3/4 in

SKU	Cable/Wire Size	Handle Material	Handle Color
409-1005	10 AWG - 22 AWG	Steel Core; Plastic Dipped	Red
409-1006	10 AWG - 22 AWG	Plastics	Black

Journeyman™ Crimping/Cutting Tools

Features:
• Soft handle material on outer surface for comfort and a firm grip and hard black material on inner surface and handle ends for toughness and durability.
• Wire cutter in nose.
• Designed to crimp insulated and non‑insulated 10 to 22 AWG solderless terminals and connectors.
• Tapered nose design for working in confined spaces.
Wt.: 13.4 oz

SKU	Capacities	Cable/Wire Size
409-J1005 10-22	AWG Cutting/Crimping Insulated and Non-Insulated Terminals	10 AWG - 22 AWG

Katapult® Wire Stripper/Cutters

Features:
• Removes up to 1‑Inch (25 mm) in length of the insulation layer (jacket layer) in a single step.
• Compound action stripping: grip and strip via single‑action squeezing motion.
• Precision machined stripping holes easily remove jacket insulation without damaging the wire.
Strips Solid Wire: 8 AWG ‑ 20 AWG
Handle Material: Rubber
Wt.: 12.1 oz

SKU	Capacities	Cable/Wire Size
409-11063W	22 AWG	8 AWG - 22 AWG

Kurve® Wire Strippers/Cutters

Strips Solid Wire: 10 AWG ‑ 18 AWG
Handle Material: Steel Core; Plastic Dipped

SKU	Capacities	Length
409-11055	10-18 AWG Solid; 12-20 AWG Stranded Wire	-7 1/8 in

Long-Nose All-Purpose Tools

Features:
• Crimps insulated and non‑insulated terminals and 7 to 8 mm ignition terminals.
• Narrow, serrated plier nose to pull, loop and bend wire.
• Cleanly shears 4‑40, 5‑40, 6‑32, 10‑32 and 10‑24 screws.
• Overall length 8.25 in.
• Strips and Cuts: 10‑20 AWG Solid; 12‑22 AWG Stranded.
Length: 8 1/4 in
Handle Material: Steel Core; Plastic Dipped

SKU	Capacities	Cable/Wire Size
409-1010	10-22 AWG	10 AWG - 22 AWG

Multi-Purpose Electrician’s Tools

Features:
• Two wire cutters—one at tip, the other halfway back near stripping holes—double the utility of this tool.
• Crimps 7‑8 mm insulated and non‑insulated terminals, lugs and splices.
• Cuts and strips 8‑22 AWG solid and 10‑26 AWG stranded wire.
• Cleanly shears bolts.
• Pivot nut adjusts tension.
• Left‑ and right‑hand wire‑looping holes near tip.
• Full‑sized, plastic‑covered cushioned handles for comfort.
• Wire cutter in nose and below pivot.
• Crimping dies color‑coded for easy identification.
Strips Solid Wire: Strips and Cuts 8 AWG ‑ Strips and Cuts 22 AWG

SKU	Capacities	Cable/Wire Size
409-1001	10-22 AWG Crimping; Solid 8-22 AWG and Stranded 10-26 AWG Cutting	8 AWG - 22 AWG

Wire Stripper-Cutter

Features:
• Holes for looping wire ends.
• Coil‑spring opening action reduces fatigue.
• Strips six standard wire sizes without nicking wire.
• Scissors action of 1/2 in (13mm) wide cutter makes clean cuts with little effort.
• Serrated nose jaws to bend shape or pull wire holes for looping wire ends.
• Spring‑loaded for self‑opening action.
• Comfortable plastic‑covered handles.
Strips Solid Wire: 10 AWG ‑ 20 AWG
Length: 6 1/2 in
Handle Material: Plastic Coated
Handle Color: Blue

SKU	Capacities	Cable/Wire Size
409-1011	10 AWG; 22 AWG	10 AWG - 22 AWG

Wire Strippers

Features:
• Cuts, strips, loops and gauges 10‑18 AWG solid wire.
• Spring‑loaded action for self opening.
• Flat design for easy store and carry.
• Narrow nose fits into tight places.
• Wide handles with cushion ridges.
• Precision‑ground stripping holes for easy removal of insulation.
• Easy‑to‑read wire gauge markings on both sides for stripping in either direction.
Length: 6 1/4 in
Handle Material: Steel Core; Plastic Dipped

SKU	Capacities	Strips Solid Wire	Handle Color
409-11045	10-18 AWG Solid	10 AWG - 18 AWG	Yellow
409-11046	16-26 AWG Stranded	16 AWG - 26 AWG	Red

Single Action Pincers

Features:
• Straight jaw single action pincer.
• Designed for installing and removing ear clamps.
• Forged steel tool with insulated handle.
Handle Material: Plastic
Handle Color: Blue

SKU	Capacities	Length
320-14100396	5, 7, 9 mm Clamps	-8.85 in

Hand-Held Ferrule Crimp Tools

Features:
• Crimp with hammer strike or vise pressure.
• Performs precision crimping tasks quickly and easily.
• Convenient multi‑hole design.
Handle Material: Steel
Handle Color: Black

SKU	Capacities	Length	Wt.
312-C-5	3/16 in; 1/4 in	-1/2 in	1.32 lb

Hand-Held Ferrule Crimp Tools with Hammer Strike

SKU	Capacities	Length	Wt.
312-C-3	5/16 in; 1/4 in; 3/8 in	1 in	0.94 lb
312-C-1	3/16 in; 1/4 in	5/8 in	1.27 lb

Heavy-Duty Ferrule Crimp Machines

Features:
• Low cost, portable and easy to use.
• Rugged construction.
Handle Color: Silver

SKU	Capacities	Length	Wt.
312-CR-100	3/16 in; 1/4 in; 5/16 in; 3/8 in	1/2 in	3 lb.

XTRACTORS & SETS

Extractor Sets

Screw Extractor and Drill Bit Sets

Features:
• Extractor sizes and recommended drill bit sizes etched on each tool.
• Left-hand Cobalt Drill Bits.
• Multi Spline Extractors.
• Sprial Flute Extractors.
Quantity: 35 per set
Wt.: 3.4 lb

SKU	Extractor Screw Diam.	Includes
585-11135ZR	EX-1-EX -6; 1/8 in - 1/2 in	Spiral EX1-EX6; Multi-Spline 1/8 in - 1/2 in; LH Cobalt Drill Bits 5/64 in - 1/2 in

Extractor Sets

Features:
• Strong, heat‑treated tool steel.
• Corresponding drill‑bit size stamped on each tool.
• Corrosion‑resistant finish.

SKU	Extractor Screw Diam.	Includes	Quantity
577-9500B	1/8 in; 3/16 in; 7/32 in; 5/16 in; 3/8 in; 7/16 in; 17/32 in; 5/8 in; 3/4 in; 1 in	Blow Molded Box	10 per set
577-9500A	1/8 in; 3/16 in; 7/32 in; 5/16 in; 3/8 in	Pouch	5 per set

Pipe Extractor Sets

Features:
• Make easy work of removing broken threaded ends of pipe, pipe plugs and fittings.
• Securely grips and turns pipe from the inside.
• Each is plainly marked showing drill size used when solid ends of plugs and fittings must be drilled to receive extractor.
Quantity: 6 per set
Wt.: 1.75 lb

SKU	Extractor Screw Diam.	Includes
632-35685	1/8 in; 1/2 in	Nos. 80 to 85 Extractors

Screw Extractor Sets

Features:
• Extractor spiral flutes are designed to embed themselves deeper into metal as you turn the tool.
• Alloy steel material.
• Pre‑formed plastic box provides convenient storage.

SKU	Extractor Screw Diam.	Includes
632-35585	1 in; 1/8 in; 2 in; 3/16 in; 3 in; 1/4 in; 4 in; 5/16 in; 5 in; 11/16 in	Drill Bits No. 1 - 5; Drill Guides Nos. 921 to 1821; No. 1, 2, 3, 4, 5 Extractors; Plastic Box

Extractors

10-pc Spiral Extractor and Drill Bit Combo Packs

Features:
• Designed to remove broken studs, bolts, socket screws and fittings.
• Aggressive left-hand spiral design for extra gripping power.
• Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the extractor’s grip increases.
• Extractor size and recommended drill bit size are etched on each tool.

SKU	Extractor Screw Diam.	Includes
585-11119	5/64 in; 7/64 in; 5/32 in; 1/4 in; 19/64 in	Spiral Flute Screw Extractors in sizes: EX-1; EX-2; EX-3; EX-4; EX-5 and Drill Bits in sizes: 5/64 in; 7/64 in; 5/32 in; 1/4 in; 19/64 in

Hex Head Multi-Spline Screw Extractors - 532 Series - Plastic Case Sets

Features:
• Designed to remove broken studs, bolts, socket screws and fittings for high torque applications.
• Aggressive left-hand spiral design for extra gripping power.
• ETCHED SIZES: Extractor size and recommended drill bit size are etched on each tool.
• 25‑PIECE SET: Hex head multi‑spline extractors from 1/8”‑7/8” in heavy-duty carrying case.
Quantity: 25 per set

SKU	Extractor Screw Diam.	Includes
585-53227	1/8 in - 7/8 in	1/8 in through 7/8 in

Spiral Flute Screw Extractors - 535/524 Series Sets

SKU	Includes	Wt.
585-53535	EX-1 - EX-5	0.28 lb
585-53545	EX-1 - EX-6	0.53 lb

Straight Flute Screw Extractors - 536/526 Series - Sets

Features:
• Designed for softer materials or thin‑walled pieces such as pipes and fittings.
• Design eases extraction because it does not expand the material as you remove it.
• Removes both left‑hand and right‑hand threaded parts.
• Extractor size and recommended drill bit size are etched on each tool.

SKU	Includes	Wt.
585-53645	ST‑1 ‑ ST‑6	0.62 lb

Screw Extractors

Features:
• Drive into end of broken pipe or fitting.
• Use tap holder or wrench on extractor to turn out broken part.
• Size stamped on extractor refers to drill bit size to be used with that extractor.

SKU	Wt.
577-9526	0.28 lb
577-9527	0.46 lb
577-9528	0.72 lb
577-9529	1.29 lb

Files

Farrier Rasps

American Pattern Rectangular Plain 1/2 Horse Rasp Files

Features:
• This thin fine‑toothed rasp for shoeing racetrack riding horses and ponies.
• Plain horse rasps are double‑ended with rasp teeth on 1 side.
• File teeth on opposite side.
Tooth Pattern: Flat ‑ Rasp Cut; Flat ‑ Single Cut
Cross Section Shape: Rectangular
Style: American Pattern
Applicable Materials: Most Metals
Quantity: 6 per box

SKU	Cut Type	Length
183-17903N	Bastard Cut	14 in

Rectangular Tanged Horse Rasp Files

Features:
• Single‑cut on edges.
• Rasp teeth on 1 side, file teeth on opposite.
• Thicker than Plater’s Special.
Tooth Pattern: Flat ‑ Rasp Cut; Edge ‑ Single Cut
Cross Section Shape: Rectangular
Style: American Pattern
Applicable Materials: Most Metals
Quantity: 6 per box

SKU	Cut Type	Length
183-18057N	Bastard Cut	14 in; 17.850 in

File Accessories

File Cleaners

Features:
• The file card and brush is perfect for general cleaning of file teeth, removing fillings, dirt, rust, burrs, corrosion, and most buildups of foreign material on metal.
• The file card and brush unclog teeth on finer cut files, allowing the abrasive to cut properly each time.
• Its wood base construction offers durability and ease of grip, so you can work confidently over time.
Quantity: 10 per box

SKU	Bristle Material	Handle Material	Overall Length
183-21458	Steel	Wood	10 in

File Sets

5 Pc. Ergonomic File Sets

Features:
• Files feature rubber‑coated ergonomic handles for better comfort and control.
• For home and professional use.
• Comes with rugged and compact pouch for easy and secure storage.

SKU	Includes
183-22040HNN	10 in Half-Round Bastard File; 10 in Mill Bastard File; 8 in Mill Bastard File; 8 in Flat Bastard File; 6 in Slim Taper File

8-Pc Machinist File Sets

Features:
• Ideal for home and professional use.
• Offers a variety of shapes and coarseness grades for a range of shop uses.

SKU	Includes	Quantity
183-22025NN	10 in File Cleaner (card); 10 in Flat Bastard file; 10 in Flat Smooth File; 10 in Half-Round Bastard File; 10 in Mill Bastard file; 10 in Round Bastard File; 10 in Square Bastard File; 7 in Slim Taper File	8 per pouch

9-Piece Maintenance File Sets

Features:
• For home and professional use.
• Fits easily and securely into rugged, compact pouch.

SKU	Includes
183-22030NN	10 in Flat Bastard File; 10 in Flat Smooth File; 10 in Mill Bastard File; 10 in Half-Round Bastard File; 10 in Round Bastard File; 8 in Flat Smooth File; 8 in Half-Round Bastard File; 8 in Four-in-Hand File; 6 in Slim Taper File; Pouch

Assorted Hobby File Sets

Features:
• Selection of 6 miniature files with fine cut for intricate work.
• Ideal for handicrafts and hobbies.

SKU	Includes	Quantity
183-42030L	Equaling File; Half Round File; Flat File; Round File; Three Square File; Vinyl Case	6 per set

Ergonomic File Sets

Features:
• Rubber coated ergonomic handles for better comfort and control.
• Nylon roll up pouch.

SKU	Includes	Quantity
183-22030HNN	6 in Slim Taper File; 6 in Slim Taper File; 8 in Half Round Bastard File; 8 in Flat Bastard File, 10 in Round Bastard File, 10 in; 10 in Half Round Bastard File; 10 in Mill Bastard File; 10 in Flat Bastard File; 12 in Mill Bastard File	9 per pouch

General Purpose File Kits

Features:
• Rubber‑coated ergonomic handles for better comfort and control.
• For home and professional use.
• Comes with rugged and compact pouch for easy and secure storage.

SKU	Includes	Quantity
183-22040NN	10 in Half-Round Bastard File; 10 in Mill Bastard File; 8 in Mill Bastard File; 8 in Mill Smooth File; 6 in Slim Taper File; Plastic Pouch	5 per pouch

Thread Restoring File Sets

Features:
• Each thread restoring file will work with 8 different thread sizes.
• Caps are color coded.
• Restores damaged or worn external threads on bolts, pipes, and more.
• Works with 8 different thread sizes.

SKU	Includes	Quantity
183-33024	Type 1 Regular Bolt; Type 2 Extra Fine/Extra Coarse Bolt; Type 7 Regular Pipe; Type 8 Metric Bolt	4 per pouch

Flat Files

Flat Magicut® Files

Features:
• All‑purpose file is ideal for machinists and removes stock rapidly.
• Rectangular shape allows you to smooth and sharpen straight surfaces.
• Narrow chip breaker pattern created by steep, angled serrations helps quickly remove material and provides a smoother finish.
• Slight taper in width towards the file’s point creates ease of access in slots.
Cross Section Shape: Rectangular
Style: American Pattern
Applicable Materials: Most Metals
Quantity: 6 per box

SKU	Cut Type	Length	Tooth Pattern
183-07941N	Smooth Cut	12 in; 1 in	Flat ‑ Single/Chip Breaker Cut

Rectangular Machinists Boxed Flat Files

Features:
• Used by machinists, machinery builders, ship and engine builders, repairmen, and others who require rapid removal of metal.
• Rectangular in cross section and taper slightly towards point in width.
• Double‑cut on sides, single‑cut on edges.
Tooth Pattern: Flat ‑ Double Cut; Edges ‑ Safe
Cross Section Shape: Rectangular
Style: American Pattern
Applicable Materials: Most Metals

SKU	Cut Type	Length	Quantity
183-03467N	Bastard Cut	—	12 per box
183-03566N	Bastard Cut	8 in	12 per box
183-03665N	Bastard Cut	1 in; 10 in; 8 in	6 per box
183-03764N	Bastard Cut	12 in	6 per box
183-03863N	Bastard Cut	14 in	6 per box
183-03797N	Second Cut	—	6 per box
183-03533N	Smooth Cut	6 in; 1 in	12 per box
183-03632N	Smooth Cut	8 in	12 per box
183-03731N	Smooth Cut	10 in	6 per box
183-03830N	Smooth Cut	12 in; 1 in	6 per box

Half Round Files

Bastard File

Features:
• Manufactured from the finest materials and properly heat treated to produce outstanding quality.
• Versatile applications for concave, convex or flush surfaces.
• Double‑cut flat side.
• Handy for filing down sharp edges.
Tooth Pattern: Flat ‑ Double Cut
Style: American
Applicable Materials: Wood; Most Metals
Quantity: 50 per case

SKU	Cut Type	Length
100-14HRBF	Bastard Cut	14 in

Double Cut Second Files

Features:
• American pattern half round file, bastard cut.
• Used on concave, convex and flat surfaces.
• Rounded on one side, flat on opposite.
Tooth Pattern: Curved ‑ Double Cut
Tool Shape: Half Round
Style: American Pattern
Applicable Materials: Most Metals

SKU	Cut Type	Length
183-04828N	Second Cut	6 in

Half-Round Files

Features:
• Used on concave, convex and flat surfaces.
• Rounded on one side, flat on opposite.
• Backs of all half‑round bastard files are double‑cut.
• Backs of all 4 in and 6 in files are single‑cut.
• Backs of all half‑round second‑cut files are longer than 6 in are double‑cut.
Tooth Pattern: Curved - Double Cut; Flat - Double Cut

SKU	Length	Tool Shape	Style	Applicable Materials	Quantity
Bastard Cut
183-04795N	6 in	Straight	American Pattern	Most Metals	12 per box
183-04896N	8 in	Straight	American Pattern	Most Metals	12 per box
183-04995N	10 in	Straight	American Pattern	Most Metals	6 per box
183-05094N	12 in	Straight	American Pattern	Most Metals	6 per box
183-05307N	16 in	Straight	American Pattern	Most Metals	6 per box
Double-Cut Bastard
183-05190N	14 in	Straight	Pipeliner File; American Pattern	Iron; Mild Steel; Plastics; Wood	6 per box
183-05194N	14 in	Straight	American Pattern	Iron; Mild Steel; Plastics; Wood	6 per box
Second Cut
183-04927N	8 in	Straight	American Pattern	Most Metals	—
183-05125N	12 in	Straight	American Pattern	Most Metals	6 per box
Smooth Cut
183-04861N	6 in	Half- Round	American Pattern	Most Metals	12 per box
183-04960N	8 in	Straight	American Pattern	Most Metals	12 per box
183-05059N	10 in	Straight	American Pattern	Most Metals	6 per box
183-05158N	12 in	Straight	American Pattern	Most Metals	6 per box

Machinists Carded Half Round Files

Features:
• Used on concave, convex and flat surfaces.
• Rounded on one side, flat on opposite.
• Backs of all half‑round bastard files are double‑cut.
• Backs of all 4 and 6” files are single‑cut.
• Backs of all half‑round second‑cut files are longer than 6” are double‑cut.
Tooth Pattern: Curved ‑ Double Cut; Flat ‑ Double Cut
Tool Shape: Straight
Style: American Pattern
Applicable Materials: Most Metals
Quantity: 6 per card

SKU	Cut Type	Length	Wt.
183-21858N	Bastard Cut	10 in	0.56 lb
183-05090N	Bastard Cut	12 in	0.9 lb

Half Round Files

Features:
• Designed for filing pipeline welds and root passes, and for scale removal from pipeline.
• Ideal for rapid metal removal in rough filing applications.
Applicable Materials: Pipeline
Quantity: 1 each

SKU	Cut Type	Length	Wt.
Handle Included
419-11155	Bastard Cut	14 in	1 1/4 lb

Knife Files

Triangular Machinists Boxed Knife Files

Features:
• Knife files are supplied with safe backs.
• Primarily used by tool and die makers with work having acute angles.
Style: American Pattern
Tooth Pattern: Flat ‑ Double Cut; Edge ‑ Single Cut
Cross Section Shape: Triangular
Tool Shape: Taper to Point
Applicable Materials: Most Metals
Quantity: 12 per box

SKU	Cut Type	Length	Width	Height
183-06898N	Bastard Cut	8 in; 1 in	3/4 in	0.200 in
183-06867N	Smooth Cut	6 in; 1 in	1/4 in	0.010 in

Lathe Files

Lathe Long-Angle Bastard-Cut Files

Features:
• Rapid, free‑cutting files designed for lathe filing on wood or soft metals.
• Rectangular shape is reliably strong and has a wide surface for faster filing.
• Single‑cut pattern is perfect for smoothing edges or precision work.
• Safe edges designed to protect lathe and file when working close to the edges of a work piece.
• Made on flat file blanks with a bastard‑cut style that is coarser to the touch.
• Cut faster than regular mill files and leave a smoother finish.
Tooth Pattern: American
Cut Type: Bastard/Single
Applicable Materials: Most Metals

SKU	Style	Cross Section Shape	Length	Quantity
183-07688N	Machine	Rectangular	12 in	6 per box

Mill Files

Rectangular Machinists Boxed Mill Files

Features:
• Used for sharpening mill or circular saws.
• Also for draw‑filing and finishing metals.
• 2 square edges.
• All sizes taper slightly in width.
Style: American Pattern
Tooth Pattern: Flat ‑ Single Cut; Edge ‑ Single Cut
Cross Section Shape: Rectangular
Tool Shape: Taper to Point in Width
Applicable Materials: Most Metals

SKU	Cut Type	Length	Quantity
183-08243NN	Bastard Cut	4 in	12 per box
183-08354N	Bastard Cut	6 in	12 per box
183-08497N	Bastard Cut	8 in	12 per box
183-08642N	Bastard Cut	10 in	12 per box
183-08737N	Bastard Cut	12 in	6 per box
183-08832N	Bastard Cut	14 in	6 per box
183-08416N	Smooth Cut	6 in; 1 in	12 per box
183-08560N	Smooth Cut	8 in; 1 in	12 per box
183-08704N	Smooth Cut	10 in	12 per box
183-08799N	Smooth Cut	12 in; 1 in	6 per box

Round Files

Machinists Boxed Round Files

Features:
• Single‑cut, tapered round file provides the right touch for smoothing rough edges.
• Best suited for recessed surfaces or circular openings.
• Versatile tool for metalworking or woodworking environments.
Cross Section Shape: Round
Tool Shape: Taper to Point
Applicable Materials: Most Metals

SKU	Style	Cut Type	Tooth Pattern	Quantity	Wt.
Curved - Double Cut
183-12248	American Pattern	Bastard Cut	Curved - Double Cut	6 per box	1 lb
Curved - Single Cut
183-12134	American Pattern	Bastard Cut	Curved - Single Cut	6 per box	0.57 lb
183-12019	American Pattern	Bastard Cut	Curved - Single Cut	12 per box	0.27 lb
183-11904	American Pattern	Bastard Cut	Curved - Single Cut	12 per box	0.12 lb

Round Bastard-Cut Files

Features:
• Can be used to file circular openings or concave surfaces.
• Single‑cut construction provides light removal of material and slightly smoother edges.
• Slight taper in width towards the file’s point creates ease of access in slots.
• Round file can work in areas that a rectangular file cannot.
• Safe point on round files helps reduce the risk of injury.
Tooth Pattern: American
Tool Shape: Round

SKU	Cut Type
American
183-11716	Bastard

Surform Files

Surform® Shaver Tools

Features:
• Compact and effective lightweight polypropylene molded body.
• Curved blade for increased stock removal.
• The blade also has side cut teeth for shaving in corners.
• Works on the pull stroke.
Overall Length: 7 1/4 in
Body Material: Polypropylene
Applicable Material: Wood; Plastic; Masonry Materials
Type: Surform® Shaver
Quantity: 6 per box

SKU	Blade Length	Blade Width
680-21-115	2 1/2 in	1 5/8 in

Surform® Tool Blades

Features:
• Convenient blade speeds up stock removal.
• When working a surface, blade scrapes on the pull stroke.
Body Material: Steel
Applicable Material: Fiberglass; Linoleum; Plaster; Thermalite; Vinyl; Wood
Type: Shaver Blade

SKU	Blade Length	Blade Width
680-21-515	2 1/2 in	1 5/8 in

Taper Files

Triangular Boxed Slim Taper Saw Files

Features:
• Edges set and cut for filing gullets between saw teeth.
• Tapers slightly towards the point.
Quantity: 12 per box
Cut Type: Smooth Cut

SKU	Cross Section Shape	Height	Length
183-14224M	Triangular	1.559 in	6 in
183-14290M	Triangular	1.25 in	8 in

HAMMERS, SLEDGES, MALLETS & AXES

Hammers

Ball Pein Hammers

Features:
• Steel ball pein hammers with Shock Reduction Grip®.
• Finest‑grade tool steel.
• Double‑tempered strike‑stress points.
• Fully polished head and neck
Head Material: Steel

SKU	Head Weight	Overall Length
268-E3-12BP	12 oz	10.75 in
268-E3-16BP	16 oz	13 in
268-E3-24BP	24 oz	13 1/2 in
268-E3-32BP	32 oz	14-1/2 in

Classic Ball Pein Hammers

Features:
• Drop forged, heat treated carbon steel head.
• Super strong Classic Nuplaglas® handle.
• Compatible in all weather environments.
Handle Material: Fiberglass
Grip Style: H
Head Material: Carbon Steel
Color: Yellow/Black

SKU	Head Weight	Handle Length	Wt.
545-21-016	16 oz	13 in	1.08 lb
545-21-024	24 oz	14 in	1.67 lb
545-21-032	32 oz	14 in	1.86 lb

Ball Pein Hammers

Features:
• For striking chisels and punches, and for riveting, shaping, and straightening unhardened metal.
• Ground, black head.
• Permabond® construction between head and handle.
• Polished poles and peins.
Handle Material: Hickory
Handle Type: Straight
Head Material: Forged Steel
Color: Red
Finish: Polish

SKU	Head Weight	Handle Length	Overall Length	Wt.
184-T11498	16 oz	12 in	12-3/4 in	1 lb
184-11520	24 oz	14 in	15 in	1 3/4 lb
184-11521	32 oz	14 in	15 in	2 1/4 lb

Fiberglass Handle Ball Pein Hammers

Features:
• Comfortable black cushion grip.
• Permabond® construction between head and handle.
• Professional quality fiberglass handle.
• Rust‑resistant, forged black head with polished pole and peins.
Handle Material: Fiberglass
Head Material: Forged Steel
Finish: Polish

SKU	Head Weight	Overall Length	Color	Wt.
184-11426	16 oz	12-3/4 in	Red	1.52 lb
184-11428	24 oz	15 in	—	1 1/2 lb
184-11429	32 oz	15 in	—	2 1/4 lb

Ball Pein Hammers

Features:
• Polished face and pein.
• Rim‑tempered face minimizes chipping and assures greater safety.
Handle Material: Hickory
Handle Type: Straight
Grip Style: Wood Grip
Head Material: High Carbon Steel
Finish: Polished

SKU	Head Weight	Overall Length	Color	Wt.
680-54-016	16 oz	14 in	Black	1.43 lb
680-54-024	24 oz	15 in	Black	2.03 lb
680-54-032	32 oz	16 in	Brown	2.74 lb

Commercial Ball Pein Hammers

Features:
• Compression wedged handle.
• Other surfaces finished in rust resistant black paint.
Handle Material: Hickory
Handle Type: Straight
Grip Style: H
Head Material: Forged Steel
Color: Black
Finish: Polished

SKU	Head Weight	Handle Length	Overall Length	Wt.
770-TC308	8 oz	11-3/4 in	11-3/4 in	0.81 lb
770-TC2012	12 oz	12 in	12-5/8 in	1.13 lb
770-TC016	16 oz	13-3/4 in	13-7/8 in	1.44 lb
770-TC224	24 oz	15-1/4 in	15 in	2.13 lb
770-TC432	32 oz	15-3/4 in	15-1/8 in	2.56 lb

Fiberglass Handle Ball Pein Hammers

Features:
• Hollow‑core fiberglass handle provides better balance and more effective shock absorption than solid fiberglass handles.
• Slip‑resistant grip.
• Steel wedged and epoxy sealed adze eye assembly.
Handle Material: Fiberglass
Handle Type: Straight
Head Material: Forged Steel
Finish: Polished

SKU	Head Weight	Overall Length	Wt.
770-FS016	16 oz	13 in	1 1/2 lb
770-FS224	24 oz	14 1/2 in	2.13 lb
770-FS432	32 oz	14 3/4 in	2.63 lb

Bricklayer or Mason’s Hammers

Features:
• Excellently balanced.
• One‑piece forged tool steel.
• Shock Reduction Grip.
Head Material: Steel
Handle Material: Steel
Type: Brick Hammer

SKU	Head Weight	Overall Length	Handle Type	Wt.
268-E3-20BLC	20 oz	11 in	Straight; Bricklayer Grip™	1.75 lb
268-E3-24BLC	24 oz	11 in	Straight; Bricklayer Grip™; Shock Reduction Grips®	1.88 lb

Dual Tools Tomahawks®

Features:
• Dual models feature welded brush boxes and top quality replaceable wire brushes.
• Convenient bristle brush.
• Durable, high quality construction.
• Made in the USA.
Handle Material: Steel
Head Material: Steel
Head Length: 3 7/8 in
Color: Black

SKU	Overall Length	Handle Type
Chisel & Brush
378-A	11 1/2 in	Coil

Long-Nek Tomahawks®

Features:
• The Atlas “Long Nek” head design offers 50% greater handle support and protection from handle splinter caused by working over an edge.
• Select Hickory handles are hand fitted and secured in the head by our unique process which virtually eliminates handle loosening.
• Made in the USA.
Head Material: Steel
Color: Black

SKU	Overall Length	Handle Type	Handle Material	Head Length
Chisel & Cross Chisel
378-WH-10	12 in	Straight	Hickory	7 in
Cone & Chisel
378-WH-20	12 in	Straight	Wood	7 3/4 in
Cone & Cross Chisel
378-WH-30	12 in	Straight	Hickory	7 3/4 in
Curved Cone & Cross Chisel
378-WH-40	12 in	Straight	Hickory	8 1/4 in

Multi-Purpose Tomahawks

Features:
• Steel coil grip handles.
• Conforms to weld code requirements for food processing equipment, nuclear plants, & other ind.
Handle Material: Stainless Steel
Head Material: Stainless Steel
Head Length: 6‑1/2 in
Color: Gray

SKU	Overall Length	Handle Type
Cone and Chisel
378-HSS	10-1/2 in	Coil

Steel-Grip Tomahawks®

Features:
• These popular models feature “Flex‑O” steel coil hand grips welded to tough steel handle shafts.
• Heads are “pinned” for safety and reliability.
• Manufactured under the same rigid standards as all hammers.
• Made in the U.S.A.
Handle Material: Steel
Head Material: Steel

SKU	Overall Length	Handle Type	Head Length
Cone & Chisel
378-H	10 1/2 in	Coil	6 1/2 in
378-S-20	10 in	Coil	6 in
Cone & Cross Chisel
378-HCP	10 1/2 in	Coil	6 1/2 in
378-S-30	10 in	Coil	6 in

Chipping Hammers

Features:
• Hammer heads are hardened to precisely controlled temperatures for durability and strength.
• Wide‑blade design removes slag faster and adds to the life of the tool.
• Drop forged, heat‑treated, hardened head withstands more grinds.
• Well balanced handle grip for comfort and ease‑of‑use.
Color: Black

SKU	Overall Length	Handle Type	Handle Material	Head Material	Head Length
Cone & Chisel
900-WH-20	280 mm	Straight	Wood	Steel	6.5 in
900-000H	315 mm	Coil	Steel	Forged Steel	7.6 in
Cone & Cross Chisel
900-WH-30	315 mm	Wooden	Hardwood	Forged Steel	7.6 in

Chipping Hammers

SKU	Overall Length	Handle Type
Cone & Chisel
900-CH-200	11 in	Coil

Welding Chipping Hammers

Features:
• Molded on Shock Reduction Grip™ reduces shock up to 50%.
• Forged in one piece.
• Ergonomically correct.
• Made in the USA.
Handle Material: Steel
Head Material: Steel

SKU	Overall Length	Handle Type	Head Length	Color
Chisel and Pointed Tip
268-E3-WC	11 in	Straight	7 1/2 in	Blue

Chipping Hammers

Features:
• Drop‑forged, heat‑treated heads.
• Hammer assembly is welded for maximum strength and safety.
• Reduced impact sting.
Head Material: Steel

SKU	Overall Length	Handle Type	Handle Material	Head Length	Color
Chisel & Pick
380-09140	10 in	Spring	Steel	6 1/2 in	Black
380-09100	12 in	Straight	Hickory	—	—
380-09200	12 in	Straight	Plastic	—	—
Cross Chisel & Pick
380-09210	12 in	Straight	Plastic	—	—
380-09220	12 in	Straight	Plastic	—	—

Drop-Forged Chipping Hammers

Features:
• Drop forged head with “Lenco” imprint.
• Heat treated head for longer use.
• Offers several advantages to the busy welder.
• Hammer and brush are always together—just a quick flip from chipping to brushing.
• Top quality steel replaceable scratch brush.
Handle Material: Steel
Head Material: Steel
Head Length: 6 1/2 in
Color: Black

SKU	Overall Length	Handle Type
Chisel & Pick
380-09010	10 in	Spring

Welder’s Chipping Hammers

Features:
• One end has a sharp 1 1/4” blade with back bevel, other end tapers to a point.
• Flame‑treated handle “Sure‑Lock®” wedged in tapered adze eye.
Handle Material: Hickory
Head Material: High Carbon Steel

SKU	Overall Length	Handle Type
Chisel and Pointed Tip
770-WC12	13-1/4	Straight

Framing Hammers

Features:
• Shock reduction cushion grip.
• Head and handle are fully polished and forged in one piece.
• Offers comfort and durability, while reducing vibrations caused by impact.
• Made in USA.
Handle Type: Straight
Head Material: Steel
Grip Style: Nylon Vinyl Shock Reduction Grip

SKU	Head Weight	Overall Length	Wt.
268-E3-22S	22 oz	16 in	2.22 lb
268-E3-22SM	22 oz	16 in	2.22 lb
268-E3-28SM	28 oz	16 in	2.44 lb
268-E3-30SM	30 oz	16 in	2.8 lb

Ripping Claw Hammers

Features:
• Excellent balance.
• One piece forged tool steel.
• Shock Reduction Grip.
• Made in USA.
Handle Material: Nylon Vinyl
Handle Type: Straight
Grip Style: Nylon Vinyl Shock Reduction Grip®
Head Material: Steel

SKU	Head Weight	Overall Length	Wt.
268-E3-16S	16 oz	13 in	1 3/4 lb
268-E3-20S	20 oz	13 1/2 in	1.96 lb

Curved Claw Hammers

Features:
• Polished head, bell, striking face, back, and sides.
• Octagon‑shaped neck.
• Virtually unbreakable fiberglass handle.
• Solid fiberglass core covered with a molded nylon jacket to resist breakage due to overstrike.
• New grip material reduces handle slickness.
• Factory balanced for maximum striking power.
• Permabond® construction between head and handle.
• For driving and pulling common, unhardened nails only, and for ripping apart wooden structures.
Head Material: Forged Steel

SKU	Head Weight	Overall Length	Handle Material
184-11406	16 oz	13 in	Fiberglass

Wood Handle Nail Hammers

Features:
• Fully heat treated and polished bell face.
• Forged high‑carbon steel head.
• Exclusive rim temper reduces incidences of chipping or spalling.
Handle Material: Hickory
Head Material: Forged High‑Carbon Steel

SKU	Head Weight	Overall Length	Color	Type
680-51-716	16 oz	12-3/4 in	Black	Rip Claw Nailing
680-51-616	16 oz	13-1/4 in	Black	Curved Claw Nailing Hammer

Professional Fiberglass Hammers

Features:
• Patented, hollow core fiberglass handle provides better balance and more effective shock absorption than typical solid fiberglass handles.
• Head “Sure‑Lock®” wedged and epoxy sealed.
• Slip‑resistant grip, contoured for comfort.
Handle Material: Fiberglass
Handle Type: Straight
Grip Style: Slip‑Resistant
Head Material: Forged Steel
Color: Gray
Type: Straight Claw Hammer

SKU	Head Weight	Overall Length
770-FS505M	24 oz	17 in

Professional Framing Rip Hammers

Features:
• Top quality design hammer.
• Proportioned to give excellent balance.
• Handle is triple wedged.
Handle Material: White Hickory
Handle Type: Straight
Head Material: Forged Steel
Color: Natural Wood
Type: Straight Claw Hammer

SKU	Head Weight	Overall Length
770-606M	28 oz	18 in

Blacksmiths’ Cross Pein Sledge Hammers

Features:
• Forged steel head.
• Shatterproof fiberglass handle.
• Non‑slip, comfort grip.

SKU	Handle Type	Handle Material	Head Weight
545-29-035	Classic	Fiberglass	3 lb
545-29-045	Classic	Fiberglass	4 lb

Blacksmith Hammers

Features:
• New England pattern head.
• Forged from high quality, hardened and tempered steel.
• Faces are ground and polished.
Overall Length: 13.8 in
Head Weight: 2 1/2 lb

SKU	Handle Material
680-56-218	Fiberglass

Heavy Hitters® Blacksmith Hammers

Features:
• Blacksmith Hammer has polished striking face and ends of pein are generously beveled to minimize chipping.
• Durable.
Overall Length: 16 in
Head Weight: 3 oz

SKU	Handle Type	Handle Material
770-S48	Straight	Hickory

Hammer Faces

Features:
• The replacement hammer faces feature a non‑marring, broad striking area.
• Made for greater effectiveness, resilience, and versatility as they are easier on your materials than conventional mallets.
Material: Rawhide

SKU	Face Diam	Used With
311-21002	1 1/2 in	—
311-21003	1 3/4 in	Rawhide Hammers
311-21004	2 in	Rawhide Hammers
311-21005	2 3/4 in	Rawhide Hammers

Hammer Striking Tips

Features:
• Interchangeable and replaceable.
• Non‑marring, surface‑protective application.
• Injection‑molded tips eliminates surface scratching, denting, or fracturing.
• Available in eight durometric hardness from Super Soft to Extra Hard.
Hardness Grade: Tough
Tip Shape: Flat
Tip Type: Tough
Used With: Impax® Dead Blow Hammers; Quick Change Hammers

SKU	Face Diam	Color	Material
545-15-154	1-1/2 in	Green	Nylon
545-15-309	3 in	Yellow	Plastic

NUPLAFLEX® Soft Face Hammer Striking Tips

Features:
• Replaceable tip for Dead Blow and Quick Change Hammers.
• Color‑coded for specific hardness.
• Injection‑molded rubber.
• Designed to strike without scratching, denting or fracturing surface.
Hardness Grade: Extra Hard
Material: Plastic
Tip Shape: Flat
Used With: Impax® Dead Blow Hammers; Quick Change Hammers

SKU	Face Diam	Color
545-15-209	2 in	Yellow

Split Head Hammers

Features:
• Does the work of six different hammers because the face can be easily changed.
• The BASA hammer has been the leading refractory hammer for decades.
• Used for installation and demolition of coke ovens, blast furnaces, and other applications where refractory brick (firebrick) is being installed or removed.
Handle Length: 14 in

SKU	Head Material	Face Diam	Head Length	Wt.
311-31002	Rawhide	1 1/2 in	4 1/2 in	2 lb
311-31003	Rawhide	1 3/4 in	4 3/4 in	2 3/4 lb
311-31005	Rawhide	2 3/4 in	5 3/4 in	6 1/2 lb
311-31004	Rawhide	2 in	5 3/8 in	4 lb

Power Drive® Dead Blow Hammers

Features:
• Engineered to perform better than rubber or plastic face hammers.
• Hammer faces are abrasion‑ and impact‑resistant.
• Designed to withstand severe striking applications and are surface protective.

SKU	Head Weight	Head Material	Face Diam	Head Length	Handle Length
545-10-025	2 lb	Polymer over Composite	2 in	5 in	13 3/4 in
545-10-035	3 lb	Polymer over Composite	2 1/2 in	5 1/2 in	14 1/2 in
545-10-045	4 lb	Polymer over Composite	2 3/4 in	5 3/4 in	15 1/2 in

SPS™ Composite Soft Face Hammers

Features:
• Non‑marring soft face hammer featuring a replaceable‑tip design (tips sold separately).
• Ergonomic grip.
• Fiberglass handle.

SKU	Head Weight	Head Material	Face Diam	Handle Length	Wt.
545-09-550	1 lb	Composite/Plastic	1 1/2 in	—	12.16 oz
545-09-505	2 1/4 lb	Composite/Plastic	2 in	13 3/4”	2.4 lb

Dead Blow Hammers

Features:
• Steel shot.
• 30% more driving force with less effort.
• Eliminates sting, vibration, and rebound.
• For maximum safety in non‑sparking applications near combustible materials.
Color: Black

SKU	Head Weight	Head Material	Face Diam	Head Length	Handle Length	Wt.
577-1430DB	2 lb	Rubber	2 in	4 3/8 in	12 3/4 in	1.87 lb
577-1432DB	3 lb	Rubber	2 1/2 in	4 5/8 in	14 in	2.87 lb
577-1431DB	4 lb	Rubber	2 7/8 in	5 in	14 3/8 in	3.62 lb

Compo-Cast® Sledge Model Soft Face Hammers

Features:
• Non sparking soft face sledge hammers.
• Flat area on head allows upright storage.
• Urethane covering helps reduce noise pollution.
• Steel reinforced handle provides added strength and safety, resists breaking on overstrike.
• Dead blow function uses steel shot.

SKU	Head Weight	Head Material	Face Diam	Head Length	Wt.
680-57-552	10-1/2 lb	Urethane	3 in	8-1/4 in	11.35 lb
680-57-554	11-1/2 lb	Urethane	3 in	8-1/8 in	12.3 lb
680-57-550	5 lb	Urethane	2 1/2 in	7 in	5.54 lb