Cleaners & Degreasers
PreSolve® Orange Degreasers
Features:
• High performance industrial degreaser which cleans on contact.
• Does not contain chlorinated solvents.
• Dielectric breakdown strength 32KV.
• Safe on all metals and most plastics (test).
| SKU | Capacity Vol. | Applicable Material | Removes | Chemical Compound |
|---|---|---|---|---|
| 428-01428 | 1 gal | All Metals; Most Plastic | Oil; Grease; Wax; Tar | Petroleum Distillates |
| 428-01420 | 15 oz | Safe on All Metals and Most Plastics | Adhesives; Grease; Wax; Tar; Dirt | Distillates Petroleum Hydrotreated Light |
TriFree Brake Cleaners
Features:
• Heavy-duty performance.
• Instant degreasing action.
• Improves brake performance.
• Does not contain chlorinated solvents.
• Helps stop disc brake squeal.
Applicable Material: Metals
Removes: Grease; Brake Fluid; Oil
| SKU | Capacity Vol. | Chemical Compound |
|---|---|---|
| 428-03620 | 15 oz | Acetone |
ZeroTri® Heavy-Duty Degreasers
Features:
• Fast evaporating.
• Instant degreasing action.
• Ideal for cleaning metals.
Applicable Material: Metals
Removes: Oil; Grease; Wax; Moisture; Dirt
| SKU | Capacity Vol. | Chemical Compound |
|---|---|---|
| 428-03520 | 15 oz | Acetone |
Industrial Strength Cleaners & Degreasers
Features:
Chemical Compound: Poly (oxy‑1, 2‑ethanediyl), .alpha.‑(4‑nonylphenyl)‑.omega.‑hydroxy‑, branched
| SKU | Capacity Vol. | Applicable Material | Odor/Scent |
|---|---|---|---|
| 647-MG132 | 32 oz | Household Cleaning; Garage/Home; BBQ Grill | Low Odor |
| 647-MG102 | 1 gal | Kitchen; Laundry; Patio; Bathroom; Garage | Low odor |
Safety Solvents
Features:
• Fast drying.
• Non‑flammable and non‑conductive formula can be used on motors while running.
• Dielectric.
• Leaves no residue.
Dielectric Strength: 32,000 V/mil
Color: Colorless
Removes: Dirt; Grease; Grime
Chemical Compound: Chlorinated Solvent
Odor/Scent: Chlorinated Solvent
| SKU | Capacity Vol. |
|---|---|
| 480-S101 | 20 oz |
Contact & Circuit Board Cleaner III
Features:
• Fast dry flammable electronics cleaner.
• Removes, dirt, dust, flux and light oils.
• Compatible with component plastics, rubber and metal.
• Non‑ozone depleting; no CFC’s or HCFC’s
Applicable Material: Electronics; Metals; Plastic
Removes: Dirt; Flux; Oil; Other Contaminants
Chemical Compound: Tetrafluoroethane; Bromopropane; Dichloropentafluoropropane; Methyl Alcohol
Odor/Scent: Solvent
| SKU | Capacity Vol. | Fill Amount |
|---|---|---|
| 019-1002285 | 11 oz | 16 oz |
Tide® Floor and All-Purpose Cleaners
Features:
• High levels of surfactant and builders combined to cut through tough grease.
• UL Classified for slip resistance.
• Easy‑rinse powder formula is ideal for quarry tile.
Removes: Dirt; Grime; Stains
Chemical Compound: Alkyl Benzene Sulfonate; Sodium Carbonate
Specific Gravity: 2.602
| SKU | Capacity Vol. |
|---|---|
| 608-02364 | 36 lb |
Brake Cleaners
Features:
• Quickly dissolves and flushes away brake dust, brake fluid, grease, oil and other contaminants.
• Not for sale in California.
• Not for sale in California or New Jersey.
Applicable Material: All Metals
Removes: Grease; Oil; Brake Dust; Dirt; Grime
| SKU | Capacity Vol. | Chemical Compound |
|---|---|---|
| 615-M7-15 | 14 oz | 2-Propanone; Heptane; Sylene; Carbon Dioxide |
| 615-M7-20 | 19 oz | Carbon dioxide, dichloromethane, tetrachloroethylene |
Electric Motor Contact Cleaners
Features:
• A non‑flammable, non‑conducting cleaning solvent for alternators, generators, starters, contact relays and electric components.
• Also excellent for brake linings and CV joints.
| SKU | Capacity Vol. | Removes | Applicable Material |
|---|---|---|---|
| 615-NM1 | 20 oz | Grease; Gum; Oil; Tar | All Metals |
Super Concentrate Degreasers
Features:
• Dilutes with kerosene and other similar petroleum solvents.
• An economical concentrated cleaner helps dissolve grease.
Removes: Heavy-duty Baked on Grease; Oil; Dust; Dirt
| SKU | Capacity Vol. | Applicable Material | Chemical Compound |
|---|---|---|---|
| 615-SC-5 | 5 gal | All Metals | Solvent Based |
Crystal Simple Green
Features:
• Effective concentrated cleaner and degreaser for industrial and manufacturing applications.
• Suitable for critical cleaning tasks that demand a fragrance‑free solution.
• High rinsability factor meets requirements for cleaning in cosmetic, medical and pharmaceutical environments.
• Powerful, all‑purpose cleaning and degreasing with no added color or scent.
| SKU | Capacity Vol. | Color | Removes | Chemical Compound |
|---|---|---|---|---|
| Applicable Material: Any Hard, Non-porous, Washable, Rinsable Surface | ||||
| 676-0610000619128 | 1 gal | Clear | Grease; Grime; Dirt; Dust; Oil | Ethoxylated Alcohol |
| 676-0610001219024 | 24 oz | Clear | Grease; Grime; Dirt; Dust; Oil | Ethoxylated Alcohol |
| 676-0600000119005 | 5 gal | Clear | Grease; Grime; Dirt; Dust; Oil | Ethoxylated Alcohol |
| 676-0600000119055 | 55 gal | Clear | Grease; Grime; Dirt; Dust; Oil | N/A |
| Applicable Material: Metals; Finished Wood; Laminates; Fiberglass; Plastic; Rubber; Porcelain; Ceramic; Stone | ||||
| 676-0610001219010 | 20 oz | White | Grease; Oil; Wet Paint; Carbon; Graphite; Tar; Soot | N/A |
Extreme Aircraft & Precision Cleaner
Features:
• Cuts through tough, built up grease, oil, dirt and more.
• High soil capacity and superior grease‑cutting ability.
• Non‑flammable, petroleum‑distillate‑free formula.
Applicable Material: Aircraft Structural Metals, Plastics, Paints
Removes: Grease; Oil; Dirt; Insect Residue; Pollution; Impact Soils
| SKU | Capacity Vol. | Chemical Compound |
|---|---|---|
| 676-0100000113405 | 5 gal | Aqueous Based Mixture |
Industrial Cleaner & Degreaser
Features:
• Easily cuts through thick grease, oils, hydraulic fluids and built‑up grime on all washable surfaces.
• Safe for use in cleaning equipment including floor scrubbers, carpet cleaners and parts washers.
Applicable Material: Carpet; Ceramics; Cement/Concrete; Enamel; Fabric; Fiberglass; Laminates; Metal; Plastic; Upholstery
Chemical Compound: Ethoxylated Alcohol; Sodium Citrate; Sodium Carbonate; Citric Acid
| SKU | Capacity Vol. | Removes |
|---|---|---|
| 676-2710200613005 | 1 gal | Grease; Oil; Dirt; Soil |
| 676-2700000113006 | 5 gal | Grease; Oil; Dirt; Soil |
| 676-2710001213012 | 24 oz | Grease; Oil; Dirt; Soil |
| 676-2700000113008 | 55 gal | Grease; Oil; Dirt; Soil |
Simple Green® Original Formula Cleaners
Features:
• Cost‑effective water‑based liquid concentrate can be diluted for various cleaning jobs.
• Nonflammable, nonhazardous, butyl‑ and phosphate‑free.
• Nontoxic and biodegradable fluid.
Applicable Material: Water‑Safe Surfaces
Removes: Grease; Oil; Dirt; Dust; Carbon; Soot; Baked‑On Soil; Grime; Food Residue
| SKU | Capacity Vol. | Chemical Compound |
|---|---|---|
| 676-2710001213033 | 32 oz | Ethoxylated Alcohol; Sodium Citrate; Sodium Carbonate; Citric Acid |
Grez-Off HD Degreasers
Features:
• Grez‑Off is an award-winning, grease buster.
• Professional strength, water‑based, biodegradable formula.
• Grez‑Off® digs into grease and grime, prying it away like no other product can.
• For use on engines, machinery, tools, mowers, conveyors, vents, work benches, walls and floors.
• Also effective on ovens, grills, trunks, trailers, RV’s, industrial and farm equipment, concrete, asphalt, vinyl, rubber, plastic, metal and more.
Applicable Material: Concrete; Tools; Machinery; Plastic; Metal; Asphalt
| SKU | Capacity Vol. | Removes |
|---|---|---|
| 253-22732 | 32 oz | Grease; Grime |
Citrus Cleaner Degreasers
Features:
• Biodegradable, heavy‑duty, multi‑purpose cleaner.
• No CFCs or HCFCs.
• Pleasant Citrus Scent
Applicable Material: Formica®; Fiberglass; Wood; Ceramic; Some Plastics
| SKU | Capacity Vol. | Removes | Chemical Compound |
|---|---|---|---|
| 425-SC0757000 | 16 oz | Grease; Oil; Tar; Wax | Water |
Electrical Spray Lubricant & Cleaners
Applicable Material: Switches; Relays; Timers; Signals; Contacts; Panel Boards; Speakers
| SKU | Capacity Vol. | Removes | Chemical Compound |
|---|---|---|---|
| 425-S02001000 | 16 oz | Grease; Dust; Dirt; Oxidation | Solvent |
Environmental Cleaner & Degreasers
Features:
• Fast, effective removal of dirt, oil, grease, wax and tar.
• For use on non‑energized equipment.
Applicable Material: Electric Motors; Radar Equipment; Gears; Brakes; Generators
| SKU | Capacity Vol. | Removes | Chemical Compound |
|---|---|---|---|
| 425-S00749000 | 15 oz | Grease; Oil; Tar; Wax | Solvent |
FLASH FREE® Electrical Degreasers
Features:
• Excellent for degreasing aluminum and cleaning sheet and strip steel prior to galvanizing.
• Increases life of electrical components by removing foreign materials.
Removes: Grease; Dirt; Wax; Metallic Particles, and Oil
| SKU | Capacity Vol. | Chemical Compound |
|---|---|---|
| Applicable Material: Wire Rope | ||
| 425-SC0848000 | 13 oz | Solvent |
| 425-SC0848T00 | N/A | Solvent |
General Purpose Cleaners
Features:
• All‑purpose formula that cuts through dirt with ease.
• Use on countertops, finished wood, glass surfaces, leather and vinyl interiors, ceramic or porcelain fixtures and spots on carpeting.
Applicable Material: Metals; Wood; Porcelain; Vinyl; Leather; Laminated Surfaces; Glass
| SKU | Capacity Vol. | Removes | Odor/Scent |
|---|---|---|---|
| 425-SC0880000 | 19 oz | Grease; Fingerprints | Fragrance‑Free |
Layout Fluid Removers
Features:
• Specially formulated to remove layout fluids quickly and efficiently.
• Does not contain chlorinated solvents.
Removes: Light Soils; Greases; Lacquer Materials; Other Markings
| SKU | Capacity Vol. | Applicable Material | Chemical Compound |
|---|---|---|---|
| 425-SC0606000 | 12.75 oz | Metals; Glass | Solvent |
Methylene Chloride Free Paint Remover
Features:
• Developed for use in the removal of coatings, varnishes, epoxies and urethanes.
• The unique surfactant/solvent system allows for rapid penetration and removal of many common coatings.
Applicable Material: Ceramic Tile; Concrete; Glass; Metal; Stone; Wood
Removes: Coatings; Decals; Enamels; Epoxy; Lacquer; Shellac; Varnish
| SKU | Capacity Vol. | Chemical Compound | Odor/Scent |
|---|---|---|---|
| 425-S00915000 | 16 oz | Solvent | Ammonia |
SP705 Non-Chlorinated Brake & Parts Cleaners
Features:
• Instantly flushes away brake fluids, grease and dirt to ensure accurate adjustments and smooth brake operations.
• This non‑chlorinated formula is also recommended as a cleaner for metal parts.
| SKU | Fill Amount | Odor/Scent |
|---|---|---|
| 425-SC0705000 | 14 oz | Mild Solvent |
Stainless Steel Cleaners
Features:
• Water‑based emulsion.
• Effectively cleans most water and oil‑based stains on stainless steel and other metal surfaces.
• Invisible coating resists finger‑prints, watermarks and rusting.
Applicable Material: Metals; Stainless Steel
| SKU | Capacity Vol. | Removes | Chemical Compound |
|---|---|---|---|
| 425-S00885000 | 17 oz | Fingerprints; Oil | Water |
Specialist Contact Cleaner
Features:
• Convenient specialist contact cleaner uses Smart Straw® technology‑based spray to blast away oil, dirt, flux residue and condensation from sensitive electronics.
• Safe to use on plastic, rubber or metal.
Applicable Material: Plastic; Rubber; Metal; Sensitive Electronics; Electrical Equipment
Chemical Compound: Heptane; Isopropyl Alcohol (Isopropanol); 1,1 Difluoroethane
| SKU | Capacity Vol. | Removes |
|---|---|---|
| 780-300554 | 11 oz | Oil; Dirt; Flux Residue; Condensation |
Fast Evaporating Aerosol Solvent Degreasers
Features:
• Choose a fast, powerful clean with an industrial degreaser that quickly penetrates and removes soils from a variety of surfaces.
• Fast‑evaporating degreaser evaporates completely, leaving no detectable residue.
• Cleanser is non‑corrosive to metals.
• Easy‑to‑use spray designed with a valve that sprays in both upright and inverted postions.
• Also safe for use on most plastics.
• Removes oil, grease, grime, lubricants and tar from electrical contacts, electric motors, machinery parts, electronic equipment and more.
Applicable Material: Metal; Plastic
Chemical Compound: Ethanol; Isopropyl Alcohol; Methanol
| SKU | Capacity Vol. | Removes |
|---|---|---|
| 019-1040698 | 14 oz | Grease; Grime; Lubricants; Oil; Tar |
Foaming AC Coil Cleaners
Features:
• No rinsing required.
• Air conditioning coil cleaner designed to clean the exterior surfaces of coils on window and rooftop air conditioning units.
• VOC compliant.
Applicable Material: Air Conditioning Coils
| SKU | Capacity Vol. | Fill Amount | Removes |
|---|---|---|---|
| 019-1040605 | 20 oz | 18 oz | Dirt; Dust; Grease |
Cleaning Products Accessories
Empty Trigger Bottles
Features:
• For use with bulk cleaners.
• Features volume measurements as well as blank lines and boxes where users can add their own product and safety information.
• Non‑pressurized disposable applicator for liquids.
Used With: Bulk Cleaners
| SKU | Color | Type | Height | Length |
|---|---|---|---|---|
| 125-14021 | White/Red | Trigger Spray | 10 1/4 in | 3 in |
INSECT & WEED CONTROLLING PRODUCTS
Insect Killers
Bee Blast™ Wasp & Hornet Killer
Features:
• Fast acting.
• No chlorinated solvents.
• 20’ jet blast.
| SKU | Container Size | Insect Type |
|---|---|---|
| 125-14009 | 20 oz | Ants; Scorpions; Spiders; Wasps & Hornets |
Wasp & Hornet Killer Plus™ Insecticides
Features:
• Will not damage plastic connectors and other insulating materials.
• CRC trigger provides a dense, accurate spray that will reach over 20 feet to drench harmful insects and their nests.
• The only wasp and hornet killer in the industry with CRC’s patented M.S.D.[L.], a current MSDS printed on the reverse side of the product label.
• Will not damage plastic connectors and other insulating materials.
| SKU | Container Size | Insect Type |
|---|---|---|
| 125-14010 | 20 oz | Bees; Scorpions; Spiders; Wasps & Hornets; Yellow Jacket |
The End.™ Insecticides
Features:
• Instant knockdown.
• Sprays up to 20 ft.
• Kills nest and insects with residual action
| SKU | Container Size | Insect Type |
|---|---|---|
| 253-18320 | 20 oz | Bees; Wasps & Hornets; Yellow Jackets |
Instant Knockdown Wasp & Hornet Killer
Features:
• Eliminate dangerous pests with a spray that keeps you safe from bees, wasps, hornets and yellow jackets.
• Long‑reaching knockdown reaches up to 22 feet.
• Kills insects on contact.
| SKU | Container Size | Insect Type |
|---|---|---|
| 019-ewhik16 | 16 oz | Hornets; Wasps |
Blast’EM™ Wasp & Hornet Killer
Features:
• 98% knockdown, 100% kill within 24 hours.
• Sprays up to 20 feet with flood‑type valve.
• Residual deposit will kill returning wasps and hornets.
• For outside use only.
| SKU | Container Size | Insect Type |
|---|---|---|
| 425-S00857000 | 16 oz | Flies; Mosquitoes; Moths; Wasps & Hornets; Yellow Jackets |
| 425-S02085700 | 20 oz | Flies; Mosquitoes; Moths; Wasps & Hornets; Yellow Jackets |
LEAK DETECTORS & PENETRANTS
Leak Detectors
Leak-Detection Compounds
Features:
• Get the job done with a clear, free‑flowing liquid leak detector with no objectionable odor.
• Can be used with all welding gases.
• Approved for oxygen use.
| SKU | Capacity Vol. | Packing Type |
|---|---|---|
| 437-300-08 | 8 oz | Bottle |
Leak Detectors
Features:
• Forms a readily visible and stable foam for easy and efficient leak detection.
• Safe for all gases, including oxygen.
• Non‑corrosive and non‑flammable.
| SKU | Capacity Vol. |
|---|---|
| 368-DF8004X1 | 1 gal |
Sure-Chek® All-Temperature Leak Detectors
Features:
• Ultra‑sensitive.
• Long‑lasting bubbles.
• Fluorescent for improved visibility.
• Safe for oxygen.
• Non‑corrosive, non‑toxic.
• Low chlorides.
| SKU | Capacity Vol. | Applications |
|---|---|---|
| 434-32850 | 1 pt | Gas & Oxygen Pipe |
Leak Detectors
Features:
• Non‑Toxic, non‑flammable.
• Does not collect dust.
• Does not contain chlorine, aliphalic amines, or ammonium compounds.
| SKU | Capacity Vol. | Applications | Wt. |
|---|---|---|---|
| 747-1GAL-SNOOP | 1 gal | Gases | 9.51 lb |
| 747-8OZ-SNOOP-BL | 8 oz | Gases | 0.7 lb |
| 747-8OZ-SNOOP | 8 oz | Gases | 1/2 lb |
Leak Test Solutions
Features:
• Pinpoints leaks with visible bubbles.
• Oxygen safe – dries clean.
• For use with manifold equipment.
| SKU | Capacity Vol. | Packing Type | Wt |
|---|---|---|---|
| 312-LT-200 | 1 gal | Bottle | 4 1/2 lb |
Magnetic Particles
Magnaglo® 14A Wet Method Fluorescent Magnetic Particles
Features:
• Fluorescent wet method particles.
• Most widely used, general purpose.
• Highly sensitive and meets all wet method specifications.
Suspension medium: water or oil.
| SKU | Capacity Wt. | Type |
|---|---|---|
| 387-01-0130-71 | 1 lb | Fluorescent Magnetic Particles |
Magnaglo® 14A Wet Method Redi-Bath™ Fluorescent Premix Concentrates
Features:
• Fluorescent wet method solution.
• Concentrated mix of 14A particles, water, wetting agent, and corrosion inhibitor.
• Easy‑to‑use, just add concentrate to water.
| SKU | Capacity Wt. | Type |
|---|---|---|
| 387-01-9130-41 | 27 oz | Fluorescent Magnetic Particles |
Magnaglo® 14AM Fluorescent Premixed Prepared Bath with Carrier ll
Features:
• Ready‑to‑use fluorescent wet method bath.
• Prepared bath of 14A particles and Carrier II oil vehicle.
• Assures proper concentration.
• No mixing or measuring.
• Suspension medium: oil.
| SKU | Type | Wt |
|---|---|---|
| 387-01-0145-40 | Fluorescent Magnetic Particles | 40 lb |
Magnaglo® 14AM Prepared Oil Bath
Features:
• Fluorescent prepared bath combines 14A powder with Carrier II oil.
• Ready‑to‑use without measuring and mixing.
• Used to locate fine surface and subsurface discontinuities such as: inclusions, seams, shrink cracks, tears, laps, flakes, welding defects, and grinding, quenching or fatigue cracks.
| SKU | Type |
|---|---|
| 387-01-0145-78 | Magnetic Particle Inspection Fluid |
Magnaglo® 20B Wet Method Preblended Dry Mixes
Features:
• Easy‑to‑use fluorescent wet method mix.
• Pre‑blended mix of 14A particles and WA‑2B conditioner.
Suspension medium: water.
| SKU | Capacity Wt. | Type |
|---|---|---|
| 387-01-0179-71 | 1 lb | Fluorescent Magnetic Particles |
Magnaglo® Aqua-Glo™ 14A Wet Method Fluorescent Premix/Waters
Features:
• Fluorescent wet method solution.
• Prepared solution of 14A particles in a water based medium.
| SKU | Type |
|---|---|
| 387-01-1725-38 | Fluorescent Magnetic Particles |
Magnaglo® Carrier II Oil
Features:
• Convenient carrier oil is a suspension vehicle formulated for magnetic particle testing.
• Virtually odor‑free.
• Low‑viscosity oil, with no fluorescence.
• Contains high flash point in excess of 200 °F.
| SKU | Packing Type | Wt. |
|---|---|---|
| 387-01-2122-45 | Drum | 404 lb |
| 387-01-2122-40 | Pail | 37.7 lb |
Magnavis® 7HF Black Visible Magnetic Particle Wet Method Prepared Bath
Features:
• Designed for spot inspections of parts that must be inspected in the field due to size or location.
• Composed of Magnavis® 7C Magnaflux magnetic powder suspended in a low volatility mineral oil.
• Suitable for inspection of tubes, piping and other large structures.
| SKU | Type |
|---|---|
| 387-01-1580-78 | Magnetic Particle Inspection Fluid |
Magnavis® Dry Method Non-Fluorescent Magnetic Powders
Features:
• Get the job done with ready to use, free flowing, general purpose magnetic powders.
• Powders produce clear, sharp indications across a variety surfaces and background colors.
• They’re designed to produce superior indications of surface and slightly subsurface discontinuities in ferrous materials.
• Use to identify indications in welds, large forgings and castings.
| SKU | Capacity Wt. | Type |
|---|---|---|
| 387-01-1716-69 | 10 lb | Dry Method Magnetic Particles |
| 387-01-1780-69 | 10 lb | Dry Method Magnetic Particles |
| 387-01-1732-69 | 10 lb | Dry Method Magnetic Particles |
| 387-01-1780-87 | 45 lb | Dry Method Magnetic Particles |
Magnavis® WCP-2 Contrast Paint
Features:
• Designed for use in applications where the contrast in color between the part being tested and the magnetic particles being used is insufficient for reliable identification of flaws.
• Composed of acetone and inorganic pigments and utilizes a carbon dioxide aerosol propellant for ease of application.
• Can be used with both dry and wet‑method magnetic particles.
| SKU | Type |
|---|---|
| 387-01-2250-78 | Magnetic Particle Inspection Fluid |
Penetrant Kits
Visible Red-Dye Penetrant Test Kits
Features:
• Visible liquid‑dye penetrant testing is a 3‑step process.
| SKU | Used For |
|---|---|
| 368-DF315-KIT-S | Detecting faults in welds, casting and alloys |
Spotcheck® Kits
Features:
• SPOTCHECK visible penetrant kits quickly locate surface cracks.
• Easy to transport for field inspections.
• No UV light required because of vivid red indications.
| SKU | Includes | Wt. |
|---|---|---|
| 387-01-5920-48 | (2) Cans of SKD-S2 Developer; (2) Cans of SKL-SP2 Penetrant; (4) Cans of SKC-S Cleaner/Remover; Instructions; Paint Marker; Portable Plastic Case; Scrub Hand Towels; Wiping Cloth |
10 lb |
Spotcheck® Penetrant Inspection Kits
Features:
• Reveals cracks and other surface discontinuities in virtually any non‑porous material.
• Uses high concentration of quality dyes and high quality solvents to provide superior dye penetrants for finding defects.
• No ultraviolet black light required for visible red dye liquid penetrant inspections.
| SKU | Includes | Wt. |
|---|---|---|
| 387-01-5970-48 | (1) Can of SKD-S2 Developer; (1) Can of SKL-SP1 Penetrant; (2) Cans of SKC-S Cleaner/Remover; Instructions; Paint Marker; Portable Plastic Case; Scrub Hand Towels; Wiping Cloth |
6 lb |
PB™ Penetrating Catalysts
Features:
• Great for loosening rusted or frozen screws and bolts.
• Effective rust inhibitor.
• Non‑evaporating lubricant.
• Penetrates into hard‑to‑reach areas.
• Suitable for brake, exhaust and suspension system jobs.
| SKU | Capacity Vol. | Physical Form | Packing Type |
|---|---|---|---|
| 108-8-PB | 8 oz | Liquid | Can |
| 108-16-PB | 11 oz | Liquid | Aerosol Can |
| 108-128-PB | 1 gal | N/A | Bottle |
Cleaner Dye Penetrants
Features:
• Blend of petroleum hydrocarbon solvents.
• Cleaner.
Test & Approvals: Meets ASME Section V Halogen and Chloride Content Requirements
| SKU | Capacity Vol. | Physical Form |
|---|---|---|
| 437-C101-A | 12 oz | Liquid |
Developer Dye Penetrants
Features:
• Convenient, non‑aqueous standard wet developer that sprays out white for red dye indications.
• Locates surface flaws quickly and easily.
• Excellent for finding cracks in production equipment, manufactured parts and spot checking of stress susceptible machinery.
• Does not require additional equipment to provide visible indications under normal light conditions, perfect for field-testing without downtime.
Test & Approvals: Meets ASME Section V Halogen and Chloride Content Requirements
| SKU | Capacity Vol. | Physical Form |
|---|---|---|
| 437-D101-A | 12 oz | Liquid |
Visible Dye Penetrant Systems
Features:
• The visible liquid dye penetrant testing is a three‑step process of detecting faults in welds, castings, exotic alloys and standard materials.
• Faults could be cracks, pinholes or welding laps on the metal surface.
| SKU | Capacity Vol. | Packing Type |
|---|---|---|
| 368-CF315-16 | 16 oz | Aerosol Can |
| 368-CNF315-16 | 16 oz | Aerosol Can |
| 368-DNF315-16 | 16 oz | Aerosol Can |
| 368-PHF315-16 | 16 oz | Aerosol Can |
Spotcheck® SKC-S
Features:
• Used in the liquid penetrant inspection process.
• Used on a moist cloth to remove surface penetrant from the inspection area prior to applying developer.
| SKU | Capacity Vol. | Physical Form | Packing Type |
|---|---|---|---|
| 387-01-5750-78 | 16 oz | Liquid | Aerosol Can |
| 387-01-5352-35 | 1 gal | Liquid | Can |
| 387-01-5750-35 | 1 gal | Liquid | Can |
| 387-01-5750-40 | 5 gal | Liquid | Pail |
Spotcheck® SKL-SP2 Solvent Removable Penetrant
Features:
• Choose a dependable penetrant, like this solvent removable red color contrast penetrant.
• Offers maximum reliability in locating surface‑open flaws and discontinuities.
Packing Type: Aerosol Can
| SKU | Capacity Vol. | Physical Form |
|---|---|---|
| 387-01-5155-78 | 16 oz | Liquid |
Spotcheck® SKL-WP2 Water Washable Penetrants
Features:
• Speed your work process, with a convenient low odor, water washable penetrant that exhibits outstanding penetrating characteristics and discontinuity identification.
• Eliminates the need for solvent removers or emulsifiers in the elimination of excess surface penetrant.
| SKU | Capacity Vol. | Physical Form | Packing Type |
|---|---|---|---|
| 387-01-5190-78 | 16 oz | Liquid | Aerosol Can |
| 387-01-5190-35 | 1 gal | Liquid | Bottle |
Zyglo® ZL-60D Water Washable Fluorescent Penetrants
Features:
• Water washable penetrant.
• Normal sensitivity (level 2).
• Can be used in open dip tanks.
• Fluoresces bright greenish‑yellow under ultraviolet radiation.
• High flash point.
• Medium sensitivity (level 2).
• Safe for use on most engineering and aerospace alloys, including aluminum, steel, nickel and titanium.
| SKU | Capacity Vol. | Physical Form | Packing Type |
|---|---|---|---|
| 387-01-3272-78 | 16 oz | Liquid | Aerosol Can |
| 387-01-3272-40 | 5 gal | Liquid | Pail |
Zyglo® ZL-67 Water Washable Fluorescent Penetrants
Features:
• ZL‑67 fluoresces a bright greenish‑yellow under ultraviolet radiation and is safe for use on most engineering and aerospace alloys including aluminum, steel, nickel and titanium.
• Can be used in dip tanks.
• High flash point.
• Safe for use on most engineering and aerospace alloys, including aluminum, steel, nickel and titanium.
• ZL‑67 fluoresces a bright greenish‑yellow under ultraviolet radiation.
| SKU | Capacity Vol. | Physical Form |
|---|---|---|
| 387-01-3274-40 | 5 gal | Liquid |
Zyglo® ZP-9F Developer
Features:
• Durable developer is a reliable choice for non‑destructive testing (NDT).
• Dispersion of organic particles in isopropyl alcohol and acetone.
• Produces an opaque white coating which provides an excellent contrasting background for Spotcheck® or Zyglo® penetrant indications.
| SKU | Capacity Vol. | Physical Form |
|---|---|---|
| 387-01-3354-78 | 16 oz | Liquid |
Surface Irregularity Testing Product Accessories
Weld Check Developers
Features:
• Quick drying developer for the non‑destructive testing of surfaces and structures.
• Non‑destructive inspection of materials, parts, assemblies, equipment, surfaces or structures.
| SKU | Capacity Volume | Packing Type |
|---|---|---|
| 125-03107 | 10.5 wt oz | 16 oz Aerosol Can |
Replacement Copper Contact Pads
Features:
• Prevent arc burn by helping maintain proper electrical contact between test parts and contact heads.
• Replacement braided copper contact pad.
| SKU | Includes |
|---|---|
| 387-1848 | Carrying Case |
Spotcheck® SKD-S2 Solvent Developers
Features:
• Non‑halogenated, ready‑to‑use solvent developer.
• Suspends white developing particles in a fast drying solvent.
• Produces opaque white coating that provides excellent contrasting background for penetrant indications.
| SKU | Capacity Volume | Packing Type |
|---|---|---|
| 387-01-5352-78 | 16 oz | Aerosol |
| 387-01-5352-40 | 5 gal | Pail |
Ultragel® II High Performance Ultrasonic Couplants
Features:
• For flaw detection and sizing, thickness gauging, flow metering, and acoustic emission testing.
• Known for its outstanding performance, and comprehensive range of specifications and approvals.
| SKU | Capacity Volume | Packing Type |
|---|---|---|
| 387-25-912 | 12 fl oz | Bottle |
| 387-25-901 | 1 gal | Bottle |
LUBRICANTS & PENETRANTS
Anti-Seize Compounds
Food Grade Anti-Seize and Lubricating Compounds
Features:
• For applications where incidental food contact is possible.
• Prevents seizing, galling, rust, corrosion and heat freeze.
• Non‑staining and odorless; conductive.
Chemical Compound: Synthetic Base
Resistance: Corrosion; Galling; Heat Freeze; Rust; Seizing
Applicable Materials: Food Processing Machinery
| SKU | Capacity Wt. | Packing Type | Physical Form |
|---|---|---|---|
| 125-SL35905 | 8 oz | Brush-Top Bottle | Semi‑Solid Paste |
Thread Lubricants
Features:
• A general purpose lubricant that prevents the seizing and galling of threaded surfaces caused by corrosion.
• Safe for use on ferrous and non‑ferrous metals.
Applicable Materials: Aluminum Conduit; Fittings
| SKU | Capacity Wt. | Chemical Compound | Resistance | Physical Form |
|---|---|---|---|---|
| 125-SL35925 | 8 oz | Lithium‑12 Base | Galling; Seizing | Semi‑Solid to Solid Grease |
Defense Concentrates
Features:
• Provides year‑round pump protection for water recirculators and closed loop cooling systems.
• Reduces the need for water fill maintenance by reducing water evaporation.
Applications: Water Recirculator Pumps; Closed Loop Cooling Systems
| SKU | Capacity Wt. | Chemical Compound |
|---|---|---|
| 368-DF929-1 | 1 gal | Ethylene Glycol |
Noalox® Anti-Oxidant Joint Compounds
Features:
• Carrier material excludes air to prevent further oxidation.
• For use with all types of pressure‑type wire connectors.
• Reduces galling and seizing on aluminum conduit joints, promoting good grounding continuity and improves the efficiency and service life of aluminum electrical applications.
| SKU | Capacity Wt. | Chemical Compound | Applications |
|---|---|---|---|
| 131-30-030 | 8 oz | Zinc | Aluminum Electrical |
550® Extreme Nonmetallic Anti-Seize Compound
Features:
• Extreme series features new generation complex base grease that is fortified with proven rust and corrosion inhibitors.
• Effective anti‑seize on LPG and other gasses.
• Will not harden, evaporate, or settle out.
Chemical Compound: Zinc Oxice; Limestone; Graphite; Molybdenum (IV) Sulfide
Applicable Materials: Iron; Steel; Aluminum; Copper; Brass; Plastic; Titanium
Applications: Gaskets; Flange Faces; Fittings; Threads; Alkey Gaskets; Guides; Slides
Physical Form: Semi‑Fluid Gel
Odor/Scent: Petroleum
| SKU | Capacity Wt. | Packing Type | Color |
|---|---|---|---|
| 399-47104 | 1 lb | Brush Top Can | Black |
550® Nonmetallic Anti-Seize Compounds
Features:
• Maximum protection against seizure and heat freeze.
• Will not harden, evaporate, or settle out.
Color: Steel Blue
Applicable Materials: Iron; Steel
Quantity: 12 per case
| SKU | Capacity Wt. | Chemical Compound | Applications |
|---|---|---|---|
| Packing Type: Brush Top Can; Physical Form: Smooth Paste | |||
| 399-15502 | 1/2 lb | Molybdenum disulfide, graphite and low-friction fillers in an aluminum complex base grease; Rust and corrosion inhibitors |
Protection Against Seizure, Heat Freeze, Rust, Oxidation and Corrosion |
| 399-15504 | 1 lb | Petroleum Based | Steel; Aluminum; Alloys; Plastic |
High Temperature Anti-Seize & Gasket Compounds
Features:
• Provides a shield against metal‑to‑metal contact, preventing seizure and corrosion.
• Assures protection against rust, oxidation, and corrosion.
Color: Copper
Chemical Compound: Petroleum Based
Applicable Materials: Most Metals
Applications: Threaded Connections
Physical Form: Paste or Gel
| SKU | Capacity Wt. | Packing Type | Quantity |
|---|---|---|---|
| 399-10041 | 12 oz | Aerosol Can | 12 cans/case |
| 399-10055 | 1/4 lb | Can | 1 Can |
| 399-10002 | 1/2 lb | Can | 12 cans/case |
| 399-10004 | 1 lb | Can | 12 cans/case |
| 399-10091 | 1 gal | Pail | 1 each |
Marine Moly™ Moly Pastes
Features:
• Protects working parts, prevents galling, and heat‑freeze.
• Can be applied by brush or spatula to hot surfaces without running or dripping off.
Chemical Compound: Clay; Petroleum Base
Applicable Materials: Most Metals
| SKU | Capacity Wt. | Color | Applications | Physical Form |
|---|---|---|---|---|
| 399-65005 | 1 lb | Black | Gear | Paste or Gel |
Nikal® High Temperature Anti-Seize & Gasket Compounds
Features:
• Provides superb protection against rust from water penetration and washoff.
• Does not contain copper, lead, graphite, molybdenum MOSL, chlorides or other halogens, phosphorus, or silicones.
Color: Silver
Chemical Compound: Petroleum Based with Nickel
Applicable Materials: Most Metals; Stainless Steel
Physical Form: Paste or Gel
| SKU | Capacity Wt. | Packing Type | Applications |
|---|---|---|---|
| 399-13604 | 1 lb | Can | Use extensively in nuclear power generator facilities on land and sea where only CERTIFIED products are allowed. |
| 399-13602 | 1/2 lb | Can | Anti-seize When Copper Products are Prohibited |
SS-30™ High Temperature Anti-Seize & Gasket Compounds
Features:
• Protects against seizure, heat freeze, galling rust and corrosion.
• Will adhere to wet or oily surfaces.
• Brushes evenly over thread roots or uneven surfaces, assuring efficient coverage.
Color: Copper
Chemical Compound: Petroleum Based
Thickener: Organo Clay
Resistance: Corrosive Process; Wear
Applicable Materials: Brass; Cast Iron; Copper; Most Metals; Plastic; Stainless Steel
Applications: Taps; Lugs; Wiping Contacts
Physical Form: Paste or Gel
Odor/Scent: Petroleum-like
Quantity: 1 each
| SKU | Capacity Wt. | Packing Type | Specific Gravity |
|---|---|---|---|
| 399-12502 | 1/2 lb | Brush Top Can | 1.2 |
| 399-12504 | 1 lb | Brush Top Can | N/A |
Nickel Anti-Seize Lubricants
Features:
• Prevents seizure up to 2600º F (1427º C).
• Contains no lead, copper, graphite, chlorides, phosphorous, silicone or halogens.
• Protects against seizure, rust and corrosion.
• Prevents water wash-off.
• Can be used with ammonia, acetylene and vinyl monomers.
• Safe on stainless steel when temperatures exceed 550° F (288° C).
• Will not run, drip or settle out.
Chemical Compound: Nickel
Thickener: Aluminum
Resistance: Water; Corrosive Process; Moisture; Impact
Applicable Materials: Metals
Applications: Bushings; Engines; Flanges; Furnaces; Heat Exchangers; Manifolds; Nults; Bolts
Physical Form: Paste
Quantity: 1 each
| SKU | Capacity Wt. | Packing Type | Color |
|---|---|---|---|
| 428-03910 | 1 lb | Brush Top Bottle | Silver Gray |
E-Z Break® Anti-Seize Compound
Features:
• Contains fine metallic particles to tenaciously coat and protect metal from heat, pressure and corrosion.
• Protects against galling, seizing and corrosion and keeps components working longer in harsh environments.
• Serves as an extreme pressure lubricant.
Resistance: Rust; Corrosion
Applicable Materials: Stainless Steel
Quantity: 24 Per Case
| SKU | Capacity Wt. | Color | Chemical Compound | Applications | Physical Form | Odor/Scent |
|---|---|---|---|---|---|---|
| Packing Type: Brush-In-Cap | ||||||
| 434-08971 | 8 oz | Silver Gray | Nickel | Thread | Paste | Grease |
| 434-08910 | 10 oz | Copper Gray | Copper | Bolt; Flange; Nut; Spline; Valve | Paste | Oil |
| 434-08907 | 16 oz | Copper Gray | Copper | Bolt; Flange; Nut; Spline; Valve | N/A | Oil |
Blue Moly Compounds
Features:
• Provides excellent protection against extreme pressure and high temperatures.
• Contains no graphite, lead or copper and can be used in applications where these are undesirable or prohibited.
Color: Blue
| SKU | Capacity Wt. | Chemical Compound | Resistance |
|---|---|---|---|
| Packing Type: Brush Top Can | |||
| 535-30850491 | 8 oz | Molybdenum Disulifde | Heat; Corrosion; Rust; Seizure |
| 535-30801134 | 16 oz | Molybdenum Disulfide | Heat; Corrosion; Rust; Seizure |
High Temperature Stainless Lubricating Compounds
Features:
• Excellent resistance to corrosion.
• Prevents seizure at high temperatures.
• Resists galvanic action between dissimilar metals.
• Resists alkaline solutions, chemical and acid vapors, road salt, steam, salt water and iodized water.
Chemical Compound: Stainless Steel; Graphite; Aluminum
Resistance: Heat; Corrosion; Rust; Seizure
Applications: Fasteners in Steel Mills and Power Plants; Stainless Steel Pipe Fittings, Flanges, Pump Fittings and Unions; Fasteners in Exhaust Manifolds; Reactor Bolts; Turbine Bolts; Gauges; Fittings
| SKU | Capacity Wt. | Packing Type | Color |
|---|---|---|---|
| 535-30605603 | 1 lb | Brush Top Can | Silver Gray |
Mariner’s Choice Anti-Seize
Features:
• Extreme pressure lubricant formulated to assure absolute parts protection againstseizure, galling and corrosion in fresh and salt water environments.
• Offers unparalleled resistance to water washout and the best protection in continuous high moisture environments both above and below water lines.
Color: Black-Gray
Chemical Compound: Copper; Graphite; Aluminum
Thickener: Calcium Complex
Resistance: Heat; Corrosion; Rust; Seizure; Salt Water
| SKU | Capacity Wt. | Packing Type |
|---|---|---|
| 535-30803826 | 16 oz | Brush Top Can |
| 535-30803832 | 8 oz | Brush Top Can |
Nickel Nuclear Grade Compounds
Features:
• Excellent heat dispersing qualities.
• Prevents galling on steel-to-stainless, titanium, magnesium and other hard metals.
Color: Silver
Resistance: Heat; Corrosion; Rust; Seizure
Applications: Fittings Exposed to High Temperatures; Stainless Steel Pipe Fittings; Flanges; Pump Fittings; Fasteners in Exhaust Manifolds & Boilers; Steam Generators; Assembly of Dissimiliar Metals
| SKU | Capacity Wt. | Packing Type |
|---|---|---|
| 535-30800825 | 1 lb | Flat Top Can |
| 535-30602948 | 8 oz | Brush Top Can |
Pure Nickel Special Compounds
Features:
• Excellent heat dispersing qualities.
• Prevents galling on steel-to-stainless, titanium, magnesium and other hard metals.
Color: Silver
Chemical Compound: Nickel; Graphite
Resistance: Heat; Corrosion; Rust; Seizure
Applications: Fittings Exposed to High Temperatures; Stainless Steel Pipe Fittings; Flanges; Pump Fittings; Fasteners in Exhaust Manifolds & Boilers; Steam Generators; Assembly of Dissimilar Metals
| SKU | Capacity Wt. | Packing Type |
|---|---|---|
| 535-30803818 | 8 oz | Brush Top Can |
| 535-30801135 | 1 lb | Brush Top Can |
| 535-30803819 | 1 lb | Flat Top Can |
Regular Grade Compounds
Features:
• Protects against rust, corrosion, carbon fusion and seizure at high temperatures.
• Keeps parts working longer with less wear, and enables faster disassembly when repairs are needed.
Resistance: Heat; Corrosion; Rust; Seizure
| SKU | Capacity Wt. | Color | Chemical Compound |
|---|---|---|---|
| Packing Type: Tube | |||
| 535-30840652 | 4 oz | Silver | Copper; Graphite; Aluminum |
| Packing Type: Aerosol Can | |||
| 535-30803827 | 16 oz | Silver | Copper; Graphite; Aluminum |
| Packing Type: Brush Top Can | |||
| 535-30803817 | 1 lb | Silver | Copper; Graphite; Aluminum |
| 535-30803820 | 8 oz | Silver | Copper; Graphite; Aluminum |
| Packing Type: Flat Top Can | |||
| 535-30803804 | 1 lb | Silver | Copper; Graphite; Aluminum |
| 535-30854504 | 8 lb | Silver | Copper; Graphite; Aluminum |
White Food Grade Compound w/PTFE
Features:
• Composed entirely of ingredients which meet FDA requirements.
• It is a virtually odorless, colorless and tasteless multi-purpose lubricant.
Applications: Food Handling Plants; Nuts, Bolts, Screws; Pipe Fittings;
Packaging Machinery; Stainless Steel Fittings; Conveyor and Oven Bearings
| SKU | Capacity Wt. | Color | Resistance |
|---|---|---|---|
| 535-30803822 | 14 oz | White | Heat; Corrosion; Rust; Seizure |
Anti-Seize Lubricants
Features:
• Heavy-duty blend of aluminum, copper and graphite.
• Prevents galling, corrosion and seizing of mated parts.
• Salt, corrosion and moisture resistant.
• Will not evaporate or harden.
Applications: Turbines & Jet Engines; Slow Moving Parts; Exhaust Manifold and Engine Bolts; Anchor Pins and Brake Assemblies; U-Bolts and Spring Bolts
Chemical Compound: Aliphatic Petroleum Distallates; Petroleum Distallates; Calcium Oxide; Aluminum Powder; Graphite; Light Naphthenic Hdrotreated Distillate
| SKU | Capacity Wt. | Color | Resistance |
|---|---|---|---|
| Packing Type: Packing Type | |||
| 230-80208 | 16 oz | Silver | Galling; Siezing; Corrosion |
| 230-80071 | 4 oz | Silver | Galling; Siezing; Corrosion |
| 230-80078 | 8 oz | Silver | Galling; Siezing; Corrosion |
Copper Anti-Seize Lubricants
Features:
• Anti-seize and thread lubricant that may be used to prevent seizing, corrosion and galling where high temperature conditions exists.
• Contains a high percentage of micro-fine copper flakes in a semisynthetic grease carrier.
Chemical Compound: Mineral Oil; Petroleum Distillates; Calcium Oxide; Copper; Graphite; Light Napthenic Hydrotreated Distillate; Lithium Soap Mixture
Applicable Materials: Stainless Steel; Metal Alloys
Applications: Kilns; Oven; Marine Equipment; Farm Equipment; Heavy Equipment; Industrial Equipment; Drawing & Forming of Metals; Threaded Assemblies; Slide Fit Assemblies; Hinges; Gears; Chains & Sprockets; Cables & Sheaves; Lever Pivot Points; Roller
| SKU | Capacity Wt. | Color | Resistance | Physical Form |
|---|---|---|---|---|
| Packing Type: Brush Top Bottle | ||||
| 230-09128 | 8 oz | Copper | Heat; Corrosion | Paste |
| 230-31163 | 16 oz | Copper | Heat; Corrosion | Paste |
Nickel Anti-Seize Lubricants
Features:
• Protects metal parts from seizing and galling.
• Copper-free, use under conditions of extreme pressure and temperature, and with stainless steel, titanium and nickel alloys.
Applications: Drop Forge Dies and Hammers; Catalyst Bed and Reaction Chamber Supports; Slow Rotating Bearings in Hot Corrosive Environments; Pipe Threads in Acid Environments; Coating Gaskets in High Temperatures; Conveyor Cains; Chemical Bolts for Pump Housing and Pipe Flanges
Chemical Compound: Petroleum Distillates; Nickel; Graphite; Aluminum Powder
Applicable Materials: Stainless steel or similar alloys
| SKU | Capacity Wt. | Color | Quantity | Resistance | Physical Form |
|---|---|---|---|---|---|
| Packing Type: Brush Top Bottle | |||||
| 230-77124 | 8 oz | Gray | 12 Per Case | Galling; Corrosion | Paste |
| 230-77164 | 16 oz | Gray | 10 Per Case | Galling; Corrosion | Paste |
Anti-Seize & Lubricants
Features:
• Designed to lubricate and protect metal parts.
• Protective film will not harden, separate or evaporate.
• Can be used to protect against galling, carbon fusion, and galvanic pitting.
Chemical Compound: Synthetic Based
Resistance: Saltwater; Corrosive Process
Applicable Materials: Most Metals
Applications: Threaded Fittings; Sprockets; Worm Gears; Manifold Studs & Bolts; Brake Cams & Pins; Rig Drives; Casting Equipment; Winches; Conveyors; Vavle Shafts; Food Processing Equipment
Quantity: 1 each
| SKU | Capacity Wt. | Color | Physical Form | Odor/Scent |
|---|---|---|---|---|
| 425-TF260201 | 1 gal | Copper Gray | Liquid | Low/Sweet |
Belt Dressings
Belt Dressing Lubricants
Features:
• Colorless—will not stain finished goods transported on conveyor systems.
• Tacky, non-drying, water-resistant film minimizes drive belt slippage, resists water wash-off, maintains belt flexibility and prevents loads from slipping on conveyor systems.
| SKU | Container Size | Capacity Wt |
|---|---|---|
| 125-03065 | 16 oz | 10 oz |
Chain & Cable Lubricants
Chain & Wire Rope Lubricants
Features:
• Resists water wash-off and high-temperature sling off.
• Absorbs pin/bushing shock and cushions rollers, pins and bushing.
• Can be applied with guards in place to eliminate costly downtime.
| SKU | Color | Applicable Materials | Resistance |
|---|---|---|---|
| 125-03050 | Amber | Most Metals | Water |
Extreme Duty Open Gear Chain Lubes
Features:
• A heavy-duty, extreme pressure lubricant recommended for reducing friction & wear in harsh environments.
• It resists heat & pressure, will not wash or wear off because of weather, & will not break down after repeated workings.
Applications: Open gears, chains, cables, wire ropes, quarry and mining equipment, fifth wheels of tractors and trucks, leaf springs, drive chains, screw threads, and flexible couplings
| SKU | Color | Applicable Materials |
|---|---|---|
| 125-03058 | Black | Metal |
Food Grade Chain Lubes
Features:
• No known ozone depleting chemicals.
• Non-drying film.
• Designed to keep roller drive and conveyor chains lubricated.
• Foaming action.
• P-stream button dispenses narrow, forceful stream.
• Reduces friction and wear that causes metal fatigue, including in surface cracks and overhead applications.
• Uses include non-food applications as well as where incidental food contact may occur, including in meat and poultry plants.
Applicable Materials: Most Metals
Applications: Chain; Conveyor; Truck
| SKU | Color | Resistance |
|---|---|---|
| 125-03055 | Amber | Corrosion |
Moly/Oil Open Chain Lubes
Features:
• A high grade lubricating oil that is fortified with molybdenum disulfide to penetrate inaccessible areas.
• Provides superior lubrication where temperature and stress will break down ordinary lubricants.
• Will not wash away or rub off.
• Provides excellent metal penetration.
• Reduces wear and increases chain life.
• Dark gray color allows easy visibility of application.
• Travels deep into wire ropes and exposed gearboxes, and along cabling.
Applications: Lubricates and protect cranes, hoists, saws, conveyors, link and roller assemblies, chain drives and pins, bushings, clippers, cables, gear boxes, forklifts and other chains, cables and wire ropes subject to pressure, stress and extreme temperatures.
| SKU | Color | Resistance | Applicable Materials |
|---|---|---|---|
| 205-7043 | Gray | Corrosion | Metal |
Chain Lubricants Food Grade
Features:
• Excellent for applications involving incidental food contact on food processing equipment.
• Foaming action provides extra penetration and lubrication.
• Oily, wet film extends chain life.
• Nonflammable.
| SKU | Color | Applicable Materials | Applications | Resistance |
|---|---|---|---|---|
| 428-06016 | Clear | Metals | Chains; Bushings; Pins | Water |
ChainMate® Chain & Wire Rope Lubricants
Features:
• Increases chain and wire rope life.
• Effective under extreme temperature and pressure ranges.
• Deep penetration to the core of wire ropes.
• Reduces wear caused by friction and corrosion.
• Lubricant and corrosion protectant.
Applicable Materials: Metals
Applications: Bushings; Cables; Chains; Cranes; Cutting Tools; Drag Lines; Drives; Forklifts
| SKU | Color | Applicable Materials | Metals |
|---|---|---|---|
| 428-02416 | Gray | Metals | Wear; Corrosive Process |
Chain & Cable Fluids
Features:
• Superior penetrating oil.
• A cleansing non-gumming oil.
• Lubricates wire rope, chains, cables, any moving metal surfaces.
• Prevents rust and corrosion.
• Protects bright work, loosens rusty nuts and bolts.
• Ideal for tapping and drilling.
Applications: Cable; Chain; Slide
Resistance: Corrosion; Road Grime; Rust; Salt Water
| SKU | Color | Applicable Materials | Type |
|---|---|---|---|
| 293-L0135-063 | Amber | Metal Surfaces | Penetrating Oil |
Liquid Wrench® Chain Lubes
Features:
• Stays put on moving parts, reduces friction.
• Prevents corrosion, reduces wear, quiets, extends life.
• Anti-sling formula.
• Safe for rubber O-ring and standard chains.
Applications: All chains and wire cable--industrial, farm, cycle and ATV
| SKU | Color | Applicable Materials | Resistance |
|---|---|---|---|
| 615-L7-11 | Light yellow, Amber | Metal; Rubber O-Rings | Corrosion |
LU™ 201 Open Gear & Wire Rope Lubricants
Features:
• Penetrates to core of wire rope, minimizing internal friction.
• “Travels” on metal surfaces, displacing water to provide excellent rust protection.
• Contains no chlorinated solvents or O.D.P.
• Does not rub off.
• Equipped with extension tube.
• Withstands high pressures.
• Does not become brittle or break down while working.
Applications: Cable; Exposed Gears; Gear Boxes; Machine Tools; Metal Forming Presses; Roller Chains; Winches; Wire Rope
Resistance: Water; Wear; Weather
| SKU | Color | Capacity Vol. | Type |
|---|---|---|---|
| 425-SC0201000 | Black | 12 oz | Aerosol Can |
Moly Chain & Pin Bushing Lubes
Features:
• Foaming action penetrates close tolerances of chain drive bushings and pins.
• Reduces wear, increases chain life up to three times when applied regularly.
• Spray-Any-Way valve for application in upright or inverted position.
• Contains no chlorinated solvents or O.D.P.
Applications: Chain Drives & Pins; Link & Roller Assemblies; Machinery; Work Stand Rollers; Conveyors: Sprockets; Clippers; Cutter Bars; Chain Saws
| SKU | Capacity Vol. |
|---|---|
| 425-SC0905000 | 12 oz |
Corrosion Inhibitors
Cold Zinc Galvanizing Primers
Features:
• Zinc rich rust preventative finish for industrial applications.
• For use on galvanized and non-galvanized surfaces.
• No topcoat needed.
Applicable Materials: Metal Surfaces; Galvanized Surfaces
| SKU | Capacity Vol. | Color |
|---|---|---|
| 905-SPRAY-GALV | 13 oz | Gray |
3-36® Multi-Purpose Lubricants & Corrosion Inhibitors
Features:
• Cleans, lubricates, penetrates and loosens corrosion.
• Prevents corrosion by displacing moisture.
• Penetrates through corrosion to loosen frozen parts.
• Lubricates without leaving a sticky residue.
• Cleans light soils and contaminants.
Color: Clear Green
Applicable Materials: Most Metals; Steel; Brass; Aluminum
Applications: Multi-Purpose
Chemical Compound: Petroleum Based
Odor/Scent: Pleasant
Type: Penetrating Oil
| SKU | Capacity Vol. | Packing Type | Wt. |
|---|---|---|---|
| 125-03006 | 1 gal | Bottle | 8 lb |
| 125-03005 | 11 oz | Aerosol Can | 1 lb |
| 125-03007 | 16 oz | Trigger Bottle | 1.33 lb |
| 125-03009 | 5 gal | Pail | 8 lb |
Battery Terminal Protectors
Features:
• Soft, flexible film completely encapsulates exposed surfaces and will not become brittle, crack or peel.
• Red color provides easy visual inspection of application.
• Dries quickly and protects instantly.
Applications: Battery Posts/Terminals; Hold-Downs and Casings in Vehicles, Boats, Handling Equipment, and Uninterrupted Power Supplies (UPS); Computer, Security, and Emergency Back-Up Systems
Type: Anti-Corrosion Coating
| SKU | Capacity Vol. | Color | Chemical Compound |
|---|---|---|---|
| 125-03175 | 12 oz | Dark Red | Petroleum |
Bright Zinc-It® Instant Cold Galvanize
Features:
• Protects base metal even when scratched or abraded.
• Fast-drying, dries to the touch in 15 minutes.
Applicable Materials: Most Metals
Applications: Threads; Exposed Edges; Fasteners; Conduit; Strapping; Welds; Fencing; Railings; Grates; Electrical Poles; Breaker Panel Housings; Rain Spouts; Signs; Doors; Trailers; Waste Containers; Catwalks; Guard Rails
Recommended Film Thickness: 1.5 to 3 mil
| SKU | Capacity Vol. | Color | Chemical Compound | Type |
|---|---|---|---|---|
| 125-18414 | 13 oz | Gray | Zinc | Anti-Corrosion Coating |
SP-350™ Corrosion Inhibitors
Features:
• Displaces moisture and protects all metals with a thin non-drying film.
• Protects equipment and parts in storage, shipment and in process for up to 2 years indoors.
• Promotes easy equipment start-up.
• Convenient 360º spray valve—can be sprayed from any position.
• High pressure lubricant that withstands up to 1,250 lbs of pressure in Falex test method.
Applications: Precision machine surfaces; Protective coating for assemblies in storage or in shipment; Start-up lubricant for stored machinery
Type: Anti-Corrosion Coating
Recommended Film Thickness: 0.2 to 0.3 mil
| SKU | Capacity Vol. | Color | Applicable Materials | Chemical Compound |
|---|---|---|---|---|
| 125-03262 | 11 oz | Translucent | Most Metals | Petroleum Based |
SP-400™ Corrosion Inhibitors
Features:
• Firm, waxy film is highly resistant to humidity and salt spray and never becomes brittle.
• Long term protection (up to 2 years outdoors) for all metals during shipment or extended storage.
Applications: Motors; Shafts; Equipment exposed to the elements; Outdoor storage of raw materials & finished stock
Type: Anti-Corrosion Coating
Recommended Film Thickness: 2 mil
| SKU | Capacity Vol. | Color | Applicable Materials | Chemical Compound |
|---|---|---|---|---|
| 125-03282 | 10 oz | Dark Amber | Most Metals | Petroleum Based |
Zinc-It® Instant Cold Galvanize
Features:
• Actively fights rust and corrosion with a film of 95% pure zinc.
• Protects base metal even when scratched or abraded.
• Fast-drying, dries to the touch in 15 minutes.
• Excellent weldability.
Applications: Threads; Exposed Edges; Fasteners; Conduit; Strapping; Welds; Fencing; Railings; Grates; Electrical Poles; Breaker Panel Housings; Rain Spouts; Signs; Doors; Trailers; Waste Containers; Catwalks; Guard Rails
Type: Anti-Corrosion Coating
Recommended Film Thickness: 2 to 3 mil
| SKU | Capacity Vol. | Color | Applicable Materials | Chemical Compound |
|---|---|---|---|---|
| 125-18412 | 13 oz | Matte | Steel | Acrylic |
Cold Galvanizing Compounds
Features:
• Provides corrosion protection to ferrous metal surfaces.
• Good for welded joints, guard rails, corrugated metal buildings, and refinery pipes.
• Dry time set to touch in 3-5 min., hard dry in 48 hrs.
Applications: Industrial; Aviation; Marine; Manufacturing
Chemical Compound: Zinc
Type: Corrosion Protection
Recommended Film Thickness: 3–4 mils
| SKU | Capacity Vol. | Fill Amount | Packing Type | Color | Applicable Materials | Wt. |
|---|---|---|---|---|---|---|
| 205-7007 | 13 oz | 13 oz | Aerosol Can | Gray | Metal | 1 lb |
| 205-7007Q | 1 qt | 1 qt | Can | Gray | Metal | 6.1 lb |
| 205-7007G | 1 gal | 1 gal | Can | Gray | Metal | 7 lb |
Corrosion Suppressants
Features:
• Provides excellent rust protection for metal parts that must be stored, indoors or outdoors, for long periods of time.
• Does not contain silicone.
• Easily removed with mild soap and water.
• Seals out acid, moisture, air, salt water and other corrosive elements.
| SKU | Capacity Vol. |
|---|---|
| 205-6013 | 10 1/2 oz |
Galva Bright Premium
Features:
• Stops rust and corrosion on any iron or steel surface.
• Zinc-rich formula for long-lasting protection.
• Ready-to-use, the application can be sprayed or brushed on.
Applications: Tools; Steel Stock; Parts; Machinery
Odor/Scent: Hydrocarbon
Type: Rust/Corrosion Prevention
| SKU | Capacity Vol. | Color | Applicable Materials | Chemical Compound |
|---|---|---|---|---|
| 205-7008 | 13 oz | Gray | Steel | Zinc |
Rust Inhibitors
Features:
• Great for indoor storage.
• Absorbs moisture.
• Neutralizes acid formed by corrosive atmosphere.
Applications: Tools; Steel Stock; Parts; Machinery
| SKU | Capacity Vol. | Color | Chemical Compound | Odor/Scent |
|---|---|---|---|---|
| 205-6007 | 11 oz | Light Amber | Lanolin Heptanes | Hydrocarbon |
Spray Galv
Features:
• Zinc rich coating produces sacrificial protection to stop rust and corrosion on all metal surfaces.
• Any deterioration leads to rust and/or corrosion of the coating rather than the metal surface.
Applications: Rust and corrosion protection
Chemical Compound: Zinc; Acetone; Xylene
| SKU | Capacity Vol. | Color | Applicable Materials | Odor/Scent | Type |
|---|---|---|---|---|---|
| 368-309-16 | 13 oz | Silver | Metal | Petroleum | Anti-Corrosion Coating |
Ultra Brand Bright Zinc Galvanizing
Features:
• Produces a hard coat that will stop rust on all metals.
• Contains metallic zinc dust, resin and other additives to provide the look of new galvanizing.
• Equivalent to hot dip galvanizing in cathodic protection, film durability and protection against caustic action salt spray.
• Dries to touch in one hour.
• Produces bright finish.
Applications: Stops Rust and Corrosion on Metal Surfaces
Chemical Compound: Aluminum Dust; Metallic Zinc
Odor/Scent: Chlorinated Solvent Odor
Type: Anti-Corrosion Coating
| SKU | Capacity Vol. | Color | Applicable Materials |
|---|---|---|---|
| 368-DF305-16 | 16 oz | Silver | All Metal Surfaces |
Fluid Film® Powerful Penetrants and Lubricants
Features:
• Penetrant and lubricant also used for corrosion prevention.
• Formulated from specially processed wool-wax, highly refined petroleum oils and selected agents to provide corrosion control, penetration, metal wetting, and water displacement.
• Long-lasting product contains no solvents, will not dry out and will penetrate to the base of all metals.
| SKU | Capacity Vol. | Physical Form | Packing Type |
|---|---|---|---|
| 275-NAS-1 | 1 gal | Liquid | Can |
| 275-NAS-5 | 5 gal | Liquid | Pail |
Fluid Film® Preventive & Lubricants
Features:
• Is a lanolin based rust/corrosion preventive and lubricant that provides long term protection and lubrication for all metal surfaces.
• Locks out and displaces moisture while lubricating moving parts for extended periods of time.
Applications: Bolts; Cables; Chains; Firearms; Hedge Trimmers; Hinges; Locks; Metal Moving Parts; Mower Decks; Nuts; Rollers; Shafts; Sliders; Snow Equipment; Tools; Valves
Type: Anti-Corrosion Coating
| SKU | Capacity Vol. | Color | Applicable Materials | Chemical Compound | Odor/Scent |
|---|---|---|---|---|---|
| 275-AS11 | 11 3/4 oz | Straw | All Metal Surfaces | Petroleum Oil | Piney |
Cold Galvanize Corrosion Inhibitors
Features:
• 95% zinc-rich galvanized coating.
• Works as a hot dip on ferrous metals indoors and out.
• Withstands water temperature up to 212° F (100° C) and continuous dry heat up to 750° F (400° C).
• Flexible coating will not yellow, chalk, crack, or peel.
• Electrochemically protects bare metal.
• Dries in 3 - 5 minutes.
Odor/Scent: Aromatic
Type: Anti-Corrosion Coating
Recommended Film Thickness: 3 mils (Wet); 1.5 mils (Dry)
| SKU | Capacity Vol. | Applicable Materials | Applications | Chemical Compound |
|---|---|---|---|---|
| 428-00516 | 14 oz | Metals | Anti-Corrosion | Zinc |
LPS 3® Premier Rust Inhibitors
Features:
• Protects steel against rust and corrosion for up to 2 years (Indoor storage.
• 9 months outdoor storage).
• Penetrates to displace moisture.
• Resists moisture, sand, dirt, dust and vibration.
• Does not contain chlorinated solvents or silicone.
• Non-staining.
• Safe on most surfaces.
Color: Brown
Applicable Materials: All Metals
Odor/Scent: Mild Cherry
Type: Anti-Corrosion Coating
| SKU | Capacity Vol. | Packing Type | Chemical Compound | Recommended Film Thickness | Wt. |
|---|---|---|---|---|---|
| Applications: Anti-Corrosion | |||||
| 428-00316 | 11 oz | Aerosol Can | Petroleum | 3 to 7 mil (Wet); 1 to 3 mil (Dry) | 0.69 lb |
| 428-00322 | 22 oz | Trigger Spray Bottle | Petroleum Distillates | 3 - 7 mils (Wet); 1 -3 mils (Dry) | 1.25 lb |
| 428-03128 | 1 gal | Container | Petroleum Distillates | 3 to 7 mil (Wet); 1 to 3 mil (Dry) | 8.04 lb |
| 428-00305 | 5 gal | Pail | Petroleum Distillates | 3 to 7 mil (Wet); 1 to 3 mil (Dry) | 7.4 lb |
| Applications: Air Plane Fuselages; Battery Terminals; Cables; Chains and Pulleys; Cargo Sections; Elevators; Interior Sections of Vehicle Doors; Metal Parts; Offshore Drilling Equipment; Outdoor Storage and Shipments; Pumps and Hose Assemblies |
|||||
| 428-00316 | 11 oz | Aerosol Can | Petroleum | 3 to 7 mil (Wet); 1 to 3 mil (Dry) | 0.69 lb |
High Performance V2100 System Galvanizing Compounds
Features:
• Excellent adhesion to galvanized metal.
• Maximum corrosion protection.
• Withstands mild chemical fumes and spills.
• Contains up to 93% pure zinc in the dry film for ultimate galvanic protection.
• Fast dry - less than 30 minutes.
• Protects in moderate to extreme environments.
Applicable Materials: Galvanized Steel
Applications: Bare Sheet Metal; Production Welds; Galavanized Ducts; Storage Tanks; Fences
Chemical Compound: Zinc
Odor/Scent: Solvent-Like
| SKU | Capacity Vol. | Color | Type |
|---|---|---|---|
| 647-V2117838 | 20 oz | Bright Silver | Bright |
| 647-V2185838 | 20 oz | Gray | Cold |
Industrial Choice 1600 System Galvanizing Compounds
Features:
• Contains a high zinc content in the dry film for ultimate galvanic protection.
• Excellent corrosion protection.
• Withstands mild chemical fumes and spills.
• Great adhesion to galvanized metal.
Applications: Bare Sheet Metal; Production Welds; Galavanized Ducts; Storage Tanks; Fences
Type: Cold Galvanizing
Recommended Film Thickness: 1–2 mils
| SKU | Capacity Vol. | Chemical Compound | Odor/Scent |
|---|---|---|---|
| 647-1685830 | 14 oz | Alkyd | Solvent |
Silver Galv Coatings
Features:
• Produces a dry coating with the bright finish of hot-dip galvanizing.
• Recommended dry film thickness of 1.5 to 3.0 mils.
• 400 °F dry heat and 100 °F wet heat (non-immersion) resistance.
• Resists aromatic hydrocarbon solvents and chlorinated solvents.
Applications: Inhibits rust and corrosion
Type: Anti-Corrosion Coating
Recommended Film Thickness: 1.5 - 3 mil
| SKU | Capacity Vol. | Color | Applicable Materials | Chemical Compound |
|---|---|---|---|---|
| 425-SC0739000 | 14 oz | Silver | Iron; Steel | Alkyd |
Zinc-Rich Cold Galvanizing Compounds
Features:
• Fast-drying, high-solids, high performance, epoxy-based coating.
• Provides maximum protection to steel exposed to severe corrosive environments.
• Anti-sag and anti-settling properties.
Applicable Materials: Most Metals; Steel
Applications: Automotive; Marine Facilities; Nuclear Facilities; Power Plants; Refineries; Industrial Tanks; Welding Joints; Bridges; Farm Equipment; Fencing; Transmission Towers
Chemical Compound: Propane; Butane; Heptane; Light Aliphatic Hydrocarbon Solvent; Toluene; Methyl Ethyl Ketone; Zinc
| SKU | Capacity Vol. | Color | Recommended Film Thickness |
|---|---|---|---|
| 425-SC0740000 | 14 oz | Gray | 1-2.5 mils wet |
Bloxide° Rust Preventive Weldable Coatings
Features:
• Prevents rust formation even after extended period of storage in open yards.
• Ease of striking the arc directly on the coating-need no removal/cleaning prior to welding.
• Being aluminum based, it ensures x-ray quality weld as aluminum acts as a scavenger.
• Does not create hazardous fumes or odor upon welding on the coating.
Applications: Marine and offshore fabrication; almost all steels; paint and coating primer
Recommended Film Thickness: Wet: 3 mil; Dry: 0.75 mil
| SKU | Capacity Vol. | Color | Applicable Materials | Type |
|---|---|---|---|---|
| 719-BLAR | 12 oz | Silver | Steel | Weldable Primer Coating |
1st® Zinc Primers
Features:
• +95% zinc-rich compound.
• Weld-thru primer, can be top-coated.
Applicable Materials: Parts; Assemblies
| SKU | Capacity Vol. | Color |
|---|---|---|
| 388-FZ-100 | 16 oz | Gray |
Brite® Zinc Cold Galv
Features:
• Repair damaged or welded galvanizing.
• Weld-thru, fast dry, meets ASTM A780.
• Brite silver, matches hot-dip.
Applicable Materials: Galvanized Steel
Chemical Compound: Zinc-Rich
Type: Rust/Corrosion Prevention
Recommended Film Thickness: 1 mil
| SKU | Capacity Vol. | Packing Type | Color | Odor/Scent | Wt. |
|---|---|---|---|---|---|
| Applications: Rust and Corrosion Prevention | |||||
| 388-B-100 | 12 1/2 oz | Aerosol Can | Clear | Solvent | 1.69 lb |
| 388-B-200 | 1 gal | Can | Silver | Sweet | 12 lb |
Drill Collar & Tool Joint Compounds
Kopr-Kote® Oilfield Drill Collar and Tool Joint Compound
Features:
• Premium-quality, unleaded compound containing copper flake, graphite, and other natural extreme pressure and anti-wear additives.
• Full hydraulic joint efficiency is maintained allowing joint shoulder faces to mate completely without standoff or deformation.
Thickener: Aluminum Complex
Color: Copper
Applicable Materials: Steel
| SKU | Capacity Vol. | Chemical Compound |
|---|---|---|
| 399-10123 | 1 gal | Petroleum Based |
| 399-10115 | 5 gal | Petroleum Based |
Dry Lubes
Air Tool Lubricants
Features:
• Designed to restore and prolong air tool life by cleaning, coating and lubricating tools.
• Breaks loose deposits that accumulate over time in air tools.
• Inhibits rust.
• RPM’s return to peak efficiencies.
| SKU | Capacity Vol. | Type | Color | Applicable Materials |
|---|---|---|---|---|
| 108-16-ATL | 16 oz | Petroleum | Clear | Air Tools |
Dry Lube with Teflon
Features:
• Teflon™ Fluoropolymer helps Reduce Friction & Wear.
• Enhance Performance.
• Protect Surfaces.
| SKU | Capacity Vol. | Type | Color | Applicable Materials |
|---|---|---|---|---|
| 108-16-TDL | 9.3 oz | Dry PTFE Lubricant | Clear | Metals |
Garage Door Lubricants
Features:
• Leaves a dry, tack-free film that won’t accumulate dust and dirt.
• Suitable replacement for grease.
Applicable Materials: Acrylics; Elastomers; Epoxies; Mold Plastics; Nylons; Phenolics; Polycarbonates; Polystyrene; Resins; Rubbers; Urethanes; Chain Drives; Drive Belts and Gaskets; Gears; Metal Working; Wire and Cable
| SKU | Capacity Vol. | Type | Color |
|---|---|---|---|
| 108-16-GDL | 9.3 oz | Silicone Lubricant | Clear |
Dry Moly Lubricants
Features:
• High anti-friction and anti-seizure properties.
• Lubricant resists high temperatures, high pressure, water and chemical attack.
• Fast drying film resists dirt and dust build-up.
Applicable Materials: Most Metals; Rubber; Plastic
| SKU | Capacity Vol. | Type | Color |
|---|---|---|---|
| 125-03084 | 11 oz | Moly Dry Film | Dark |
Dry Film Lubricants
Features:
• Ideal whenever silicone products are not acceptable, and higher temperatures or pressure performance is required.
• Reduces clean-up labor time and costs.
• Safe for rubber, wood, and metals.
Applicable Materials: Rubber; Wood; Metals; Glass
| SKU | Capacity Vol. | Container Size | Color |
|---|---|---|---|
| 205-6075 | 11 oz | 16 oz | Light Milky |
Dry Graphite
Features:
• Forms a super slippery, non-staining film.
• Non-corrosive.
• Non-flaking.
Applicable Materials: Metals
| SKU | Capacity Vol. | Type | Color | Applicable Materials |
|---|---|---|---|---|
| 205-8078 | 12 oz | Dry Graphite Lubricant | Black | Metals |
Dry Moly Lubricants
Features:
• Withstands extreme temperature and pressure.
• Contains no oils or moisture-based diluents.
• Quick drying.
• Tight adhesion.
| SKU | Capacity Vol. | Type | Applicable Materials |
|---|---|---|---|
| 205-6080 | 11.6 oz | Dry Moly Lubricant | Metals; Rubber |
Moly-Mist™ Dry Film Lubricants
Features:
• Non-flammable.
• Prevents galling.
• Reduces torque.
Applicable Materials: Glass; Iron; Most Metals; Plastic; Rubber; Wood
| SKU | Capacity Vol. | Type | Color |
|---|---|---|---|
| 399-16041 | 12 oz | Moly Dry Film | Black |
Dry Film Silicone Lubricants
Features:
• Dry, thin film won’t attract dust or dirt.
• Provides excellent lubrication.
• Ideal for releasing molded parts.
• Does not contain silicone or chlorinated solvents.
| SKU | Capacity Vol. | Type | Color | Applicable Materials |
|---|---|---|---|---|
| 428-01616 | 12 oz | Mold Release Silicone | Clear | Rubber; Wood; Glass; Metal; Plastic |
| 428-02616 | 12 oz | Mold Release Silicone | White | Plastic; Metal; Rubber |
Force 842°® Dry Moly Lubricants
Features:
• Fortified with molybdenum disulfide.
• Provides a quick‑drying, thin film.
• For assembly and break‑in lubrication.
| SKU | Capacity Vol. | Container Size | Type | Odor/Scent |
|---|---|---|---|---|
| 428-02516 | 11 oz | 16 oz | Moly Dry Film | Characteristic |
Dry Film Graphite Lubricants
Features:
• Dries rapidly.
• Reduces friction and wear.
• High temperature.
| SKU | Capacity Vol. | Type | Color | Applicable Materials | Odor/Scent |
|---|---|---|---|---|---|
| 425-SC0204000 | 10 oz | Dry Lubricant | Black | Metals | Mild Solvent |
Dry Moly Lubricants
Features:
• Penetrates pores of substrate and bonds to surface for long‑lasting lubrication.
• Withstands high pressures up to 50,000 psi.
• Contains no chlorinated solvents or O.D.P.
• Air dries in 5‑to‑10 minutes, cures in 2 hours at room temperature.
Applicable Materials: Assemblies; Gaskets; Tumbler Locks; Chutes & Bins; Chain Drives
| SKU | Capacity Vol. | Container Size | Type | Odor/Scent |
|---|---|---|---|---|
| 425-SC0200000 | 11 oz. | 16 oz | Dry | Mild Solvent |
T.F.E. Dry Lubes
Features:
• Dry, non‑oily, non‑staining lubricant with DuPont Krytox®.
• Extremely low static coefficient of friction (.02 to .04).
• Excellent for use in textile industries.
Applicable Materials: Most Metals; Fabric; Glass; Plastic
| SKU | Capacity Vol. | Type | Color | Odor/Scent |
|---|---|---|---|---|
| 425-S00708000 | 10 oz | Dry Lubricant | White | Mild Solvent |
Specialist Dirt & Dust Resistant Dry Lube Spray
Features:
• Quick‑drying lubrication spray resists dirt, dust, and oil.
• Helps reduce friction and wear on power tools and equipment.
• Offers superior corrosion protection with no oily residue.
Type: Dry Lube PTFE Spray
Applicable Materials: Wood; Glass; Fabric; Metal; Leather; Most Plastics
| SKU | Capacity Vol. | Type | Color | Odor/Scent |
|---|---|---|---|---|
| 780-300059 | 10 oz | Dry Lube PTFE Spray | Clear | Pleasant |
Fluids
TrueTap® Foamy Cutting Fluids
Features:
• Foaming action coats tooling.
• Leaves no residue.
| SKU | Container Size | Applicable Materials |
|---|---|---|
| 125-03410 | 16 oz | Aluminum; Iron; Most Metals; Nickel; Stainless Steel; Steel; Titanium |
TrueTap® Heavy-Duty Cutting Fluids
Features:
• Heavy-duty cutting fluid designed for use in severe applications.
• Thick, honey‑like fluid clings to cutting tool throughout the operation.
• Excellent for use on tough stainless steel and exotic metals.
| SKU | Container Size | Applicable Materials |
|---|---|---|
| 125-03400 | 16 oz | Exotic Metals; Stainless Steel |
Cutting Oils
Features:
• Protects both tools and machined parts against rust and oxidation while providing maximum lubricity for ferrous and non‑ferrous machining.
• Coolant and a lubricant for deep drawing, forming, grinding and cutting.
| SKU | Container Size | Packing Type |
|---|---|---|
| 205-7020 | 16 oz | Aerosol Can |
Water Dilutable Cutting Fluid
Features:
• Oil-free synthetic formula maintains integrity under high pressures.
• Contributes to prolonged tool wear and quality finishes.
• Cools and lubricates machine operations minimizing heat distortion and reduces abrasive wear.
• Inhibits against rusting of parts and will not gum or clog coolant lines.
| SKU | Container Size | Applicable Materials |
|---|---|---|
| 368-372-4X1 | 1 gal | Aluminum; Brass; Bronze; Cast Iron; Copper; Stainless Steel; Steel |
Band-Ade® Semi-Synthetic Sawing Fluids
Features:
• Put a Band‑Ade® on your machinery, with a semi‑synthetic sawing fluid that reduces machine wear and improves band saw blade tool life.
• Water‑soluble formulation helps to reduce frictional heat and improves cutting performance.
• Faster cutting and reduced machine wear increases efficiency.
| SKU | Container Size | Packing Type |
|---|---|---|
| Applicable Materials: Ferrous Metals; Non-Ferrous Metals | ||
| 433-68004 | 1 gal | Bottle |
| 433-68003 | 5 gal | Pail |
Lube Tube Stick Band Saw Lubricants
Features:
• Prevents the build‑up of frictional heat.
• Improves overall tool life and productivity when sawing, drilling, milling, grinding, threading, and tapping.
• Works well on abrasives ‑ belts, sanding discs, and pads.
| SKU | Container Size | Applicable Materials |
|---|---|---|
| 433-68020LNX | 14.5 oz | Aluminum Gates and Risers; Ferrous and Non-Ferrous Metals; Plates and Extrusions |
Tapmatic® #1 Gold Cutting Fluids
Features:
• Excellent for steel and aluminum.
• For low speed, high pressure applications.
• Does not contain chlorinated paraffins, water, solvents, or inactive fillers.
| SKU | Container Size | Packing Type |
|---|---|---|
| Applicable Materials: All Metals | ||
| 428-40312 | 11 wt oz | Aerosol Can |
| 428-40320 | 16 fl oz | Bottle |
Tapmatic® AquaCut Cutting Fluids
Features:
• Water‑based formula.
• Excellent in applications where cooling of the tool is desired.
• Does not contain sulfur, chlorine, or oils.
• Excellent in applications where cooling of the tool is desired.
| SKU | Container Size | Applicable Materials |
|---|---|---|
| 428-01216 | 16 oz | All Metals Except Magnesium |
Tapmatic® Edge Creme Cutting Fluids
Features:
• Excellent for vertical applications.
• Biodegradable.
• Apply to cutting tools before tapping or reaming.
• Does not contain any hazardous chemicals.
• For use when drilling, tapping blind holes, forming, bending, pre‑coating fasteners and lubricating rubber seals.
| SKU | Container Size | Applicable Materials |
|---|---|---|
| 428-43100 | 10 oz | All Metals |
Tapmatic® Edge Lube Cutting Fluids
Features:
• White solid waxy bar.
• Excellent for belt, wheel, or disc grinding, and sawing applications.
• Eliminates heat build‑up and belt loading.
• Does not contain any hazardous chemicals.
| SKU | Container Size | Applicable Materials |
|---|---|---|
| 428-43200 | 13 oz | All Metals |
Tapmatic® Natural Cutting Fluids
Features:
• Does not contain sulfur, chlorine, chlorinated solvents, water, mineral oil, or inactive fillers.
• Great for steel and aluminum.
• High performance lubricating ability eliminates galling and seizing.
| SKU | Container Size | Applicable Materials |
|---|---|---|
| 428-44220 | 16 oz | All Metals |
Tapmatic® TriCut Cutting Fluids
Features:
• Excellent on stainless steel and other hard to machine metals.
• Suitable for most metals except aluminum.
• Provides smooth, accurate cutting action.
• Flows directly to cutting edge.
| SKU | Container Size | Applicable Materials |
|---|---|---|
| 428-05316 | 16 oz | Most Metals; Not Recommended for Aluminum |
Hawg Wash® Cutting Fluids
Features:
• Hawg Wash is a water-soluble chemical fluid concentrate containing stable sulphur and chlorine additives.
• It is very efficient due to its combination of high cooling and strong lubricating characteristics.
| SKU | Container Size |
|---|---|
| 495-49-32-0081 | 16 oz |
Rapid Tap™ Metal Cutting Fluids
Features:
• Greatly extends tool life.
• Super‑fine machined finish in operation after operation.
• Excels in tough materials.
• Contains no 1,1,1‑trichloroethane or other ozone‑depleting chemicals.
| SKU | Container Size | Packing Type |
|---|---|---|
| 618-RAPTAP-04NEW | 4 oz | Plastic Bottle |
| 618-RAPTAP-PTNEW | 1 Pint | N/A |
| 618-01G-NRT | 1 gal | Plastic Jug |
Aluminum
Features:
• Use for any and all cutting operations on aluminum.
• Yields a beautiful micro‑fine finish.
• Ozone‑friendly and completely free of 1,1,1 trichloroethane.
• Dissipates heat rapidly and provides closer tolerances.
• Also highly effective on magnesium and other nonferrous metals.
| SKU | Container Size | Packing Type |
|---|---|---|
| 702-20016A | 16 oz | Can w/Spout |
| 702-20128A | 1 gal | Can |
ProTap
Features:
• Our original biodegradable cutting fluid.
• Totally free of all regulated chemicals.
• Highly effective for all cutting operations on all metals.
| SKU | Container Size | Packing Type |
|---|---|---|
| 702-30004P | 4 oz | Can w/Spout |
| 702-30012PL | 12 oz | Aerosol Can |
| 702-30016P | 16 oz | Can w/Spout |
| 702-30128P | 1 gal | Can |
W/EP-Xtra®
Features:
• Outstanding performance for any cutting operation on any metal.
• Absolutely without equal on hard metals and on cuts requiring extreme pressure or long cutting times.
| SKU | Container Size | Packing Type |
|---|---|---|
| 702-10004E | 4 oz | Can w/Spout |
| 702-10012EL | 12 oz | Aerosol Can |
| 702-10016E | 16 oz | Plastic Bottle |
| 702-10128E | 1 gal | Can |
| 702-10640E | 5 gal | Can |
XTRA-THICK® Cutting Fluids
Features:
• Extreme performance for hard metals.
• Virtually eliminates work hardening.
• Single application stays with tool for cuts with long duration—all the way to the bottom of most holes.
| SKU | Container Size | Applicable Materials |
|---|---|---|
| 702-70016T | 16 oz | Inconel; Pipe Threading; Stainless; Titanium |
Jump Start™ Starting Fluid with Lubricity
Features:
• Assures fast, economical starts in extremely cold or humid climates.
• Upper cylinder lubricant minimizes wear during cold starts.
• Effective to ‑65 °F.
• For diesel and gasoline engines.
| SKU | Container Size | Applications | Odor/Scent |
|---|---|---|---|
| 125-05671 | 16 oz | Engine | Ether |
Grease
White Lithium Grease
Features:
• High performance formula lubricates in extreme temperatures.
• Blaster white lithium grease is low‑odor, clean, white grease that lubricates by creating a protective barrier.
• It protects against moisture and oxidation and is safe for a wide range of applications.
Applications: Pen Lube Points, High Load Applications Including Gears, Shafts, Heavy-Duty Chaings, Axles, Bearings, Fan Motors, couplings, Automotive Hinges, Heavy Machinery, Conveyor Belts, Chains, Mechanical Mechanisms, Non Disc Brake Parts, Springs, Plumbing Fixture
| SKU | Capacity Vol. | Color | Thickener |
|---|---|---|---|
| 108-16-LG | 11 oz | White | Lithium |
Di-Electric Grease
Features:
• Improves electrical performance during adverse conditions such as rain, fog, salt spray and temperature extremes.
• Excellent lubricant for rubber and plastic parts.
Resistance: Water; Weather
| SKU | Capacity Vol. | Packing Type | Color | Odor/Scent | Thickener |
|---|---|---|---|---|---|
| Applicable Materials: Most Metals; Plastic; Rubber | |||||
| 125-03082 | 16 oz | Aerosol Can | Translucent | Solvent | Silicone |
| 125-02085 | 3.3 oz | Tube | Opaque White | Mild | Silicone |
Driller Red Grease
Features:
• Offers superior protection to lubricate a wide variety of severe duty drilling, industrial, mining and construction equipment.
• A hi‑temp and extreme pressure premium lithium complex.
• Remove with a degreaser.
Applicable Materials: Backing Plates; Ball Joints; Chassis Points; Construction Ball & Roller Bearings; Idler Bearings; Industrial Applications; Pillow Block Bearings; Sprocket Bearings; U‑joints; Water Pumps; Wheel Bearings
Applications: Drilling, Mining and Construction Equipment
| SKU | Capacity Wt. | Color | Thickener | Odor/Scent | Resistance |
|---|---|---|---|---|---|
| 125-SL3640 | 14 oz | Red | Lithium Complex | Mild Petroleum | Pressure; Water |
Extreme Pressure Moly-Graph® Multi-Purpose Grease
Features:
• Lithium complex, NLGI #2 grease.
• “Moly” and graphite help establish a fine micron plating on all working surfaces.
• Maintains 40 lb Timken OK Load.
• Typical drop point: 380 °F.
Applicable Materials: Most Metals
Applications: Multi‑Purpose
Resistance: Wear; Rust; Corrosion
Quantity: 10 per case
| SKU | Capacity Vol. | Color | Thickener | Odor/Scent |
|---|---|---|---|---|
| 125-SL3330 | 14 oz | Gray | Lithium Complex | Petroleum |
Lithium General Purpose Grease
Features:
• Lithium base, NLGI #2 grease.
• Extremely stable, designed for light duty applications.
• Excellent water resistance.
• Typical drop point: 380º F.
• Contains Rust & Oxidation Inhibitors.
Applicable Materials: Most Metals
Applications: Multi‑Purpose
Resistance: Heat; Water
| SKU | Capacity Wt. | Color | Thickener | Odor/Scent |
|---|---|---|---|---|
| 125-SL3310 | 14 oz | Amber | Lithium | Petroleum |
Red Grease
Features:
• For heavy-duty use, including under extreme pressure, to reduce wear, galling, and scarring.
• Long-lasting.
• Smooth texture.
• Thick.
Applicable Materials: Most Metals
Applications: General Purpose
Resistance: Acid; Alkali; Corrosive Process; Oxidation; Salt; Steam; Water; Weather
Quantity: 12 per case
| SKU | Capacity Vol. | Color | Thickener | Odor/Scent |
|---|---|---|---|---|
| 125-03079 | 11 oz | Red | Aluminum Complex | Solvent |
Sta-Plex™ Grease
Features:
• Extremely versatile lithium complex, NLGI #2 grease with excellent high temperature lubrication.
• Protects against rust and oxidation.
• Maintains 60 lb Timken OK Load.
• Typical drop point: 500º F.
Applicable Materials: Metal; Plastic Molding
Applications: IndustrIal; Automotive; Agricultural
Resistance: Corrosive Process; Wear
| SKU | Capacity Wt. | Color | Thickener | Odor/Scent |
|---|---|---|---|---|
| 125-SL3190 | 14 oz | Red | Lithium | Mild Petroleum |
Super White® Multi-Purpose Grease
Features:
• Lithium base, NLGI #1.5 grease.
• Contains anti‑wear and anti‑friction additives.
• Excellent water resistance.
• Typical drop point: 380º F.
Applications: Multi‑Purpose
Resistance: Water; Wear
| SKU | Capacity Vol. | Packing Type | Color | Thickener | Odor/Scent |
|---|---|---|---|---|---|
| 125-SL3150 | 14 oz | Cartridge | White | Lithium | Mild Petroleum |
| 125-SL3155 | — | Pail | White | Lithium |
White Lithium Grease
Features:
• Excellent heat and water resistance.
• Rust and oxidation inhibitors for superior metal protection.
• Smooth, buttery consistency provides optimum surface coverage.
• Produces a tough, high viscosity film.
• White color allows for easy visual inspection of film coverage.
Applicable Materials: Most Metals
Applications: Multi-purpose
Resistance: Heat; Water
| SKU | Capacity Vol. | Color | Thickener | Odor/Scent |
|---|---|---|---|---|
| 125-03080 | 10 oz | Off‑White | Lithium | Solvent |
Heavy Duty Open Gear & Wire Rope Lubes
Features:
• A high‑grade moly grease that won’t become brittle, is not affected by weather, and has outstanding adhesion properties.
• Minimizes internal friction.
• Withstands extreme pressures with maximum adhesion.
• Displaces water to provide excellent rust and corrosion protection.
• Prevents metal bearing surfaces from becoming crazed and brittle.
• Withstands wash downs.
• migrates on metal surfaces to the core of wire rope and spring windings.
Applicable Materials: Metal; Wire Rope
Applications: Drive Chains; Open Gears; Screw Threads; Die‑Set Leader Pins
Resistance: Rust; Corrosion
Quantity: 12 per case
| SKU | Capacity Vol. | Color | Thickener | Odor/Scent |
|---|---|---|---|---|
| 205-7045 | 12 oz | Black | Oxidized Asphalt | Hydrocarbon |
Alco-Ep-73 Plus™ Extreme Service Multi-Purpose Grease
Features:
• High strength fluid film.
• Extreme resistance to rust & corrosion.
• Strong adhesion properties.
| SKU | Capacity Vol. | Color | Thickener | Resistance |
|---|---|---|---|---|
| 399-37750 | 14 oz | Red | Aluminum Complex | Corrosive Process; Water; Wear |
AP-1™ Hi-Temp Multi-Purpose Grease
Features:
• For general purpose lubrication of plain and anti‑friction bearings.
• Nonmelting, water‑resistant grease.
• Excellent work stability under high loads, shock, and vibration.
Applicable Materials: Metals
Applications: General Purpose Lubrication of Plain and Anti‑Friction Bearings
Resistance: Corrosive Process; Water; Wear
Quantity: 30 Cartridges per Case
| SKU | Capacity Wt. | Color | Thickener | Odor/Scent |
|---|---|---|---|---|
| 399-31550 | 14 oz | Amber | Organo Clay | Mild Petroleum Scent |
Silicone DM™ Dielectric Grease
Features:
• Excellent for high temperature bearings, conveyor systems, and low‑temp refrigeration systems.
• Water-Resistant.
• Nontoxic/Safe.
• Extremely chemical resistant.
• Highly resistant to oxidation and shear breakdown.
• Dielectric strength: 500 volts/mil typical.
Odor/Scent: Odorless
Applicable Materials: Metals
Applications: Multi-Purpose
Resistance: Water
| SKU | Capacity Vol. | Color | Thickener | Odor/Scent |
|---|---|---|---|---|
| 399-73560 | 5.3 oz | White | Inorganic | Inorganic |
White Lithium Grease w/PTFE
Features:
• Cam and equipment assembly grease withstands heavy loads and high speeds while preventing rust and corrosion.
• Excellent for use in home, shop, plant and auto.
Applications: Multi-Purpose
Resistance: Corrosive Process; Heat; Water
| SKU | Capacity Wt. | Color | Thickener | Odor/Scent | Applicable Materials |
|---|---|---|---|---|---|
| 399-50350 | 14 oz | White | Lithium | Grease‑Like | Most Metals |
Red and Redi Multi-Purpose Red Grease
Features:
• Delivers excellent lubrication.
• Prevents rust, corrosion and oxidation.
• Red color allows easy visual inspection.
• Remains effective at extremely high temperatures.
• Penetrates quickly.
• Reduces friction and vibration.
• Resists shock.
Applicable Materials: Metals
Applications: Multi-Purpose
Resistance: Rust; Corrosion; Oxidation
Quantity: 1 each
| SKU | Capacity Vol. | Color | Thickener | Odor/Scent |
|---|---|---|---|---|
| 428-05816 | 11 oz | Red | Bentone Clay | Faint Solvent |
ThermaPlex® Aqua Bearing Grease
Features:
• Excellent resistance to fresh and salt water.
• Resists water washout.
• Good adhesion properties.
• Excellent corrosion resistance.
• Significant load carrying capability.
Applicable Materials: Metals
Applications: Bearing
Resistance: Water; Salt Corrosive Process; Water
Quantity: 1 each
| SKU | Capacity Vol. | Color | Thickener | Odor/Scent |
|---|---|---|---|---|
| 428-70514 | 14.1 oz | Amber | Aluminum | Petroleum |
ThermaPlex® FoodLube Bearing Grease
Features:
• Uses only FDA ingredients.
• Ensures safety in areas where incidental contact with food can occur.
• High degree of water resistance.
• Excellent corrosion protection.
• Very good load capacity.
| SKU | Capacity Vol. | Color | Odor/Scent | Applications | Resistance |
|---|---|---|---|---|---|
| 428-70114 | 14.1 oz | White | Hydrocarbon | Bearing | Corrosive Process; Water |
ThermaPlex® Hi-Temp Bearing Grease
Features:
• Reduces risk of bearing failure at high temps.
• Excellent high temperature performance.
• Resists carbonization at high temperatures.
• Extends relubrication intervals.
• Very high dropping point.
• Ensures optimal production rates.
Applications: Bearing
Resistance: Impact
Quantity: 1 each
| SKU | Capacity Vol. | Color | Thickener | Odor/Scent | Applicable Materials | Applications |
|---|---|---|---|---|---|---|
| 428-70214 | 14.1 oz | Dark Brown | Aluminum | Petroleum | Metals | Bearing |
ThermaPlex® Multi-Purpose Bearing Grease
Features:
• Excellent load carrying properties.
• Extends re‑lubrication periods.
• Prolongs bearing life.
• Good corrosion resistance.
Resistance: Corrosive Process
Quantity: 1 each
| SKU | Capacity Vol. | Color | Thickener | Odor/Scent | Applicable Materials | Applications |
|---|---|---|---|---|---|---|
| 428-70614 | 14.1 oz | Blue | Lithium | Petroleum | Metals | Bearing |
White Lithium Multi-Purpose Grease
Features:
• Does not contain any chlorinated solvents.
• Produces a long-lasting, protective film against rust and corrosion.
• PTFE additives for superior lubrication.
• Rapidly forms into a pure white grease.
Resistance: Water; Rust
Quantity: 1 each
| SKU | Capacity Vol. | Thickener | Odor/Scent | Applicable Materials | Applications |
|---|---|---|---|---|---|
| 428-03816 | 10 oz | Lithium | Mild | Metals | Multi‑Purpose |
1240 Series Multi-Purpose Grease
Features:
• Highly water-resistant and tacky, designed for applications where the grease is subjected to heavy pressure and shock loads.
• Lithium complex soap with mineral oil and additives.
Applicable Materials: For Applications Where Grease is Subjected to Heavy Pressure and Shock Loads
Applications: Multi-Purpose
Resistance: Corrosive Process; Water
| SKU | Capacity Wt. | Color | Thickener | Odor/Scent |
|---|---|---|---|---|
| 293-L0106-098 | 14 1/2 oz | Off‑White | Lithium Polymer | Mineral Oil |
630 Series Multi-Purpose Grease
Features:
• High film strength, exceptional resistance to water, steam and other adverse conditions.
• Available in 4 NLGI densities for a variety of applications.
Thickener: Lithium
Odor/Scent: Mineral Oil
Applicable Materials: Metals
Applications: Multi-Purpose
| SKU | Capacity Wt. | Packing Type | Color | Resistance | Quantity |
|---|---|---|---|---|---|
| 293-L0067-092 | 10 oz | Tube | Tan | Water | 36 per carton |
| 293-L0072-098 | 14 1/2 oz | Cartridge | Tan | Water | 40 per carton |
| 293-L0067-004 | 16 oz | Tub | Off-White | Chemical; Water | 1 each |
| 293-L0067-035 | 35 lb | Pail | Tan | Water | 1 each |
930 Series Multi-Purpose Greases
Features:
• Listed as multi-purpose but with a higher operating temperature range than the 630 Series.
• High film strength and exceptional resistance to water, steam and other adverse operating conditions.
• Shear stable multi-purpose greases for both plain and anti‑friction bearings.
Odor/Scent: Mineral Oil
| SKU | Capacity Vol. | Packing Type | Color | Applications |
|---|---|---|---|---|
| 293-L0096-004 | 16 oz | Tub | Off-White | Plain and Anti-Friction Bearings |
| 293-L0096-098 | 14 1/2 oz | Cartridge | Tan | Multi-Purpose |
Automotive Lubricants
Features:
• A smooth light‑bodied grease made especially for motor assembly.
• Provides lubrication during the initial start up before the motor oil has circulated.
Thickener: Calcium
Applicable Materials: Metals
Resistance: Water
Quantity: 36 per carton
| SKU | Capacity Wt. | Color | Odor/Scent | Applications |
|---|---|---|---|---|
| 293-L0034-094 | 10 oz | Dark Green | Fatty | Worm Gear |
| 293-L0034-092 | 10 oz | Off-White | Mineral Oil | Press Fittings; Door Hinges; Battery Terminals; Windshield Wipers; Radio Antennas; Shackle Pin; Nuts |
EMB High Speed Electric Motor Grease
Features:
• Developed specifically for the lubrication of electric motor bearings, fans and other high‑speed, grease‑type ball and roller bearings.
• Compatible with seals, gaskets and plastics.
• Protects against rust and oxidation.
Applicable Materials: Metal; Plastic
Applications: Bearing
Resistance: Water
| SKU | Capacity Vol. | Color | Thickener | Odor/Scent |
|---|---|---|---|---|
| 293-L0148-098 | 14-1/2 oz | Off‑White | Lithium Polymer | Oil |
FGL Series Food Machinery Grease
Features:
• High load‑carrying capability.
• High shear stability.
• Smooth, tacky, white grease.
• Anti‑wear, anti‑rust, anti‑corrosion, and anti‑oxidation additives.
• Resistance to water and caustic wash down.
• Designed for the food and beverage industries.
• For use in a variety of quick and clean applications, where a class H‑1 oil is required.
Applicable Materials: Metals
Applications: Machinery
Resistance: Corrosive Process; Water; Wear
Quantity: 40 per case
| SKU | Capacity Vol. | Color | Thickener | Odor/Scent |
|---|---|---|---|---|
| 293-L0232-098 | 14 1/2 oz | White | Aluminum Complex | Oil |
FML Series Multi-Purpose Food Grade Grease
Features:
• Anti‑wear, anti‑rust, anti‑corrosion, and anti‑oxidation additives.
• Used in the food processing industry for quick, clean applications.
Applicable Materials: Metals
Applications: Machinery
Resistance: Water
Quantity: 40 per case
| SKU | Capacity Wt. | Color | Thickener | Odor/Scent |
|---|---|---|---|---|
| 293-L0145-098 | 14 1/2 oz | White | Anhydrous Calcium | Mineral Oil |
Gear Shield Series Open Gear Grease
Features:
• Made for all types of open gears.
• Gear Shield Extra Heavy is for adverse conditions where gears are exposed to abrasive conditions such as quarry and mining operations.
• Low‑temp gear shield is for cold weather applications.
• Anti‑wear, anti‑rust, anti‑corrosion, and anti‑oxidation properties.
Odor/Scent: Mineral Oil
Applicable Materials: Metals
Applications: Open Gear
Resistance: Water; Wear
| SKU | Capacity Wt. | Packing Type | Color | Thickener | Quantity |
|---|---|---|---|---|---|
| 293-L0152-000 | 10 1/2 oz | Caulk Cartridge | Black | Lithium | 40 per carton |
| 293-L0152-063 | 11 oz | Spray Can | Black | Lithium | 12 per carton |
High Temp Multi-Purpose Grease
Features:
• Multi-purpose, high temperature grease.
• Non‑melt type, workable with frequent lube intervals.
Applications: Multi-Purpose
Resistance: Water
Quantity: 40 per carton
| SKU | Capacity Wt. | Color | Thickener | Odor/Scent | Applicable Materials |
|---|---|---|---|---|---|
| 293-L0161-098 | 14 1/2 oz | Beige | Inorganic Gelling Agent | Mineral Oil | Metals |
MAG-1 Grease
Features:
• Smooth, off‑white grease.
• Capable of withstanding extreme pressure.
• Anti‑wear, anti‑rust, anti‑corrosion, and anti‑oxidation properties.
• For use at low temperatures, for multi‑purpose applications, and applications such as freezers and fifth wheels.
Applicable Materials: Most Metals; Plastic; Rubber
Applications: Multi‑Purpose
Resistance: Water
Quantity: 40 per carton
| SKU | Capacity Wt. | Color | Thickener | Odor/Scent |
|---|---|---|---|---|
| 293-L0189-098 | 14 oz | Off‑White | Lithium Polymer | Mineral Oil |
Mo-Lift No.2 Multi-Purpose Grease
Features:
• Anti‑wear/extreme pressure is reinforced by the addition of Molybdenum Disulfide (MoS2).
• Non‑corrosive.
• Highly water‑resistant.
Applicable Materials: Metal; Plastic
Resistance: Water
| SKU | Capacity Wt. | Color | Thickener | Odor/Scent |
|---|---|---|---|---|
| 293-L0180-098 | 14-1/2 oz | Steel Gray | Lithium Polymer | Mineral Oil |
No. 1200-2 Multi-Purpose Grease
Features:
• Petroleum‑based grease.
• Provides a high film strength and great shear stability.
• Anti‑wear and extreme pressure additives.
Applicable Materials: Metals
Applications: Multi‑Purpose
Resistance: Water
Quantity: 40 per carton
| SKU | Capacity Wt. | Color | Thickener | Odor/Scent |
|---|---|---|---|---|
| 293-L0102-098 | 14 1/2 oz | Beige | Lithium 12‑Hydroxy Stearate 8% | Mineral Oil |
No. 3000 Multi-Purpose Grease
Features:
• Provide durable, tenacious, adhesive films to protect against water, rust and corrosive contaminants.
• Protects against water, rust, and corrosive contaminants.
• For applications such as industrial, construction, and mining equipment, under adverse conditions.
Applicable Materials: Metals
Applications: Multi‑Purpose
Resistance: Corrosive Contaminants; Corrosive Process; Rust; Water
Quantity: 40 per carton
| SKU | Capacity Wt. | Color | Thickener | Odor/Scent |
|---|---|---|---|---|
| 293-L0108-098 | 14 1/2 oz | Black | Lithium | Mineral Oil |
Power Hammer & Chisel Grease
Features:
• Super heavy‑duty, extreme pressure grease.
• Fortified with Moly, Copper and Graphite.
• Provides unsurpassed anti‑wear protection.
• Greatly extends shaft and bushing life.
• Highly water-resistant.
Applicable Materials: Hammers; Chisels
Applications: Multi‑Purpose
Resistance: Water
| SKU | Capacity Vol. | Color | Thickener | Odor/Scent |
|---|---|---|---|---|
| 293-l0190-098 | 14-1/2 oz | Black | Aluminum Complex | Mineral Oil |
Red Lithium Grease
Features:
• Grease that can be used for a variety of industrial, automotive and heavy-duty construction applications.
• This rugged, extreme pressure lubricant can withstand higher operating temperatures than traditional lithium multi‑purpose greases as well as most lithium complex greases.
• Tacky, adhesive and very water-resistant.
Color: Red
Thickener: Aluminum Complex
Odor/Scent: Mineral Oil
Applications: Automotive (including the fleet and truck operator) Marine, Construction, Logging, Mining, Industrial
Resistance: Water
| SKU | Capacity Wt. | Capacity Vol. |
|---|---|---|
| 293-L0167-098 | 14-1/2 oz | 14-1/2 oz |
Spray Lube “A”
Features:
• A multi‑purpose, white lithium‑based lubricant of medium density.
• Sprays like a fluid, congeals to a grease.
Applicable Materials: Most Metals; Plastic; Rubber
Applications: Multi‑Purpose
Resistance: Moisture; Most Chemicals; Most Acids
Quantity: 12 per carton
| SKU | Capacity Wt. | Color | Thickener | Odor/Scent |
|---|---|---|---|---|
| 293-L0034-063 | 11 oz | White | Lithium | Solvent |
JT-6® Hi-Temp Grease #2
Features:
• Formulated with a high dropping point for use over a wide temperature range.
• Provides excellent protection in severe service and outstanding shock load protection.
Color: Red
Thickener: Lithium Complex
Odor/Scent: Mild Petroleum
Applicable Materials: Metal
Applications: Agricultural; Automotive Chassis and Bearings; Construction; Industrial; Trucking Chassis and Wheel
Resistance: Shock Load; Cold Weather
Quantity: 1 each
| SKU | Capacity Wt. | Capacity Vol. | Packing Type |
|---|---|---|---|
| 122-665005002080 | 14 oz | 14 oz | Cartridge |
| 122-665005002044 | 35 lb | 35 lb | Pail |
JT-6® Multi-Purpose Grease
Features:
• Waterproof and highly water wash resistant.
• Excellent extreme pressure properties.
• Prevents against shock loading.
• Outstanding rust and corrosion prevention.
• Very low oil separation rate.
| SKU | Capacity Wt. | Packing Type | Odor/Scent | Applications |
|---|---|---|---|---|
| 122-665006002080 | 14 oz | Cartridge | Mild Petroleum | Speed Bearings; Greased Chassis Points; Fifth Wheels; Water Pumps |
| 122-665006002044 | 35 lb | Pail | N/A | N/A |
JT-6® Multi-Purpose Hi-Temp Grease w/Moly
Features:
• High performance mining and construction grease that provides superior performance where a moly ‑ compounded, adhesive, multi‑purpose high temperature lithium complex grease is required.
• This product gives optimum protection in severe environments.
Applicable Materials: Metal
Applications: Automotive Equipment; Agricultural Equipment; Trucking Equipment; Industrial Equipment; Mining Equipment; Construction Equipment
Resistance: Rust; Oxidation; Water; Wear
Quantity: 1 each
| SKU | Capacity Wt. | Color | Thickener | Odor/Scent |
|---|---|---|---|---|
| 122-665056002080 | 14 oz | Gray/Black | Lithium Complex | Mild |
High Temperature Bearing Lubricants
Features:
• Never‑Seez® High Temperature Bearing Lubricant is an exclusive combination of a specially formulated high temperature grease and lubricating enhancers that provides long-lasting lubrication.
• Has no “dropping point”— will not melt.
• Good extreme pressure characteristics.
• Contains no metallic particles.
Applications: Heat Treat Ovens and Furnaces; High Temperature Exhaust
Fans; Kiln Ovens and Casters; Oven Damper Controls; Process Oven Bearings
Quantity: 1 each
| SKU | Capacity Wt. | Color | Odor/Scent | Applicable Materials | Resistance |
|---|---|---|---|---|---|
| 535-30850498 | 14.1 oz | Black | Grease‑like | Metal | Water |
LubriMatic Multi-Purpose Lithium Greases
Features:
• Long-lasting, hard-working formula delivers high performance in a wide range of heavy-duty applications.
• Works best for lubricating rolling parts.
Applicable Materials: Chassis; Universal Joints
Applications: General Purpose Applications Around the Home, Farm or Shop
Quantity: 10 per pack
| SKU | Capacity Wt. | Color | Thickener | Quantity |
|---|---|---|---|---|
| 570-11315 | 14 oz | Black | Lithium 12‑Hydroxy Stearate | 10 per pack |
Liquid Wrench® White Lithium Grease
Features:
• Creates long‑lasting, heavy-duty lubrication.
• Provides a thick grease coat.
• Does not freeze, melt or run.
• Use on lawn tractors, boats and large outdoor hinges.
• For use on moving parts exposed to the elements.
• Non‑sagging film stays in place.
Applications: Auto; Home; Marine; RV; Farm; Shop
Resistance: Corrosive Process; Moisture
| SKU | Capacity Vol. | Color | Odor/Scent | Applicable Materials |
|---|---|---|---|---|
| 615-L616 | 10.25 oz | Off White | Petroleum | Most Metals; Plastic |
Grease Lubricants
Features:
• Synthetic, heavy-duty lubricant that is compatible with most other lubricants.
• Will not run, drip, evaporate, melt, separate, or form gummy deposits.
Applicable Materials: Fabric; Leather; Plastic; Rubber; Wood
Applications: Multi‑Purpose
Resistance: Corrosive Process; Dirt; Dust; Saltwater; Water; Wear
| SKU | Capacity Wt. | Packing Type | Quantity | Color | Odor/Scent |
|---|---|---|---|---|---|
| Applicable Materials: Fabric; Leather; Plastic; Rubber; Wood | |||||
| 692-82340 | 1 cc | Packet | 100 per pack | Translucent White | Mild |
| 692-91003 | 3 oz | Tube | 1 Each | Translucent White | Mild |
| 692-21030 | 3 oz | Tube | 3 oz tube | Translucent White | Mild |
| 692-41160 | 400 g | Jar | 400 gram can | Translucent White | Mild |
| 692-41150 | 400 g | Cartridge | 400 gram cartridge | Translucent White | Mild |
| 692-41050 | 5 lb | Tub | — | Translucent White | Mild |
Grease Fittings
Breathers
Features:
• Felt filter to reduce dirt contamination.
• No airflow restrictions.
• Trivalent zinc plating.
Connection Type: Male
Body Material: Zinc Dichromate
| SKU | Shape | Male Thread | Length | Wrench Size |
|---|---|---|---|---|
| 025-321620 | Hex | 1/8 in (PTF) | 25/32 in | 7/16 in |
Drive Fittings
Features:
• Used extensively to avoid tapping costs in a wide variety of applications.
• Alemite serrated shank grips securely and simplifies the replacement of damaged fittings in old or oversized holes.
• Recommended only for low and medium pressures.
Connection Type: Male/Male
Body Material: Zinc
Applications: Industrial machines
| SKU | Shape | Male Thread | Length | Wrench Size |
|---|---|---|---|---|
| 025-1728-B | Straight | 1/8 in | 33/64 in | 7/16 in |
Grease Fitting Adapters
Features:
• Extra heavy-duty high-pressure connection units withstand potential pressures in lubrication.
• All steel bright zinc plated to resist corrosion.
Connection Type: Male/Female
Body Material: Zinc
| SKU | Shape | Male Thread | Length | Wrench Size |
|---|---|---|---|---|
| 025-51942 | Hex | 1/4 in (SAE) | 0.88 in | 1/8 in |
Hydraulic Fittings
Features:
• Carbon steel fitting with zinc‑plated finish.
• Used on industrial machines and heavy equipment.
Operating Pressure: 10,000 psi
Connection Type: Male/Male
Body Material: Metal
| SKU | Male Thread | Length | Wrench Size | Applications |
|---|---|---|---|---|
| Shape: Straight | ||||
| 025-1627-B | 1/4 in (PTF) | 7/8 in | 9/16 in | Industrial Machines; Heavy Equipment |
| 025-1641-B | 1/4 in (SAE) | 35/64 in | 5/16 in | Industrial Machines; Cars & Trucks |
| 025-1610-BL | 1/8 in (PTF-SAE) | 11/16 in | 7/16 in | Industrial Machines; Heavy Equipment |
Precision Brand Grease Fitting Assortments
Features:
• Built‑in ball, under spring pressure, prevents dirt from entering.
• Handy kit for shop toolroom or toolbox.
• Plastic compartment box is easy to store.
• Push type, plated fittings permit lubricant to flow.
| SKU | Shape | Body Material |
|---|---|---|
| 605-12945 | Multiple | Steel |
Grease Gun Accessories
PowerLuber® Battery
Features:
• Automatically recognizes input voltage (12 or 24 volt accessory outlet).
• Charging system identifies damaged or shorted batteries.
• Internal protection keeps charger from becoming damaged by shorted batteries.
• Provides the flexibility and convenience of charging the 14.4v PowerLuber battery in either the standard 12v accessory outlet or the 24v accessory outlet found in some heavy equipment.
• Recharges battery in 1 hour.
• Will not overcharge nor damage battery.
Height: 3.380 in
Wt.: 2 1/2 lb
| SKU | Voltage | Batt. Cap. | Length | Width |
|---|---|---|---|---|
| 438-1201 | 12.00 V | 1,300.000 mA-h | 8 1/2 in | 6 1/2 in |
Grease Gun Hoses, Extensions & Adapters
Button Head Couplers
Features:
• Designed for use with hand operated grease guns only.
• For use with button head fittings.
• High quality to ensure durability and reliable performance.
| SKU | Fitting Type | Wt. |
|---|---|---|
| 025-42030-A | Standard Pull-On | 0.29 lb |
| 025-304300-A | Giant Pull-On | 0.45 lb |
Grease Gun Extension Hoses
Features:
• Economical and durable hose.
• 12,000 psi burst pressure.
| SKU | Operating Pressure |
|---|---|
| 025-317850-1F | 4,800.0 psi |
Hydraulic Couplers
Features:
• Place your trust in this sturdy grease coupler replacement.
• Provides quick, positive and leakproof connection with hydraulic fittings.
• Durable metal or rubber seal.
| SKU | Operating Pressure | Used With |
|---|---|---|
| 025-308730 | 10,000 psi | Grease Guns |
Grease Gun Hoses, Extensions & Adapters
Extensions for Manually or Air-Operated Grease Guns
Features:
• Premium quality extension designed for manual or air‑operated grease guns.
• Strategically placed coiled spring provides non‑slip, push‑pull grip and prevents accidental “kinking” which could cause hose ruptures.
• Maximum working pressure 4500 psi.
| SKU |
|---|
| 438-5818 |
Hydraulic Couplers
Features:
• For all hydraulic type grease fittings.
• Small outside diameter permits easy contact with recessed fittings.
• Built‑in ball‑check prevents leak and lubricant backup.
| SKU | Operating Pressure |
|---|---|
| 438-5845 | 7,500.0 psi |
| 438-5852 | 7,500.0 psi |
Needle Nozzles
Features:
• Allows operator to contact flush type or hard to reach hydraulic type fittings.
| SKU | Fitting Size | Length | Operating Pressure | Fitting Type |
|---|---|---|---|---|
| 438-5803 | 1/8 in (FNPT) | 1/-3/4 in | 5,000 PSI | Needle Nozzle |
Grease Gun Accessories
Features:
• Precision engineered to withstand the rugged use of most automotive, farm and industrial applications.
Used With: 1/8 in (NPT) Threads
Packing Type: Bulk
| SKU | Fitting Size | Length | Operating Pressure | Fitting Type |
|---|---|---|---|---|
| 570-05-028 | 1/8 in (NPT) | 1-7/16 in | 4,500 PSI | Coupler |
Grease Hoses
Features:
• For use on hand operated grease guns only.
• Steel 1/8” NPT male fittings on each end.
• Recommended working pressure is 5,000 PSI.
Used With: Hand Grease Guns
| SKU | Fitting Size | Length | Packing Type | Operating Pressure |
|---|---|---|---|---|
| Fitting Type: Steel on Each End | ||||
| 570-10-212 | 1/8 in NPT(M) | 12 in | Carded | 3,000.0 psi |
| 570-10-218 | 1/8 in NPT(M) | 18 in | Bulk | 3,000.0 psi |
Grease Guns
Professional Lever Grease Guns
Features:
• Rugged and lightweight die-cast aluminum head.
• Vinyl cover for a comfortable and sure grip.
• 3 way loading (14 ounce cartridge, suction, or fast refill from Alemite Loader Pump).
• Bleeder valve.
Type: Lever Gun
| SKU | Capacity Vol. | Operating Pressure | Outlet Type | Wt. |
|---|---|---|---|---|
| Designated Fluid: Grease | ||||
| 025-500-E | 16 oz | 10,000 psi | Hose/Coupler | 3.53 lb |
| 025-500 | 16 oz | 10,000 psi | Rigid Extension/Coupler | 3.88 lb |
Professional Pistol Grip Grease Guns
Features:
• Simple, quick priming – heavy-duty follower spring to maintain prime.
• Exclusive dual leverage feature – volume or pressure mode.
• Ergonomic, rugged cast handle.
• Universal follower for cartridge and bulk use.
• Reliable, long-lasting coupler.
• Bleeder valve.
Designated Fluid: Grease
Type: Pistol Grip Gun
| SKU | Capacity Vol. | Operating Pressure | Outlet Type | Wt. |
|---|---|---|---|---|
| 025-555-E | 16 oz | 7,500 psi | Hose/Coupler | 4.55 lb |
| 025-555 | 16 oz | 7,500 psi | Rigid Extension/Coupler | N/A |
20V Max* Grease Gun Kit
Features:
• Variable speed trigger offers precise control of the grease flow.
• Bright LED list assists in locating hard to see grease fittings in low‑light situations.
• Maximum initial battery voltage (measured without a workload) is 20 volts.
• Nominal voltage is 18.
Outlet Type: Hose
Designated Fluid: Grease
Type: Cordless Grease Gun
Includes: DCGG71 Grease Gun - 20V Max DCB204 Battery 4.0 - Charger - Shoulder Strap - Kit Box
| SKU | Capacity Vol. | Operating Pressure | Wt |
|---|---|---|---|
| 115-DCGG571M1 | 14.5 oz | 10,000 psi | 15.45 lb |
Heavy Duty Pistol Guns
Features:
• Designed for an operating pressure of up to 6,000 PSI.
• One‑hand operation.
• Pistol action gun has 3 way loading (cartridge, bulk or loader nipple).
Designated Fluid: Grease
Type: Pistol Grease Gun
| SKU | Capacity Vol. | Operating Pressure | Outlet Type | Wt |
|---|---|---|---|---|
| 250-160 | 20 oz | 6,000 psi | Hose/Coupler | 3 3/4 lb |
Air Powered Grease Guns
Features:
• Full automatic operation—cycles continuously when trigger is pulled, self‑priming.
• Low operational noise.
• Flip‑over follower eliminates grease bypass.
• Heavy‑duty spring for prime retention.
• Locking follower rod for easy loading.
• 40:1 air motor.
Type: Pneumatic Pump
Wt.: 5.40 lb
| SKU | Capacity Vol. | Operating Pressure | Outlet Size | Outlet Type |
|---|---|---|---|---|
| 438-1162 | 14 1/2 oz | 150 psi | 7/16 in(UNEF) | Hose |
Heavy Duty High Pressure Grease Guns
Features:
• Precision‑machined, all steel handle, body, and guard bracket provide durability and longevity.
• Unique, precision control inlet check valve provides ease of handle operation even with increase in pressure.
• Knurled handle for positive grip.
• Handy trigger guard prevents pinching.
• Reversible inlet check seat and hydraulic jaws provide double life.
• Balanced design reduces user fatigue.
Wt.: 2 lb
| SKU | Operating Pressure | Outlet Size | Outlet Type | Designated Fluid |
|---|---|---|---|---|
| 438-740 | 7,500 psi | 1/8 in NPT(F) | Nozzle/Coupler | Grease |
Lever Type Heavy-Duty Grease Guns
Features:
• Flip‑over follower is set for cartridge use.
• Extra‑heavy follower spring insures positive priming and uninterrupted pumping action.
| SKU | Capacity Vol. | Outlet Type | Wt. |
|---|---|---|---|
| 438-1142 | 16 oz Bulk; 14.5 oz Cartridge | 6 in Extention/Coupler | 3.24 lb |
| 438-1147 | 16 oz Bulk; 14.5 oz Cartridge | 18 in Hose/Coupler | 4 lb |
| 438-1148 | 16 oz Bulk; 14.5 oz Cartridge | 6 in Extention/Coupler | 4.24 lb |
Pistol Grip Grease Guns
Features:
• Features electro‑static, corrosion‑resistant finish and non‑slip knurling for better grip.
• Steel block head offers protection for hardened steel plunger.
• Heavy-duty steel barrel for long life.
• Posi‑lock follower rod with T‑handle provides sure‑handed grip and easy filling at any position.
Includes: 18 in flex hose
Wt.: 2.9 lb
| SKU | Capacity Vol. | Operating Pressure | Outlet Type | Type |
|---|---|---|---|---|
| 438-G113 | 14 oz Catrdridge | 6,000 PSI | Coupler | Hand Held Grease Gun |
Pistol Grip Heavy-Duty Grease Guns
Features:
• Rugged cast pump head for strength and durability.
• Jam‑proof toggle mechanism prevents binding or accidental bending of plunger.
• Exclusive “Flip‑Over” follower allows a superior seal for either cartridge or bulk loading applications.
| SKU | Capacity Vol. | Operating Pressure | Outlet Type | Wt. |
|---|---|---|---|---|
| Designated Fluid: Grease | ||||
| 438-1133 | 16 oz Bulk; 14.5 oz Cartridge | 7,500 psi | 18 in Whip Hose/Coupler | 3.4 lb |
| 438-1132 | 16 oz Bulk; 14.5 oz Cartridge | N/A | 5 in Extension/Coupler | 4 lb |
| 438-1134 | 16 oz Bulk; 14.5 oz Cartridge | 7,500 psi | 18 in Whip Hose/Coupler | 4.03 lb |
M18™ Cordless 2-Speed Grease Guns
Features:
• Pre‑set grease counter dial.
• Flexible hose offers greater access to difficult to reach fittings.
• Air bleeder valve for quick priming.
• Lock‑on/Lock‑off trigger delivers added user convenience.
Includes: (2) M18™ REDLITHIUM™ Compact Battery; 48 in Flex Hose w/Spring Guard; Hard Carrying Case; High Pressure Grease Coupler; M18™ & M12™ Multi‑Voltage Charger; M18™ Cordless 2‑Speed Grease Gun; Shoulder Strap
| SKU | Capacity Vol. | Operating Pressure | Outlet Type | Wt |
|---|---|---|---|---|
| 495-2646-22CT | 16 oz | 10,000 psi | 48 in Hose/Coupler | 8.5 lb |
HD Pistol Grease Guns
Features:
• 3-way loading: 14 oz cartridge, bulk or suction.
• Variable stroke for use in tight places.
• Vinyl Handle Grip.
Includes: 18 in Flex Hose; Air Bleeder Valve; Bulk Loader Fitting
| SKU | Capacity Vol. | Operating Pressure | Outlet Type | Designated Fluid | Wt |
|---|---|---|---|---|---|
| 570-30-416 | 14 oz | 7,000 psi | 18 in Flex Hose | Liquid grease | 2 1/2 lb |
Lever Action Grease Guns
Features:
• Constructed of heavy-duty steel.
• Variable/short stroke for easy use in confined areas.
• Ideal for household and do-it-yourself automotive use.
| SKU | Operating Pressure | Outlet Size | Outlet Type | Designated Fluid | Type | Wt. |
|---|---|---|---|---|---|---|
| Capacity Vol.: 14 oz | ||||||
| 570-30-475 | 10,000 psi | N/A | Coupler | Grease | Professional Lever Action Grease Gun | 3.22 lb |
| 570-30-465 | 10,000 psi | 1/8 in NPT | Deluxe Coulper | Grease | Industrial Lever Action Grease Gun | 3.30 lb |
| 570-30-200 | 6,000 psi | 1/8 in NPT | Ball Check Coupler | Standard 14 oz Grease Cartridge |
Standard Lever Action Grease Gun |
3 3/4 lb |
Pistol Grease Guns
Features:
• Convenient one-hand operation.
• 2-way loading: cartridge or suction.
Type: Standard-Duty Pistol
Wt.: 16.53 lb
| SKU | Capacity Vol. | Operating Pressure | Outlet Size | Outlet Type |
|---|---|---|---|---|
| 570-30-300 | 14 oz | 7,000 psi | 1/8 in NPT | Coupler |
Lubricating Product Accessories
Spray Applicators
Features:
• 16 oz spray bottle is designed for bulk use of WD-40.
• Interior is treated to withstand the penetrating power of WD-40.
Includes: Empty spray applicator with adjustable trigger nozzle
| SKU | Type | Packing Type |
|---|---|---|
| 780-10100 | Applicator | Case |