Wire Brush Abrasives

Wheel Brushes

Scotch-Brite™ Radial Bristle Brushes

Features:
• Molded, abrasive filled bristles finish, polish, and deburr more effectively than wire brushes.
• Conformability allows abrasive to stay in contact with complex-shaped parts in robotic processing.
• Cleans with minimal pressure and contains no wire filaments for improved safety.
• Flexible bristles produce uniform finishes around protrusions, detail grooves, patterns, and other hard-to-reach areas.
Face Width: 1/2 in

SKU	Dia.	Arbor Dia.	Bristle Material
405-048011-27605	6 in	1 in	Ceramic
405-048011-27606	6 in	1 in	Ceramic

Stringer Bead Twist Knot Wheels

Features:
• Fastest cutting action.
• Designed for root and hot pass weld cleaning in pipe joining application.
• Tightly twisted for low flex, high impact brushing action.
Bristle Material: Carbon Steel
Face Width: 3/16 in

SKU	Dia.	Bristle Diam	Arbor Diam.	Arbor Thread	No. of Knots
419-82186	4 in	0.02 in	5/8 in	5/8 in - 11	32

Crimped Wheel Brushes

Features:
• Provides very flexible brushing action.
• For light cleaning and deburring.
Arbor Diam: 1/4 in
Stem Diam: 1/4 in
Arbor Thread: 1/4 in

SKU	Dia.	Bristle Material	Bristle Diam	Face Width
102-CFX-3SPOP	3 in	Stainless Steel	0.014 in	1/2 in
102-BW-9220	3 in	Stainless Steel	0.014 in	5/8 in

Knot Wheel Brushes

Features:
• Heavy-duty brushing action with some flexibility.
• Ideal for demanding cleaning applications on somewhat irregular surfaces.
• Use for general-purpose applications.
Arbor Diam: 5/8 in - 11
No. Of Knots: 20
Arbor Thread: 5/8 in - 11

SKU	Dia.	Bristle Material	Bristle Diam	Face Width
102-R4K58	4 in	Carbon Steel	0.014 in	4 in
102-4K58	4 in	Carbon Steel	0.014 in	5/8 in
102-4K58S	4 in	Stainless Steel	0.014 in	5/8 in
102-R4K58S	4 in	Stainless Steel	0.02 in	1/2 in

Standard Twist Knot Wheels

Features:
• Aggressive brushing action for general-purpose deburring, cleaning, and surface preparation applications.
• Weld preparation and cleaning, removing rust, scale and oxidation.
Arbor Diam: 5/8 in - 11
No. Of Knots: 24
Face Width: 1/2 in
Arbor Thread: 5/8 in - 11

SKU	Dia.	Bristle Material	Bristle Diam
102-6T58	6 in	Carbon Steel	0.023 in

Stringer Bead Wheel Brushes

Features:
• Very narrow face design primarily for weld cleaning and to access hard-to-reach areas.
Arbor Diam: 5/8 in - 11
Arbor Thread: 5/8 in - 11

SKU	Dia.	Bristle Material	Bristle Diam	No. of Knots	Face Width
102-4S58	4 in	Carbon Steel	0.02 in	30	4 in
102-R4S58	4 in	Carbon Steel	0.02 in	30	4 in
102-R6S58	6 in	Carbon Steel	0.02 in	48	3/6 in
102-6S58	6 in	Carbon Steel	0.02 in	48	6 in
102-7S58	7 in	Carbon Steel	0.02 in	56	3/6 in
102-4S58S	4 in	Stainless Steel	0.02 in	30	4 in
102-R4S58S	4 in	Stainless Steel	0.02 in	30	4 in
102-BW-862	6 in	Stainless Steel	0.02 in	48	3/6 in
102-6S58S	6 in	Stainless Steel	0.02 in	48	6 in
102-BW-855	5 in	Steel	0.02 in	38	3/16 in
102-BW-760	6 in	Steel	0.023 in	24	1/2 in

Crimped Wire Wheels-SSM Series

Features:
• Light to medium-duty cleaning.
• For removal of rust, paint and corrosion.
Stem Diam: 1/4 in

SKU	Dia.	Bristle Material	Bristle Diam	Stem Diam.
066-09551	3 in	Steel	0.0104 in	1/4 in
066-09145	3 in	Steel	0.014 in	1/4 in

Stringer Bead Knot Wire Wheels-STCM Series-Very Narrow Face

Features:
• Very narrow face designed for weld cleaning and hard-to-reach areas or narrow channels.
Face Width: 1/4 in

SKU	Dia.	Bristle Material	Bristle Diam	No. of Knots	Arbor Diam.	Arbor Thread
066-11215	4 in	Stainless Steel	0.02 in	32	5/8 in - 11	5/8 in - 11
066-12685	4 1/2 in	Carbon Steel	0.02 in	30	5/8 in - 11	5/8 in - 11

Stringer Wire Wheels

Features:
• High tensile, heat-treated carbon or stainless steel wire.
• Provides long-lasting aggressive brushing action.
• Internal holding plate construction provides reduced knot movement and increased control and brush life.
Arbor Diam: 5/8 in - 11

SKU	Dia.	Bristle Material	Bristle Diam
115-DW4925B	4 in	Carbon	.02 in

ADHESIVE PRODUCTS

Adhesive Product Accessor

Cartridge Mix Nozzles

Features:
• 1:1 epoxy adhesives (50ml).
• Mixing and delivery tool for Devcon.

SKU	Capacity Volume
230-14285	50 ml

Mark 5™ Dispensing Systems

Features:
• 1:1 and for 10:1 ratio.
• Eliminates guesswork, excessive waste, and time associated with manually weighing and mixing two‑part adhesive systems.
• For dispensing and applying Devcon® adhesives for repair and assembly operations.
• Thoroughly mixes adhesives.
• Uses adhesive in 50‑ml Dev‑Pak™ cartridges.

SKU	Type
230-14280	Applicator

Adhesives & Glues

Scotch-Weld™ Neoprene High Performance Contact Adhesive 1357

Features:
• Gray‑Green contact adhesive can be used to bond most rubber, cloth, metal, wood, foamed glass, paper honeycomb, decorative plastic laminates and many other substrates.
• Meets requirements of MMM‑A‑121.
Chemical Compound: Polychloroprene

SKU	Capacity Vol.	Color
405-021200-19892	1 qt	Gray

Scotchkote™ Liquid Epoxy Coatings

Features:
• Two‑part liquid epoxy kit suitable for brushing used for patching pipe coatings.
• It can be used as a patch material, a girth weld coating, a stand-alone coating for pipe rehabilitation, and in a wide variety of other field applications where corrosion protection of metal is required.
Tensile Strength: 4000 psi
Chemical Compound: 4‑Nonyl Phenol; C.I. Pigment Green 7; Color, Apha; Hydrous Magnesium Silicate; M‑Xylene‑. ALPHA.ALPH

SKU	Capacity Vol.	Color
500-175743	0.63 L; 0.31 L	Blue-Green

Super Weatherstrip Adhesives

Features:
• Super weather‑strip adhesive is a strong, flexible, rubbery adhesive that can withstand vibration, oil, grease, and extreme temperature variations.
• It can be used to bond weather‑stripping to car doors, trunks, T‑tops, moon roofs and sunroofs.
• It provides the strength and rapid setting needed.
Chemical Compound: Neoprene Rubber
Working Time: <4 min

SKU	Capacity Vol.	Color
405-051135-08001	5 oz	Yellow

Hi-Strength 90 Spray Adhesives

Features:
• Has high‑contact bond strength, one‑minute dry time, high temperature resistance, low misting, precise spray control and variable width spray pattern.
Adhesive Tensile Shear: 600 psi
Tensile Strength: 600 psi
Chemical Compound: Acetone
Working Time: 1 min to 10 min

SKU	Capacity Vol.	Color
405-021200-30023	17.6 oz	Clear

Multi-Purpose 27 Spray Adhesives

Features:
• Provides professional, industrial strength for demanding applications at an economical price.
• Includes a versatile adhesive that bonds a wide range of lightweight materials.
• Offers a fast, aggressive tack for a quick bond that reduces set time.
Adhesive Tensile Shear: 200 psi
Chemical Compound: Acetone; Cyclohexane; Isobutane; Propane
Packing Type: Aerosol Can

SKU	Capacity Vol.	Color
405-051111-07832	20 fl oz	White

Neoprene High Performance Contact Adhesive 1357

Features:
• High performance contact adhesive that provides a long bonding range and excellent initial strength.
• Adheres exceptionally well to many decorative plastic laminates, paper honeycomb, rubber, cloth, metal, wood and foamed glass.
Test & Approvals: Meets Requirements of MIL‑A‑21366A and MMM‑A‑121
Packing Type: Tube

SKU	Capacity Vol.	Color
405-021200-19887	5 oz	Gray-Olive

Nitrile High Performance Plastic Adhesive 1099

Features:
• Fast drying adhesive with good resistance to plasticizer migration.
• High strength and resistance to weathering, water, oil and many solvents.
Chemical Compound: Nitrile Rubber
Packing Type: Tube

SKU	Capacity Vol.	Color
405-021200-19808	5 oz	Light Tan

Scotch-Grip™ Rubber & Gasket Adhesive

Features:
• Versatile, solvent based high performance adhesive with low viscosity for easy application.
• Good oil and heat resistance.
• Is commonly used for bonding most rubber and gasket material.
Packing Type: Tube

SKU	Capacity Vol.	Color	Working Time
405-021200-19718	5 oz	Brown	15 min
405-021200-19868	5 oz	Yellow	12 min

Scotch-Weld™ Two-Part Epoxy Adhesives

Features:
• One‑part cyanoacrylate adhesives apply from the container and rapidly reach handling strength at room temperature without a catalyst.
• Bonds achieve 80 percent of full strength in an hour.
• A single drop per square inch can bond many plastics, rubber, metal and more with tensile strength up to 5,000 psi.
Test & Approvals: Meets Corrosion Requirements of MIL‑S‑461633

SKU	Capacity Vol.	Color	Chemical Compound	Packing Type
405-021200-22648	1.7 oz	Clear	Ethyl	Duo-Pak
405-021200-87195	1.7 oz	Clear	—	Duo-Pak
405-021200-82236	37 ml	Clear	Ethyl	Duo-Pak

Super 77™ Multi-Purpose Spray Adhesives

Features:
• Multi-purpose spray adhesive bonds to many surfaces.
• Great for use in home, office and craft projects.
• Versatile, quick drying and transparent.
• Fast, permanent bond provides quick results.
• Aggressive tack provides high initial grab with enough time to position materials properly.
• Industrial sized can provides high coverage.
• Resists dripping or running when used in vertical applications.
Chemical Compound: Synthetic Elastomer

SKU	Capacity Vol.	Color	Tensile Strength	Working Time
405-021200-21210	16.75 oz	Clear	300 psi	15 sec to 15 min
Low VOC <25%
405-051111-97956	24 oz	Clear	300 psi	15 sec to 30 min

High Strength Adhesives

Features:
• CA VOC Compliant formula.
• Flexible and waterproof with high sheer and peel strength.
• High strength industrial use adhesive for extra‑strong bonding of materials to a wide variety of surfaces.
• Top performer on porous surfaces with low soak‑In.
• Very fast dry‑time with 1‑minute tack time in a web‑fan spray pattern.
Chemical Compound: Hexane; Hydrocarbon; Acetone
Working Time: 1 min Tacky; 5 min Open
Packing Type: Aerosol Can

SKU	Capacity Vol.	Color
205-C8190	12 oz	Straw

1-Minute® Gel Epoxy

Features:
• Fills gaps.
• Fast‑curing without fixturing.
• Non‑sagging on vertical surfaces.
Test & Approvals: Adhesive tensile shear strength Tested by ASTM D1002 with an overlap shear run at 0.005” bond line thickness
Adhesive Tensile Shear: 1,600 psi
Working Time: 45 sec
Dielectric Strength: 490 V/mil
Packing Type: Dev‑Pak™

SKU	Capacity Vol.	Chemical Compound	Color
230-14277	50 ml	Epoxy	Amber

10 Minute™ Epoxy

Features:
• Flexible epoxy provides excellent adhesion to metals and superior peel, impact, and chemical resistance.
• High shear strength.
• Excellent chemical resistance to oils, hydrocarbons, and fuels.
• Self leveling liquid for encapsulating components.
• Bonds dissimilar substrates.
• Provides good gap fill.
Adhesive Tensile Shear: 2,400 psi
Working Time: 10 min
Dielectric Strength: 800 V/mil
Packing Type: Dev‑Pak™

SKU	Capacity Vol.	Color
230-14255	50 ml	Black

2 Ton® Clear Epoxy

Features:
• Extremely strong, medium‑cure adhesive.
• Self‑Leveling after application.
• Works to fill poorly mated joining surfaces, while providing adhesion.
• Water‑resistant formula.
• Cures without shrinking.
• Produces strong, rigid bond to metal, ceramics, wood, concrete, glass in any combination.
Adhesive Tensile Shear: 2,250 psi
Dielectric Strength: 600 V/mil

SKU	Capacity Vol.	Color	Chemical Compound	Packing Type
230-14310	25 ml	Clear; White	Epoxy	Dev-Tube™
230-14260	50 ml	Clear; White	Epoxy	Dev-Pak™

5 Minute® Epoxies

Features:
• Provides a strong bond between rigid, durable substrates ‑ great for use with glass, metal, ceramics, concrete and wood in all combinations.
Adhesive Tensile Shear: 1,400 psi
Gap Fill: 1/4 in
Working Time: 3‑6 min
Dielectric Strength: 490 V/mil

SKU	Capacity Vol.	Color	Chemical Compound	Packing Type
230-14630	1 gal	Light Amber	Epoxy	Dev-Pak™
230-14200	15 oz	Light Amber	Epoxy	Dual Bottle
230-14210	2 1/2 oz	Light Amber	Epoxy	Dual Tube
230-14250	25 ml	Light Amber	Epoxy	Dev-Tube™
230-14270	50 ml	Light Amber	Epoxy	Dev-Pak™

5 Minute® Epoxy Gels

Features:
• Fast‑curing, thixotropic, nonmigrating gel adhesive with excellent gap filling properties.
• Non‑sagging adhesive is ideal for use on vertical surfaces.
• Fills gaps to .25 inch.
Adhesive Tensile Shear: 2,500 psi
Gap Fill: 1/4 in
Chemical Compound: Epoxy
Working Time: 4‑7 min
Dielectric Strength: 440 V/mil

SKU	Capacity Vol.	Color	Packing Type
230-14240	25 ml	Opaque	Dual Syringe Tube
230-14265	50 ml	Opaque	Dev-Pak™

Aluminum Liquid (F-2)

Features:
• Aluminum‑filled pourable epoxy for making molds, patterns, and holding fixtures.
• Can be machined, drilled, or tapped.
• Low viscosity provides accurate reproduction of mold details and of delicate or intricate parts.
• Qualifies under MMM‑A‑1754.
• 75‑minute working time.
Test & Approvals: Chemical resistance was tested by immersion for 30 days at 75 °F, after 7 days room temperature cure
Adhesive Tensile Shear: 2,700 psi
Tensile Strength: 5,000 psi
Compressive Strength: 9,820 psi
Gap Fill: 1 in
Chemical Compound: Epoxy
Working Time: 75 min
Dielectric Strength: 100 V/mil
Packing Type: Kit

SKU	Capacity Vol.	Color
230-10710	1 lb	Aluminum
230-10720	3 lb	Aluminum

Brushable Ceramic

Features:
• When applied in a 15‑20 mil coating, this low‑viscosity, alumina‑filled, brushable epoxy compound provides a smooth, protective barrier against wear, abrasion, corrosion, erosion, and chemical attack.
• Low‑friction surface reduces turbulence, wear, and cavitations.
• Outstanding chemical resistance to acids, solvents, and alkalis.
• 3 colors (red blue white) to insure uniform coating.
• Red and white formulas are acceptable for use in meat and poultry plants.
• White is NSF‑certified for use in potable water applications.
• 40‑minute working time (Red, Blue).
• 21‑minute working time (White).
Test & Approvals: Chemical resistance was tested by immersion for 30 days at 75 °F, after 7 days room temperature cure; Accepted for Use in meat and poultry plants under the former USDA Food Safety and Inspection Service Product Approval Program; ANSI; NSF
Adhesive Tensile Shear: 2,000 psi
Tensile Strength: 3,800 psi
Compressive Strength: 15,200 psi
Working Time: 40 min
Dielectric Strength: 382 V/mil
Packing Type: Kit

SKU	Capacity Vol.	Chemical Compound	Color
230-11765	2 lb	Epoxy	Blue
230-11760	2 lb	Epoxy	Red

Flexane® 80 Liquid

Features:
• Medium‑viscosity urethane fills voids completely.
• Faithfully reproduces mold detail, and cures to semi‑rigid rubber.
• Ten‑hour demolding time.
Test & Approvals: Dielectric strength tested according to ASTM D149; Tensile strength tested according to ASTM D412
Tensile Strength: 2,100 psi
Working Time: 30 min
Dielectric Strength: 350 V/mil
Packing Type: Can

SKU	Capacity Vol.	Chemical Compound	Color	Gap Fill
230-15800	1 lb	Polyurethane	Black	.25”
230-15810	10 lb	Polyurethane	Black	.25”

Flexane® 94 Liquid

Features:
• Requires only a five hour demolding time.
• Low‑viscosity urethane cures to rigid rubber.
• Harder material than Flexane® 80 Liquid.
Test & Approvals: Dielectric strength tested according to ASTM D149; Tensile strength tested according to ASTM D412
Tensile Strength: 2,800 psi
Gap Fill: 1/4 in
Working Time: 10 min
Dielectric Strength: 350 V/mil
Packing Type: Kit

SKU	Capacity Vol.	Chemical Compound	Color
230-15250	1 lb	Polyurethane	Black

Floor Patch™

Features:
• All‑purpose concrete patching compound with a compression strength of 8,000 psi, three times the typical strength of concrete.
• Excellent adhesion to concrete, brick, masonry, metal or wood surfaces.
• Excellent resistance to water, oils, solvents, and alkalis.
Test & Approvals: Chemical resistance was tested by immersion for 30 days at 75 °F, after 7 days room temperature cure
Adhesive Tensile Shear: 3,500 psi
Compressive Strength: 8,000 psi
Gap Fill: 1/4 in
Working Time: 45 min

SKU	Capacity Vol.	Chemical Compound	Color
230-13120	40 lb	Epoxy	Gray

HVAC Repair (Special F)

Features:
• Aluminum‑filled epoxy adhesive for repairs to copper coils in compressors.
• Bonds to aluminum and other metals, ceramics, woods, concrete or glass.
• Hardens to a rigid bond that can be ground, drilled, or tapped.
Test & Approvals: Chemical resistance was tested by immersion for 30 days at 75 °F, after 7 days room temperature cure
Compressive Strength: 12,700 psi
Dielectric Strength: 350 V/mil

SKU	Capacity Vol.	Chemical Compound	Color
230-19770	6 1/2 oz	Epoxy	Grey

Plastic Steel® Liquid (B)

Features:
• 45‑minute working time.
• Can be machined to close tolerances.
• Hardens in about an hour.
• Low viscosity and high compressive strength.
Test & Approvals: Chemical resistance was tested by immersion for 30 days at 75 °F, after 7 days room temperature cure; Qualifies under Mil Spec MMM‑A‑1754
Adhesive Tensile Shear: 2,800 psi
Tensile Strength: 4,900 psi
Compressive Strength: 10,200 psi
Working Time: 45 min
Dielectric Strength: 30 V/mil

SKU	Capacity Vol.	Chemical Compound	Color
230-10210	1 lb	Epoxy	Dark Grey

Plastic Welder™

Features:
• Bonds dissimilar substrates as well as unprepared surfaces; great for engineered plastics, metals, ceramics, concrete, polyesters, polycarbonate, wood and more.
Test & Approvals: Peel strength tested according to ASTM D1876‑61P; Resistance tested by immersion of bonded steel lap joints for 2 weeks in antifreeze, jet fuel, 10% and 50% sulfuric acid, and 10% and 20% potassium hydroxide, and by immersion for 2 months in gasoline at 72 °F; Shear strength tested according to ASTM D1002; Compression shear strength tested according to ASTM D3931; Impact resistance tested according to ASTM D950
Adhesive Tensile Shear: 3,500 psi
Working Time: 4‑6 min

SKU	Capacity Vol.	Chemical Compound	Gap Fill
230-14300	25 ml	Methyl Methacrylate	1/8 in

Underwater Repair Putty (UW)

Features:
• Penetrates wetness to bond securely to steel, iron, aluminum, brass, bronze, concrete, wood, and some plastics.
• Invaluable for use in pulp and paper mills, wastewater treatment plants, and marine environments.
• Eliminates the need for substrate to be thoroughly dry before repair.
• Easy‑to‑mix and apply.
• Cures in temperatures as low as 40 °F.
Test & Approvals: Chemical resistance was tested by immersion for 30 days at 75 °F, after 7 days room temperature cure
Adhesive Tensile Shear: 2,685 psi
Compressive Strength: 5,625 psi
Gap Fill: 1/4 in
Chemical Compound: Epoxy
Working Time: 45 min
Dielectric Strength: 150 V/mil
Packing Type: Can

SKU	Capacity Vol.	Color
230-11800	1 lb	Gray

Wear Guard™ High Load

Features:
• Alumina ceramic bead‑filled epoxy system with outstanding abrasion resistance for severe service conditions with particulate greater than 1/8”.
• Will not sag on overhead or vertical surfaces.
• Exceptional resistance to a wide range of acids, bases, saturated salt solutions, oils, and many other chemicals.
• Ideal for repairing scrubbers, ash handling systems, pipe elbows, screens, and chutes.
• 30‑minute working time.
Test & Approvals: Chemical resistance was tested by immersion for 30 days at 75 °F, after 7 days room temperature cure
Adhesive Tensile Shear: 1,474 psi
Tensile Strength: 4,210 psi
Compressive Strength: 11,000 psi
Gap Fill: 3/4 in
Chemical Compound: Epoxy
Working Time: 30 min
Dielectric Strength: 340 V/mil
Packing Type: Kit

SKU	Capacity Vol.	Color
230-11490	30 lb	Grey

Wear Resistant Putty WR-2

Features:
• Bonds to steel, iron, aluminum, ceramic, concrete, brass, and some plastics.
Test & Approvals: Chemical resistance was tested by immersion for 30 days at 75 °F, after 7 days room temperature cure
Adhesive Tensile Shear: 2,200 psi
Tensile Strength: 4,300 psi
Compressive Strength: 9,800 psi
Gap Fill: 1/4 in
Working Time: 1 hr
Dielectric Strength: 400 V/mil

SKU	Chemical Compound	Capacity Vol.	Color
230-11410	Epoxy	1 lb	Dark Gray

Zip Patch™

Features:
• Hardens to a tough, durable waterproof finish in minutes.
• Excellent adhesion to iron, steel, stainless steel, titanium, fiberglass, aluminum, wood, ceramics, composites, acrylics, PVC, and most other plastics.
Test & Approvals: Chemical resistance was tested by immersion for 2 weeks at 42 °C after 7 days cure at 75 °F
Adhesive Tensile Shear: 2,400 psi
Tensile Strength: 10,000 psi
Dielectric Strength: 250 V/mil

SKU	Chemical Compound	Color
230-11500	Epoxy	Brown

Strong Steel Stick Renewal Composite

Features:
• Hardens like steel in 20 minutes.
• Permanently fill gaps & holes in metal, concrete, wood, fiberglass & ceramics.
• Can be used for underwater repairs.
Adhesive Tensile Shear: 800 psi
Tensile Strength: 900 psi
Compressive Strength: 8,000 psi
Chemical Compound: Epoxy
Dielectric Strength: 300 V/mil

SKU	Capacity Vol.	Color
428-60159	4 oz	Black; Gray

Heavy-Duty Adhesive Spray

Features:
• For temporary or permanent bonding of uneven or porous surfaces and weighted materials.
• Waterproof, flexible, transparent and nonstaining.
• Non‑ozone depleting.
Packing Type: Aerosol Can

SKU	Capacity Vol.	Color
019-1002035	12 oz	Clear

357 Premium Web Spray Adhesives

Features:
• Designed for temporary and permanent bonding.
• Creates strong bond for normal hard to bond surfaces.
• Fast skin, fast grab, low soak‑in.
Working Time: 1 min to 1 h
Packing Type: Aerosol Can

SKU	Capacity Vol.	Color
573-1421892	19.6 fl oz	Water White

ZipGrip® GPE 3 Cyanoacrylate Adhesives

Features:
• For repairing O‑rings, rubber weatherstripping, gaskets, and plastic parts.
• For fixturing parts.
• Permanently bonds metal to metals, rubber, and plastics.
Adhesive Tensile Shear: 2,500 psi
Gap Fill: 0.003 in
Chemical Compound: Cyanoacrylate
Working Time: Fixtures in seconds
Dielectric Strength: 295 V/mil
Packing Type: Bottle

SKU	Capacity Vol.	Color
230-70144	14 gm	Clear

ZipGrip® GPE 30 Cyanoacrylate Adhesives

Features:
• For repairing O‑rings, rubber weatherstripping, gaskets, and plastic parts.
• For fixturing parts.
• Permanently bonds metal to metals, rubber, and plastics.
• Fixtures in seconds on metal plastic and rubber.
Test & Approvals: A‑A‑3097, Type II, Class 1
Adhesive Tensile Shear: 3,200 psi
Gap Fill: 0.004 in
Chemical Compound: Cyanoacrylate
Working Time: Fixtures in seconds
Dielectric Strength: 11.6 kV/mm

SKU	Capacity Vol.	Color
230-70350	1 oz	Clear

Putty

Minute Mend™ Epoxy Putties

Features:
• Specially formulated to bond to both wet and dry surfaces and can be applied underwater.
• 2‑part epoxy putty packaged in a 1‑piece stick.
• Ready to use in less than one minute.
• Can be tapped, sawed, drilled, machined, stained, or painted.
Test & Approvals: Meets 1998 USDA guidelines for use in meat and poultry plants; Dielectric strength tested by ASTM D‑149
Specific Gravity: 1.98
Stress Resistance: 800 psi (tensile) ‑ 1,000 psi (tensile)
Hardness: 65.0 Shore D
Applications: Multi‑Purpose
Applicable Materials: Ceramic; Concrete; Fiberglass; Glass; Plastic; Steel; Wood; Aluminum
Full Cure Time @ Temp.: 24 h @ 77 °F
Dielectric Strength: 300.0 V/mil
Resistance: Ester; Alcohol; Ketone; Salt; Halogenated Hydrocarbon

SKU	Temp. Range	Color
125-14070	250.0 °F	Gray

Aluminum Putty F

Features:
• Aluminum‑filled epoxy putty for dependable non‑rusting repairs to aluminum castings, machinery, and equipment widely used in HVAC applications.
• Excellent resistance to chlorofluorocarbons.
• Bonds to aluminum and many other metals.
• Fills porosity in aluminum castings.
• Can be machined drilled or tapped using conventional metalworking tools.
• Qualifies under DOD‑C‑24176B/(SH), Type II.
• 60‑minute working time.
Test & Approvals: Chemical resistance was tested by immersion for 30 days at 75 °F, after 7 days room temperature cure; Qualified per MIL‑DOD‑C‑24176B.
Specific Gravity: 1.58
Hardness: 85.0 Shore D
Applications: Multi‑Purpose
Applicable Materials: Aluminum; Most Metals
Full Cure Time @ Temp.: 16 h @ 75 °F
Dielectric Strength: 100.0 V/mil
Resistance: Chlorinated Solvents; Hydrochloric Acid‑10%; Kerosene

SKU	Temp. Range	Color
230-10610	250.0 °F	Aluminum

Bronze Putty (BR)

Features:
• Bronze‑filled epoxy putty for repairing bronze and brass bushings, shafts, castings, and parts.
• Repairs and rebuilds areas where brazing would be undesirable or impossible.
• Bonds securely to bronze alloys, brass, copper, and ferrous metals.
• Uses conventional metalworking tools to machine, drill, tap, or grind.
• 35‑minute working time.
Test & Approvals: Chemical resistance was tested by immersion for 30 days at 75 °F, after 7 days room temperature cure
Specific Gravity: 2.23
Hardness: 85.0 Shore D
Applications: Bronze Parts/Equipment
Applicable Materials: Bronze; Most Metals
Full Cure Time @ Temp.: 16 h @ 75 °F
Dielectric Strength: 25.0 V/mil
Resistance: Ammonia; Kerosene; Sodium Hydroxide‑10%; Toluene

SKU	Temp. Range	Color
230-10260	250.0 °F	Bronze

Carbide Putty

Features:
• Silicone carbide‑filled epoxy putty for economical protection against wear and abrasion.
• Excellent abrasion resistance in aggressive industrial environments.
• Handles particulates less than 1/16.
• 50‑minute working time.
Test & Approvals: Chemical resistance was tested by immersion for 30 days at 75 °F, after 7 days room temperature cure
Specific Gravity: 1.7
Hardness: 85.0 Shore D
Applications: Multi‑Purpose
Applicable Materials: Most Metals
Full Cure Time @ Temp.: 16 h @ 75 °F
Dielectric Strength: 200.0 V/mil
Resistance: 1,1,1‑Trichloroethane; Ammonia; Gasoline (Unleaded); Potassium Hydroxide 40%; Sodium Hydroxide 50%; Sodium Hypochlorite; Toluene; Trisodium Phosphate

SKU	Temp. Range	Color
230-10050	250.0 °F	Grey

Ceramic Repair Putty

Features:
• Trowelable, alumina‑filled epoxy compound for rebuilding, smoothing, and protecting processing equipment exposed to corrosion, erosion, cavitation, chemicals and acids.
• Excellent for filling voids and rebuilding metal castings.
• 25‑minute working time.
• Qualifies under Mil Spec DOD‑C‑24176B(SH) Type I II.
Test & Approvals: Shear Strength Tested According to ASTM D1002; Cured Shrinkage Tested by ASTM D2566; Compression Strength Tested According to ASTM D695; Dielectric Strength Tested According to ASTM D149; Cured Hardness Tested According to ASTM D‑2240; Chemical Resistance was Tested by Immersion for 30 Days at 75 °F, After 7 Days Room Temperature Cure
Specific Gravity: 1.69
Hardness: 90.0 Shore D
Applications: Multi‑Purpose
Applicable Materials: Most Metals
Full Cure Time @ Temp.: 16 h @ 75 °F
Dielectric Strength: 370.0 V/mil
Resistance: Sodium Hypochlorite‑5%; Triosodium Phosphate‑5%; Trisodium Phosphate‑5%; Hydrochloric Acid‑10%

SKU	Temp. Range	Color
230-11700	350.0 °F	Dark Blue

Flexane® 80 Putty

Features:
• Trowelable urethane for repairing and lining process equipment exposed to wear, impact, abrasion, vibration, and expansion/contraction.
• Mixes easily and trowels on smoothly.
• Cures to a tough, medium‑hard rubber.
• Flexane® Primers are recommended for maximum adhesion to metal, rubber, and concrete surfaces.
• 20‑minute working time.
Test & Approvals: Dielectric strength tested according to ASTM D149; Tensile strength tested according to ASTM D412
Specific Gravity: 1.1 @ 77 °F
Hardness: 87.0 Shore A
Applications: Trowelable Repair
Applicable Materials: Concrete; Fiberglass; Most Metals; Rubber; Wood
Full Cure Time @ Temp.: 7 d @ 75 °F
Dielectric Strength: 350.0 V/mil
Resistance: Tear; Aluminum Sulfate 10%; Hydrochloric 36%; Potassium Hydroxide 40% Phosphoric 10%; Sodium Hydroxide 50%
Packing Type: Can

SKU	Temp. Range	Color
230-15820	120.0 °F; 180.0 °F	Black

Plastic Steel® 5 Minute® Putty (SF)

Features:
• Fast‑curing, steel‑filled epoxy for emergency repairs at temperatures as low as 40 °F.
• Cures to a tough, steel‑filled material.
• Can be machined, drilled, tapped, or sanded.
• 5‑minute working time.
Specific Gravity: 2.8
Hardness: 85.0 Shore D
Applications: Multi‑Purpose
Applicable Materials: Concrete; Most Metals
Full Cure Time @ Temp.: 1 h @ 75 °F
Dielectric Strength: 35.0 V/mil
Resistance: Kerosene; Ammonia; Water; Leaded Petrol; Saltwater
Packing Type: Kit

SKU	Temp. Range	Color
230-10240	200.0 °F	Dark Grey

Plastic Steel® Putty (A)

Features:
• The original metal‑filled epoxy putty.
• Used for hundreds of routine maintenance, production, and tooling applications.
• Bonds to most metals concrete and some plastics.
• Cures at room temperature and forms a tough durable metallic mass that can be drilled, tapped, machined, or painted.
• Excellent resistance to oil gasoline water and many chemicals.
• Ideal for patching and repairing areas where welding or brazing would be undesirable or impossible.
• 45‑minute working time.
Test & Approvals: Chemical resistance was tested by immersion for 30 days at 75 °F, after 7 days room temperature cure; MIL; Qualifies under DOD‑C‑24176B(SH), Type I
Specific Gravity: 2.8
Hardness: 85.0 Shore D
Applications: Multi‑Purpose
Applicable Materials: Concrete; Most Metals
Full Cure Time @ Temp.: 16 h @ 75 °F
Dielectric Strength: 30.0 V/mil
Resistance: Chlorinated Solvents; Hydrochloric Acid‑10%; Kerosene; Water; Leaded Petrol; Propylene Glycol; Mineral Spirits; Sulfuric Acid‑10%

SKU	Temp. Range	Color	Packing Type	Wt.
230-10110	250.0 °F	Dark Grey	Can	1.33 lb
230-10120	250.0 °F	Dark Grey	Kit	5.33 lb

Stainless Steel Putty (ST)

Features:
• Stainless steel‑filled epoxy putty for patching, repairing, and rebuilding stainless steel food processing equipment.
• Bonds to ferrous and non‑ferrous metals.
• Non‑rusting.
• NSF certified for potable water applications.
• Acceptable for use in meat and poultry plants.
• 58‑minute working time.
Test & Approvals: Chemical resistance was tested by immersion for 30 days at 75 °F, after 7 days room temperature cure; Certified for Potable Water Application
Specific Gravity: 3.1
Hardness: 85.0 Shore D
Applications: Multi‑Purpose
Applicable Materials: Stainless Steel
Full Cure Time @ Temp.: 16 h @ 75 °F
Dielectric Strength: 30.0 V/mil
Resistance: Chlorinated Solvents; Hydrochloric Acid‑10%
Packing Type: Can

SKU	Temp. Range	Color
230-10270	250.0 °F	Grey

Titanium Putty

Features:
• High‑tech, titanium‑reinforced epoxy putty for making repairs that can be precision machined.
• Resistance to chemicals and most acids, bases, solvents, and alkalis.
Test & Approvals: Qualifies under Mil Spec DOD‑C‑24176(SH) Type I & II
Color: Gray
Temp. Range: 350 °F
Applications: Multi‑Purpose

SKU	Specific Gravity	Hardness	Full Cure Time @ Temp.	Dielectric Strength	Packing Type
230-10760	2.5	87 Shore D	7 d @ 75 °F	56.0 V/m	Can
230-10770	2.36	87 Shore D	4 h @ 75 °F	56.0 V/mil	Tub

SEALING PRODUCTS

Caulk Guns

Caulking Guns

Features:
• Half‑barrel caulk gun with smooth rod and quick‑release mechanism.
• Suitable for light‑to‑medium applications of glazing, sealing or caulking.
• Holds most standard cartridges.

SKU	Thrust Ration
630-3984	10.1
630-3986	10.7
630-3985	7.1

Retaining Compounds

Bearing Mount for Close Fits

Features:
• Designed to bond non‑threaded, cylindrical metal assemblies by filling the voids between close‑fitting metal parts.
• Seal joints against leakage and prevents fretting and corrosion.
Color: Green
Gap Fill: 0.005 in
Temp. Range: ‑65 °F ‑ 300 °F
Shear Strength: 3,000 psi
Fix Cure Time @ Temp.: 10 min @ 72 °F
Full Cure Time @ Temp.: 24 h @ 72 °F
Curing Method: Anaerobic
Resistance: Diesel Fuel; Hydraulic Fluid; Leakage; Moisture; Vibration Loosening

SKU	Capacity Vol.	Packing Type
230-60950	50 ml	Bottle

Bearing Mount for Relaxed Fits

Features:
• Designed to bond non‑threaded, cylindrical metal assemblies by filling the voids between close‑fitting metal parts.
• Seal joints against leakage and prevents fretting and corrosion.
Test & Approvals: NSF
Color: Green
Gap Fill: 0.015 in
Temp. Range: ‑65 °F ‑ 300 °F
Shear Strength: 3,800 psi
Fix Cure Time @ Temp.: 10 min @ 72 °F
Full Cure Time @ Temp.: 24 h @ 72 °F
Curing Method: Anaerobic
Applications: Retaining
Resistance: Diesel Fuel; Hydraulic Fluid; Leakage; Moisture; Vibration Loosening

SKU	Capacity Vol.	Packing Type
230-68050	50 ml	Bottle

Sealants

Minimal Expanding Foam Sealants

Features:
• Designed to fill, seal, bond, retrofit, insulate, and deaden sound in and around cracks and cavities.
• Forms a permanent, waterproof and airtight bond to masonry, wood, glass, metal, and most plastics.
• Stops drafts, dust, moisture, insects and rodents.
• When cured, foam can be sanded, painted or stained.
• The low expansion formula expands 50% when fully cured.
• Cured foam insulates to R‑5 for each inch of foam.
• Foam and propellant are non‑flammable.
• Convenient 360º valve ‑ can be sprayed from any position.
Test & Approvals: UL
Temp. Range: ‑200 °F ‑ 200 °F
Color: Off‑White
Resistance: Waterproof; Airtight
Full Cure Time @ Temp.: 12 h @ 77 °F; 24 h @ 77 °F
Specific Gravity: 1.2
VOC: 2.9%, 35 g/L

SKU	Capacity	Packing Type
125-14077	12 oz	Aerosol Can

RTV Silicone Adhesive/Sealants

Features:
• Clear ‑ Forms a barely visible water‑tight seal.
• White ‑ Designed for high moisture, indoor/outdoor applications.
• Blue ‑ Heavy-duty industrial gasket sealant.
• Red ‑ High temperature, low odor, non‑corrosive gasket sealant.
• Seal, bond, waterproof and protect.
Test & Approvals: Meets MIL‑A‑46106B, Group 1, Type 1 when fully cured and washed; Meets ASTM C‑920 when fully cured and washed; Meets TT‑S‑001543A Class A when fully cured and washed; Meets CAN/CGSB‑19.13‑M82 when fully cured and washed; Meets FDA regulation 21 CFR 177.2600 when fully cured and washed; Meets TT‑S‑00230C Class A when fully cured and washed
Applications: Multi‑Purpose
Resistance: Water
Full Cure Time @ Temp.: 24 h @ 77 °F

SKU	Temp. Range	Color	Specific Gravity	VOC
125-14059	-45.0 °F - 450.0 °F	Red	1.42	0.5 lb/gal; 4.1 %; 56.0 g/L
125-14055	-65.0 °F - 450.0 °F	Clear	1.03	54 g/L

$ALEX PLUS® Acrylic Latex Caulks Plus Silicone (PC 18101)$

ALEX PLUS® Acrylic Latex Caulks Plus Silicone (PC 18101)

Features:
• Paintable.
• Easy water clean‑up.
Applications: Windows and Door Frames, Eaves, Baseboards, Pipes Molding, Vents, Siding and Trim, Corner Joint
Resistance: Water; Mold; Mildew
Full Cure Time @ Temp.: 24 h @ 77 °F
Specific Gravity: 1.69
VOC: 39.1 g/L

SKU	Capacity	Color
802-18152	10.1 oz	White

All-Purpose 100% Silicone Rubber Sealants

Features:
• Indoor/ Outdoor.
• Minimal shrinkage.
Applications: Around Windows and Doors; Siding and Trim; Gutters and Vents; Molding
Resistance: Water; Shrinkage; Temperature Extremes
Full Cure Time @ Temp.: 24 h @ 77 °F
Specific Gravity: 0.96
VOC: 28.8 g/L

SKU	Capacity	Color
802-08641	10.1 oz	Clear

KWIK SEAL® Kitchen & Bath Adhesive Caulks

Features:
• Paintable.
• Easy water clean‑up.
Applications: Tubs; Shower Stalls; Sinks; Repairing Loose Tiles; Backsplashes; Toilets; Other Cracks & Joints
Resistance: Water; Mold; Mildew
Full Cure Time @ Temp.: 36 h @ 77 °F
Specific Gravity: 1.6
VOC: 32.7 g/L

SKU	Capacity	Color
802-18001	5 1/2 oz	White

Maximum Temperature Thread Sealants

Features:
• Lubricates threads for easy assembly and disassembly.
• Won’t shred or wear like PTFE tape.
• High performance, solvent‑resistant sealant locks and seals metal, tapered pipe threads and fittings.
• Specifically formulated for aluminum, stainless steel, galvanized metal and other inert metals.
Test & Approvals: Mil‑Spec
Temp. Range: ‑65.0 °F ‑ 400.0 °F
Color: White
Applications: Thread
Resistance: Diesel Fuel, Hydraulic Fluid, Leakage, Moisture, Vibration Loosening
Full Cure Time @ Temp.: 24 h@ 72 °F
Specific Gravity: 1.02
VOC: 0.78%

SKU	Capacity	Packing Type
230-56750	50 ml	Tube

Silite® Silicone RTV

Features:
• Single‑component silicone for sealing panels and window plates.
• Bonding and sealing appliance ports.
• Attaching brackets, nameplates, and ceramic tile.
• NSF certified for food equipment and acceptable for use in meat and poultry plants.
Test & Approvals: Elongation and shear tensile strength tested according to ASTM D638; Dielectric strength tested according to ASTM D149; Meets TTS‑00230C; Meets TTS‑001543A; Meets MIL‑A‑46106A, Type I; Flash point measured by TCC; Meets USDA Specifications
Resistance: Weather; Chemicals
Full Cure Time @ Temp.: 7 d @ 77 °F
Specific Gravity: 1.04

SKU	Temp. Range	Color	Applications
230-17150	-60.0 °F - 450.0 °F	Clear	Panels; Window Plates; Appliance Ports; Brackets; Nameplates; Ceramic Tile; Gaskets
230-17130	-60.0 °F - 600.0 °F	Red	High-Temp Ducting; Ceramic Tile in Pulverizers; Form-In-Place Gaskets
230-17100	-60.0 °F - 450.0 °F	Clear	Panels; Window Plates; Appliance Ports; Brackets; Nameplates; Ceramic Tile; Gaskets

Cross-Check™ Torque Seal® Tamper-Proof Indicator Paste

Features:
• Provides a convenient visual method for identification of vibratory loosening or tampering in nuts, bolts, fasteners, and assemblies.
• Highly visible under ambient light and fluorescent under UV light.
• Tamper‑proof torque mark.
• Safe for most surfaces.
Temp. Range: ‑20 °F ‑ 400 °F
Applications: Identifying Loose Nuts, Bolts, Fasteners and Assemblies
Resistance: Tamper Proof
Full Cure Time @ Temp.: 1 to 2 hr

SKU	Capacity	Packing Type	Color
253-83318	0.05 lb	Tube	Blue
253-83315	0.05 lb	Tube	Green
253-83314	0.05 lb	Tube	Orange
253-83320	0.05 lb	Tube	Pink
253-83316	0.05 lb	Tube	Red
253-83319	0.05 lb	Tube	White
253-83317	0.05 lb	Tube	Yellow

PLS® 2 Premium Thread & Gasket Sealers

Features:
• Slow‑drying, soft‑setting, non‑toxic, brushable, without grit.
• Permeated with extra fillers to enhance sealing properties.
• Cures by solvent evaporation providing a durable, long‑lasting seal that can be easily disassembled.
Temp. Range: ‑100 °F ‑ 600° F
Applications: Threaded Fittings; Gaskets
Specific Gravity: 1.5

SKU	Capacity	Resistance
296-PB04	1/4 pt	Petroleum Fuels; Petroleum Solvents; Propane; Butane; LPG; Water; Cutting Oils

Soft-Set Thread Sealants

Features:
• Soft‑set, non‑toxic, PTFE paste.
• Remains pliable in cold temperatures.
• NOT for use on oxygen.
Test & Approvals: UL NSF CSA
Temp. Range: ‑100 °F ‑ 600 °F
Applications: Pipes; Joints; Fittings; Hoses
Specific Gravity: 1.53

SKU	Resistance	Full Cure Time @ Temp.	VOC
296-SS08	Gasoline; Kerosene; Petroleum solvents; Diesel fuel; Propane; Butane; Water; Cutting oils	24 h @ 68	27%
296-SS16	Gasoline; Petroleum; Solvents; Kerosene; Propane; Butane	24 hrs @ 50 °F	2.249 lbs/gal

Cold Weld Compounds

Features:
• Easy to use.
• Nontoxic.
• Made in the USA.
Specific Gravity: 1.9313
VOC: 0.1%

SKU	Temp. Range	Color	Applications	Resistance	Full Cure Time @ Temp.
803-8276	- 300 °F	Dark Gray	Will bond to virtually any clean, dry surface	Water; Petroleum; Acid; Chemical	4 h @ 70 °F
803-8265-S	- 500 °F	Dark Grey	Will bond to virtually any clean, dry surface	Water; Petroleum; Acid; Chemical	24 h @ 70 °F
803-8280	- 500 °F	Dark Grey	Repair Metal	Acid; Water; Solvent; Heat	24 h @ 70 °F

Water Weld Compounds

Features:
• WATERWELD can be applied underwater: surfaces to be repaired do not need to be clean and dry.
• “Mushrooms” through and around holes, grabbing the edges to hold securely, then hardening for a permanent seal.
Applications: Repairing Moist Surface and Underwater Applications Gas Tanks, Water and Fuel Cans, Pipe Repair, Ruptured Radiators, Pools and Spas, Gutters and Downspouts and Auto Body Repairs
Resistance: Underwater, Petro, Chemical, Acid-Resistant
Full Cure Time @ Temp.: 20 min

SKU	Temp Range	Color
803-8277	‑ 300 °F	Off White

Loc® Anaerobic Pipe Thread Sealants

Features:
• Anaerobic adhesive provides locking power.
• Ideal for threads in heavy vibration areas such as compressors and reciprocating equipment.
• Seals and locks in the absence of air.
• Do not use on Oxygen service.
• Use PTFE Tape or Oxytite®.
Test & Approvals: Classified by Underwriters Laboratories in USA
Applications: Thread, Compressor

SKU	Temp Range	Color
434-49050	‑65 °F ‑ 400 °F	White

Slic-Tite® Paste Thread Sealants w/ PTFE

Features:
• Do not use on Oxygen service.
• Use PTFE Tape or Oxytite® Paste.
• For sealing water, air, steam, natural gas, LP gas, refrigerants, ammonia, gasoline and oil.
Test & Approvals: USDA Approved for use in federally inspected meat and poultry plants; CSA; NSF; UL; ULC
Applications: Thread
Specific Gravity: 1.48

SKU	Capacity	Color	Temp. Range	Resistance
434-42029	1 pt	White	-50 °F -	Ammonia; Gas; Gasoline; Oil; Water
434-42019	1/2 pt	White	-50.0 °F -	Water, Gas, Ammonia, Gasoline, Oil
434-42009	1/4 pt	White	-50.0 °F -	Water, Gas, Ammonia, Gasoline, Oil

Anaerobic Flange Sealants

Features:
• Designed to eliminate movement on rigid assemblies.
• Seals and bonds flanges.
Applications: Gasketing
Resistance: Diesel Fuel; Hydraulic Fluid; Leakage; Moisture; Vibration Loosening
Full Cure Time @ Temp.: 12 h @ 72 °F
Specific Gravity: 1.1
VOC: <3%

SKU	Temp Range	Color
230-51531	‑65 °F ‑ 300 °F	Purple

Anaerobic Gasket Maker

Features:
• Designed to eliminate movement on rigid assemblies.
• High chemical resistance.
• Seals and bonds flanges.
Test & Approvals: NSF
Applications: Gasketing
Resistance: Diesel Fuel; Hydraulic Fluid; Leakage; Moisture; Vibration Loosening
Full Cure Time @ Temp.: 24 h @ 72 °F
Specific Gravity: 1.13
VOC: <3%

SKU	Temp Range	Color
230-51813	‑65 °F ‑ 300 °F	Red

Black RTV Silicone Adhesive Sealants

Features:
• Waterproof and flexible.
• Non‑paintable.
Applications: Seals; Bonds; Repairs; Mends; Secures
Resistance: Oil; Water; Weather; Vibration; Grease
Full Cure Time @ Temp.: 24 h @ 72 °F
Specific Gravity: 1.07

SKU	Temp Range	Color	VOC
230-81173	‑75.0 °F ‑ 450.0 °F	Black	<4%

Clear RTV Silicone Adhesive Sealants

Features:
• May be applied to horizontal or vertical surfaces.
• Waterproof and flexible.
Temp. Range: ‑75 °F ‑ 400 °F
Color: Clear
Applications: Seals; Bonds; Repairs; Mends; Secures
Resistance: Oil; Water; Weather; Vibration; Grease
Specific Gravity: 1.01

SKU	Capacity	Packing Type	Full Cure Time @ Temp.	VOC
230-80855	11 oz	Cartridge	24 h @ 72 °F	30 g/l
230-80050	3 oz	Tube	24 h @ 72 °F	30 g/l
230-85913	7 1/4 oz	PowerBead™ Can	24 h	<3%

Form-A-Gasket® Sealants

Features:
• Brush‑top sealant approved for use in aviation as well as automotive applications.
• Provides an excellent seal to protect against leakage.
Test & Approvals: Conforms to Mil‑S‑45180 D, Type II
Temp. Range: ‑65 °F ‑ 400 °F

SKU	Resistance	Full Cure Time @ Temp.	Specific Gravity	VOC
230-80015	Gasoline; Motor Oil; Seawater; Transmission Fluid; Water	24 h	1.5	11%
230-80011	Water; Gasoline; Oil; Grease	24 h @ 72 °F	1.5	12.7%
230-80003	Gasoline; Motor Oil; Seawater; Transmission Fluid; Water	24 h	1.5	13.5%
230-80017	Water; Gasoline; Oil; Grease	24 h @ 72 °F	1.1	22.2%
230-80016	Gasoline; Motor Oil; Seawater; Transmission Fluid; Water	24 h	1.5	11%

High Performance Thread Sealants

Features:
• Cures rapidly to withstand 10,000 PSI.
• Prevents galling and protects mated threaded areas from rust and corrosion.
• Reliably seals metal, tapered pipe thread fittings.
Resistance: Diesel Fuel, Hydraulic Fluid, Leakage, Moisture, Vibration Loosening
Full Cure Time @ Temp.: 24 h @ 72 °F
Specific Gravity: 1.05‑1.15
VOC: 2.50%

SKU	Temp Range	Color
230-56521	‑65.0 °F ‑ 300.0 °F	White

High Temperature Thread Sealants

Features:
• Lubricates threads for easy assembly and disassembly.
Applications: Oil and Coolant Lines; Fuel Fittings; Rear axle fill plug; Brake and power steering fittings; Head bolts into through holes
Resistance: Leakage, Vibration Loosening, Moisture, Hydraulic Fluid, Diesel Fuel
Full Cure Time @ Temp.: 24 h @ 72 °F
Specific Gravity: 1.21
VOC: <3%

SKU	Temp Range	Color
230-59235	‑65.0 °F	White

High-Temp Red RTV Silicone Gasket

Features:
• Replaces almost any cut gasket by making reliable “formed‑in‑place” gaskets that resist cracking, shrinking and migrating caused by thermal cycling.
Applications: High‑Temp Mechanical Assemblies
Resistance: Aging; Weathering; Thermal Cycling
Full Cure Time @ Temp.: 24 h @ 72 °F
Specific Gravity: 1.05
VOC: 30 g/L

SKU	Temp Range	Packing Type	Color
230-81409	‑65.0 °F ‑ 650.0 °F	Cartridge	Red
230-81160	‑65.0 °F ‑ 650.0 °F	Tube	Red
230-81915	‑65.0 °F ‑ 650.0 °F	Automatic Tube®	Red
230-85915	‑65.0 °F ‑ 650.0 °F	PowerBead™ Can	Red

Pipe Joint Compounds

Features:
• Lubricates and seals threaded joints on water, oil and fuel lines.
• No longer available for sale in California due to CA VOC requirements, replacements are 61616 and 61716.
Resistance: Common Shop Fluids
Full Cure Time @ Temp.: 24 h @ 72 °F
Specific Gravity: 1.12
VOC: 14.2%

SKU	Temp Range	Applications	Color
230-80045	‑65.0 °F ‑ 400.0 °F	Water/Steam/Oil/Fuel Lines	Black

Pneumatic/Hydraulic Sealants

Features:
• Contains no fillers or particles which could contaminate system fluids, foul valves or clog fine filters and screens.
• Designed for locking and sealing high pressure hydraulic and pneumatic systems.
Resistance: Diesel Fuel; Hydraulic Fluid; Leakage; Moisture; Vibration Loosening
Full Cure Time @ Temp.: 24 h @ 72 °F
Specific Gravity: 1.2
VOC: <4%

SKU	Temp Range	Applications	Color
230-54550	‑65.0 °F ‑ 300.0 °F	Pneumatic/Hydraulic	Bottle

Sensor-Safe Blue RTV Silicone Gasket

Features:
• The original Permatex blue makes reliable “formed‑in‑place” gaskets that resist shrinking, cracking and migrating.
• Product cures to a strong, flexible rubber that seals flanges against leakage and resists oil and other shop fluids.
Temp. Range: ‑65 °F ‑ 500 °F

SKU	Resistance	Full Cure Time @ Temp.	Specific Gravity	VOC
230-80628	Aging; Thermal Cycling; Weather	24 h	1.44	<3%; <43 g/l
230-80022	Shrinking; Cracking; Migrating	24 h @ 72 °F	1.04	<4%
230-81860	Heat; Weather	24 h	1.44	<4%

The Right Stuff® Gasket Maker

Features:
• Heavy‑bodied, elastomeric rubber provides instant seal.
• Superior flexibility and adhesion accommodates joint movement.
• Instant low pressure seal.
Resistance: Oil; Transmission Fluid

SKU	Temp. Range	Full Cure Time @ Temp.	Specific Gravity	VOC
230-33694	-75 °F - 450 °F	15 min @ 23±2 °C; 50±5% RH	1.34	<3%
230-85224	-75 °F - 450 °F	15 min @ 23±2 °C; 50±5% RH	1.34	<3%
230-25224	-75 °F - 500 °F	24 h @ 72 °F	1.31	<4%

Thread Sealants w/ PTFE

Features:
• Seals and resists pressure in air, oil, diesel fuel and hydraulic systems.
• Remains pliable at high and low temperatures.
Resistance: Common Shop Fluids
Specific Gravity: 1.12
VOC: 37.9%

SKU	Temp Range	Applications	Color
230-80633	‑65.0 °F ‑ 300.0 °F	Air/Oil/Gas/Hydraulic	White
230-80632	‑65.0 °F ‑ 300.0 °F	Air/Oil/Gas/Hydraulic	White

Ultra Series® RTV Silicone Gasket Maker

Features:
• Resists aging, weathering and thermal cycling without hardening, shrinking or cracking.
• Forms a superior bond on oil contaminated metals and maintains outstanding oil resistance.
Test & Approvals: Meets Performance Specs of OE Silicone Gaskets

SKU	Temp. Range	Color	Full Cure Time @ Temp.	Specific Gravity	VOC
230-24105	-65 °F - 500 °F	Black	24 h @ 72 °F	1.26	<4%
230-81725	-65 °F - 500 °F	Blue	24 h @ 72 °F	1.3	<4%
230-82195	-65 °F - 500 °F	Grey	24 h	1.47	<2%
230-82194	-54 °F - 260 °F	Grey	24 h @ 72 °F	1.5	<2%
230-81878	- 700 °F	Copper	24 h @ 72 °F	1.05	7.8%
230-82180	-65 °F - 500 °F	Black	24 h @ 72 °F	1.26	<4%
230-81724	-65 °F - 500 °F	Blue	24 h @ 72 °F	1.3	<4%
230-82080	-65 °F - 500 °F	Black	24 h @ 72 °F	1.35	3.8%
230-85080	-65 °F - 500 °F	Black	24 h @ 72 °F	1.26	<4%

No. 5® Pipe Thread Sealants

Features:
• Soft‑set, slow drying compound which seals, lubricates and protects threaded pipe and fittings.
• Ideal for application with a wide variety of fluids and gases, including potable water application.
• Use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, reinforced fiberglass, PVC and CPVC pipes.
Temp. Range: ‑15.0 °F ‑ 400.0 °F
Color: Yellow
Applications: Threaded Galvanized Steel; Iron; Brass; Copper; Aluminum; Stainless Steel; Polyethylene; Reinforced Fiberglass
Resistance: Moisture; Dirt; Dust
Full Cure Time @ Temp.: 24 h @ 77 °F
Specific Gravity: 1.38
VOC: 23%; 317 g/L

SKU	Capacity	Packing Type	Wt.
622-25431	1 pt	Can	37.72 lb
622-25300	1 qt	Can	0.18 lb
622-25551	1/2 pt	Can	1.48 lb
622-25631	1/4 pt	Can	2.74 lb

No. 5® Special Pipe Thread Sealants

Features:
• For use where a low odor sealant with low temperature application is required.
• Non‑staining, soft set compound specifically formulated for use on gas piping or when gas detection equipment is used.
• Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe.
Test & Approvals: Conforms to TT‑S‑1732
Temp. Range: ‑15.0 °F ‑ 400.0 °F
Color: Yellow
Applications: Threaded Galvanized Steel; Iron; Brass; Copper; Aluminum; Stainless Steel; Polyethylene; Reinforced Fiberglass; PVC
Resistance: Moisture; Dirt; Dust
Full Cure Time @ Temp.: 24 h @ 77 °F
Specific Gravity: 1.4
VOC: 16%; 160 g/L
Wt.: 3.1 lb

SKU	Capacity	Packing Type
622-26431	1 pt	Can

No. 7 Pipe Thread Sealants

Features:
• Medium‑dry, soft‑set sealant designed for use with lines carrying corrosive chemicals including acids, caustics, alcohol, ethylene glycol, gasoline, and ammonia.
• Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, and stainless steel pipe.
Test & Approvals: Conforms to AMS‑S‑7916 and TT‑S‑1732
Temp. Range: ‑50.0 °F ‑ 450.0 °F
Color: Black
Applications: Threaded Galvanized Steel; Iron; Brass; Copper; Aluminum; Stainless Steel
Resistance: Moisture; Dirt; Dust
Full Cure Time @ Temp.: 24 h @ 77 °F
Specific Gravity: 1.46
VOC: 28%; 280 g/L

SKU	Capacity	Packing Type
622-17432	1 pt	Can

T Plus 2® Pipe Thread Sealants

Features:
• May be pressurized immediately following application.
• Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC and ABS pipe.
• Non‑setting multi‑purpose compound which contains PTFE, plus synthetic fibers to create a stronger seal.
Test & Approvals: Conforms to TT‑S‑1732
Temp. Range: ‑15.0 °F
Color: White
Applications: Threaded Galvanized Steel; Iron; Brass; Copper; Aluminum; Stainless Steel; Polyethylene; Reinforced Fiberglass; PVC; CPVC; ABS Pipe
Resistance: Moisture; Dirt; Dust

SKU	Capacity	Packing Type	Full Cure Time @ Temp.	Specific Gravity	VOC
622-23431	1 pt	Can	24 h @ 77 °F	1.32	0%
622-23551	1/2 pt	Can	24 h @ 77 °F	1.32	0%

Tru-Blu™ Pipe Thread Sealants

Features:
• For refrigeration and industrial applications.
Test & Approvals: Conforms to TT‑S‑1732
Color: Blue
Resistance: Moisture; Dirt; Dust
Specific Gravity: 1.38

SKU	Temp. Range	Full Cure Time @ Temp.	VOC
622-31431	-50.0 °F - 350 °F	24 h @ 77 °F	23%; 230 g/L
622-31300	-50.0 °F - 350 °F	24 h @ 77 °F	23%; 230 g/L
622-31551	-50.0 °F - 350 °F	24 h @ 77 °F	23%; 230 g/L
622-31631	20 - 400	—	23%

Polyurethane Triple Expanding Foam

Features:
• Seals, bonds, and insulates, filling large and small holes in ceilings, floorboards, concrete or cinder block walls, and around ducts, cables, plumbing areas, and central heating pipes.
Test & Approvals: UL
Applications: Window and door frames; Pipes; Electrical Outlets; Vents; Foundations
Resistance: Waterproof
Specific Gravity: 1.1

SKU	Temp Range	Full Cure Time @ Temp	Color	VOC
630-0909	55° F ‑ 90° F	24 h @ 77° F	Champagne	< 20%
630-0912	55° F ‑ 90° F	24 h @ 77° F	Champagne	< 20%

RD PRO® Heat-Resistant RTV Sealants

Features:
• High‑performance industrial sealing and glazing compound that is ideal for use in most OEM and maintenance applications.
• Offers excellent adhesion to most non‑porous building substrates and remains permanently elastic.
Test & Approvals: TT‑S; ASTM; FDA; MIL
Temp. Range: ‑60° F ‑ 500° F
Applications: Oven Belts; Heating Elements in Appliances; Flanged Pipe Joints; Fired Heaters; Access Doors; Drying Vents
Resistance: Chemicals; Heat; Water; Weather
Specific Gravity: 1.02

SKU	Full Cure Time @ Temp	Color	VOC
630-0809/OI	24 h @ 77° F	Red	<3%

RD PRO® Industrial Grade RTV Sealants

Features:
• High performance sealing and glazing compound that is ideal for use in most OEM and maintenance applications.
• Forms a strong, durable and weather‑resistant seal and provides excellent adhesion to most non‑porous surfaces.
Test & Approvals: TT‑S; ASTM; FDA; MIL
Resistance: Weather; Water; Chemicals; Mildew

SKU	Temp. Range	Color	Full Cure Time @ Temp.	Specific Gravity	VOC
630-0816/OI	-60° F - 400° F	White	24 h @ 77° F	1.02	< 3%
630-0816/6I	-60 °F - 400 °F	Black	24 h @ 77 °F	1 - 1.1	<3%; <40 g/L
630-0816/5I	-60 °F - 400 °F	Gray	24 h @ 77 °F	1 - 1.1	<3%; <40 g/L
630-0826/OI	-60° F - 400° F	Clear	24 h @ 77° F	1.02	< 3%
630-0820	-60° F - 400° F	Clear	24 h @ 77° F	1.02	< 3%
630-0810	-60° F - 400° F	White	24 h @ 77° F	1.02	< 3%

RTV Silicone Sealants

Features:
• Chemically stable and shows little change in physical properties after exposure to sunlight, rain, snow, ozone, temperature extremes and weathering.
• A one‑part ready to use material that shows little change in gunnability at temperatures from ‑80 °F (‑62 °C) to 140 °F (60 °C) permitting the sealant to be applied in any season.
• Can be used for extended periods at temperatures up to 450 °F (232 °C) and for shorter periods at temperatures as high as 500 °F (260 °C).
• Mildew‑resistant.
Color: Clear

SKU	Capacity	Packing Type
425-S00010000	8 oz	Aerosol Can

Contractor RTV Silicone Sealants

Features:
• Interior/Exterior, flexible watertight silicone sealant made with 100% silicone.
• Minimal shrinkage, great for around windows/doors, plumbing, and water pipes.
Temp. Range: ‑49 °F ‑ 302 °F
Specific Gravity: 0.96

SKU	Color	Resistance	Full Cure Time @ Temp.	VOC
425-WL099110C	Clear	Moisture; Air; Dust; Dirt	24hr @ 77°F	0.03
425-WL099112W	White	Air; Dirt; Dust; Moisture	—	0.03

Silicone Rubber All Purpose Sealants

Features:
• Highly flexible and non‑shrinking 100% silicone sealant offers outstanding protection against water and weather damage.
• Durable and flexible sealant is suited for areas exposed to heavy wear and harsh elements.
• Commonly applied at windows, doors, trim, siding and in many other general purpose applications.
Resistance: Mildew; Moisture
Specific Gravity: 1.06
VOC: 30 g/l

SKU	Full Cure Time @ Temp	Applications	Color
425-W11124510	24 h	General Purpose	Aluminum
425-W11121010	2h h	General Purpose be	Clear

Stop Gap!® Insulation Foam

Features:
• Can be used to seal and insulate around windows and door frames.
• Dries tack free in 30 minutes.
• Cured product hardens and can be trimmed, shaped, sanded, painted, or stained.
Cure Time: 8 h

SKU	Temp Range	Packing Type
425-WL3333300	60.0 °F ‑ 100.0 °F	Aerosol Can

Threadlockers

Medium Strength Blue Threadlockers

Features:
• All‑purpose, medium strength threadlocker is an excellent choice for everyday use.
• Ideal for all nut and bolt applications 1/4 inch to 3/4 inch (6mm to 20mm).
Test & Approvals: NSF P1
Thread Size: 1/4 in ‑ 3/4 in
Temp. Range: ‑65 °F ‑ 300 °F
Curing Method: Anaerobic
Resistance: Diesel Fuel; Hydraulic Fluid; Leakage; Moisture; Vibration Loosening

SKU	Fix Cure Time @ Temp	Color
230-24210	20 min @ 72 °F	Blue

Permatex® High Strength Red Threadlocker

Features:
• Designed for securing parts that must withstand heavy shock, vibration, or extreme chemical or environmental conditions.
• Suitable for permanently locking studs.
Thread Size: 1/4 in ‑ 3/4 in
Temp. Range: ‑65 °F ‑ 300 °F
Applications: Cylinder Block; Rocker Arm Studs; Ring Gear Bolts; Frame Bolts; Frame Brackets; Hydraulic Press Studs
Curing Method: Anaerobic
Resistance: Chemical/Solvent; Rust/Corrosion

SKU	Capacity Vol.	Packing Type
230-27110	10 ml	Bottle

Permatex® Permanent Strength Red Threadlocker

Features:
• Permanent, high‑strength threadlocker directly applied to fasteners ranging from 3/8” to 1”.
• Designed for securing parts that must withstand heavy shock, vibration, or extreme chemical or environmental conditions.
Temp. Range: ‑65 °F ‑ 300 °F
Applications: Heavy Equipment Bolts; Suspension Bolts; Gear Bolts; Railroad Assemblies; Construction Equipment; Transmission Shaft Bolts
Resistance: Chemical/Solvent; Rust

SKU	Capacity Vol.	Packing Type
230-26210	10 ml	Bottle

High Strength Red Threadlockers

Features:
• Superior to conventional lock washers, nylon inserts and other mechanical devices as Permatex Threadlockers secure the entire fastener assembly against loosening from shock or vibration and they maintain fastener clamp forces.
Test & Approvals: NSF
Thread Size: 3/8 in ‑ 1 in
Temp. Range: ‑65 °F ‑ 300 °F
Curing Method: Anaerobic
Resistance: Diesel; Hydraulic Fluid; Leakage; Moisture; Vibration Loosening

SKU	Capacity Vol.	Packing Type	Fix Cure Time @ Temp.	Wt.
230-27010	10 ml	Squeeze Tube	15.00 min @ 72 °F	0.11 lb
230-27150	50 ml	Bottle	20.00 min @ 72 °F	0.22 lb

Medium Strength Blue Threadlockers

Features:
• Sturdy, medium‑strength threadlocker provides superior service, as compared to conventional lock washers, nylon inserts and other mechanical devices.
• Locks and seals while preventing parts from loosening due to vibration.
Resistance: Leakage; Vibration Loosening; Moisture; Diesel Fuel; Hydraulic Fluid

SKU	Temp Range	Curring Method	Thread Size	Fix Cure Time @ Temp.
230-24010	‑65 °F ‑ 300 °F	Anaerobic	1/4 in - 1 in	15 min @ 72 °F
230-24250	‑65 °F ‑ 300 °F	Anaerobic	1/4 in - 3/4 in	20 min @ 72 °F

Permanent Strength Red Threadlockers

Features:
• Superior to conventional lock washers, nylon inserts and other mechanical devices as Permatex Threadlockers secure the entire fastener assembly against loosening from shock or vibration and they maintain fastener clamp forces.
Test & Approvals: NSF, Mil‑Spec
Temp. Range: ‑65 °F ‑ 300 °F
Curing Method: Anaerobic
Resistance: Diesel; Hydraulic Fluid; Leakage; Moisture; Vibration Loosening

SKU	Thread Size	Fix Cure Time @ Temp.
230-26250	3/8 in ‑ 1 in	20 min @ 72 °F

TAPE PRODUCTS

Duct Tapes

Extra Heavy Duty Duct Tape

Features:
• Consists of polyethylene film over a dense cloth scrim with an aggressive rubber adhesive used for demanding duct tape applications.
Width: 1.88 in
Length: 60 yd
Thickness: 10.7 mil
Adhesion to Steel: 61 oz/in

SKU	Series	Tensile Strength	Temp Range
405-051131-06969	6969	32 lb/in	200° F

Duct Tapes 3900

DFeatures:
• Sturdy polyethylene backing resists moisture, prolonging the tape bond in moist or humid environments.
• Low tack roll edges make the tape easier to unwrap and keeps edges cleaner for less surface contamination and wasted tape.
Width: 1.88 in
Length: 60 yds
Thickness: 7.7 mil
Adhesion to Steel: 56 oz/in

SKU	Type	Tensile Strength	Temp Range
405-051131-06976	General Purpose	22 lb/in	200° F

Performance Plus Duct Tapes 8979

Features:
• Leaves behind no sticky residue to clean up.
• Sunlight/UV and Water-Resistant.

SKU	Length	Width	Thickness
405-021200-56468	2 in	6.78 in	12.6 mil

Silver Duct Tapes 3939

Features:
• Tears easily straight across and down without curling.
• Tack‑free edges.
• Surface can be written on.
Test & Approvals: Meets UL723, HUD, BOCA Codes
Adhesion to Steel: 55 oz/in
Tensile Strength: 25 lb/in
Type: Heavy‑Duty

SKU	Length	Width	Thickness	Color
405-051131-06975	55 m	48 mm	9 mil	Silver

Vinyl Duct Tape 3903

Features:
• Solve your sticky situations ‑ vinyl duct tape with a rubber adhesive sticks well to many substrates.
• Convenient tape unwinds easily off the roll.
• Embossed vinyl backing for easy tear‑by‑hand.
• Conforms well to irregular surfaces.
Width: 2 in
Length: 50 yd
Adhesion to Steel: 15.4 oz/in
Tensile Strength: 12.6 lb/in
Type: General Purpose

SKU	Series	Color	Thickness	Temp. Range	Wt.
405-051131-06984	3903	Gray	6.3 mil	200° F	0.95 lb
405-051131-06992	3903	Red	6.3 mil	200°F	2 1/2 lb
405-051131-06981	3903	White	6.5 mil	200° F	0.95 lb
405-051131-06982	3903	Yellow	6.5 mil	200° F	0.95 lb

AC10 Duct Tape

Features:
• Polyester (PET) cloth/polyethylene (PE) film with an aggressive pressure sensitive natural rubber adhesive combines to provide a quality utility product.
• Conformable to irregular surfaces.
Thickness: 7 mil
Tensile Strength: 17 lb/in

SKU	Color	Width	Length
761-91406	Silver	48 mm	50.2 m

AC20 Duct Tape

Features:
• One hundred percent Dacron® cloth/polyethylene (PE) film with an aggressive pressure‑sensitive natural rubber adhesive combines to provide a quality utility product.
• Consistent tensile and even tear in both cross and machine direction.
• Excellent conformability to irregular surfaces.
Type: General Purpose

SKU	Color	Width	Length	Thickness	Adhesion to Steel	Tensile Strength
761-74977	Silver	2 in	60 yd	9 mil	54 oz/in	19 lb/in
761-91410	Silver	48 mm	54.8 m	9 mm	40 oz/in	18 lb/in

AC36 HVAC Cloth Duct Tapes

Features:
• General contractor’s duct tape of choice.
• PE coated cloth tape with an aggressive system designed to provide exceptional shear strength for demanding applications, such as HVAC, abatement, weatherproofing, extermination, flex duct connections and all general maintenance needs.
Test & Approvals: UL723 rated, meets HUD and BOCA codes
Width: 48 mm
Length: 54.8 m
Thickness: 11 mil
Temp. Range: 90° F
Tensile Strength: 20 lb/in

SKU	Series	Color
761-4137	AC36 HVAC Cloth Duct Tape	Silver

Utility Grade Dacron® Cloth/PE Film Duct Tapes

Features:
• AC20’s aggressive natural rubber adhesive adheres well to a wide variety of surfaces and offers a broad temperature range.
• Polyethylene (PE) coated cloth tape with an aggressive pressure‑sensitive natural rubber adhesive for improved adhesion and shear properties.
• One hundred percent Dacron® cloth/polyethylene (PE) film with an aggressive pressure‑sensitive natural rubber adhesive combines to provide a quality utility product.
• Excellent conformability to irregular surfaces.
Length: 54.8 m

SKU	Width	Thickness	Tensile Strength
761-83689	48 mm	8 mil	18 lb/in

Utility Grade Duct Tapes

Features:
• All‑purpose duct tape that is perfect for general maintenance applications such as wrapping and sealing, weatherproofing, binding and bundling.
• Conforms to irregular shapes.
Thickness: 7.5 mil
Tensile Strength: 17 lb/in

SKU	Color
761-87372	Silver

Utility Grade PET/PE Duct Tapes

Features:
• Polyester (PET) cloth / polyethylene (PE) film with an aggressive natural rubber pressure sensitive adhesive provides a quality utility product.
• Conformable to irregular surfaces.

SKU	Tensile Strength
761-91411	20 lb/in

2280 General Purpose Duct Tapes

Features:
• Easy‑tear cloth provides clean, consistent tear by hand.
• Ideal for multiple household, contractor, and maintenance uses.
• Natural rubber adhesive bonds to a wide variety of surfaces.
• Flexible PE cloth backing conforms well to irregular surfaces and shapes.
• Moisture resistant.
Width: 55m
Length: 48mm
Temp. Range: 200° F
Adhesion to Steel: 70 oz/in

SKU	Series	Color	Tensile Strength	Thickness
573-1087206	2280	Black	24 lb/in	9 mil
573-1087205	2280	Red	24 lb/in	9 mil
573-1087144	2280	Silver	24 lbs/in	9 mil

307 Utility Grade Duct Tapes

Features:
• Polyethylene coated cloth tape.
• Superior bonding for maintenance and general repair, sealing, bundling, patching and mending.
• Resists twisting and curling.
Width: 48 mm
Thickness: 7 mil
Temp. Range: 200° F
Adhesion to Steel: 65 oz/in

SKU	Series	Color	Length	Tensile Strength
573-1087253	307	Silver	27 m	—
573-1087239	307	Silver	55 m	22 lbs/in

Multi-Purpose Duct Tapes

Features:
• Adheres to a wide variety of surfaces.
• Conforms well to irregular surfaces.
• Tears straight, hangs straight, curl resistant.
Temp. Range: 200 °F

SKU	Series	Color	Width	Length	Thickness	Adhesion to Steel	Tensile Strength
573-1086174	396	Silver	2 in	60 yd	10 mil	49 oz/in	23 lb/in
573-1086769	394	Silver	2 in	60 yd	8.5 mil	40 oz/in	19 lb/in
573-1086184	398	Silver	4 in	60 yd	11 mil	49 oz/in	23 lb/in
573-1086201	398	Black	48 mm	55 m	11 mil	49 oz/in	26 lb/in
573-1086178	398	Silver	48 mm	55 m	11 mil	49 oz/in	26 lb/in

Premium Duct Tapes

Features:
• Preferred by professional contractors who demand a consistent, trouble‑free product.
• Outstanding performance over wide range of temperatures.
• Superior tensile strength.
Temp. Range: 200° F
Adhesion to Steel: 50 oz/in

SKU	Series	Color	Width	Length	Thickness	Tensile Strength
573-1086150	357	White	2 in	60 yd	13 mil	43 lb/in
573-1086157	357	Olive Drab	3 in	60 yd	13 mil	43 lb/in
573-1086141	357	Silver	48 mm	55 m	13 mm	50 lb/in

General Purpose Duct Tapes

Features:
• Handles easily, conforms well to irregular surfaces ‑ will not twist or curl during application.
• Good tensile strength, adhesion, and tack.
• General purpose polyethylene coated cloth tape.
Test & Approvals: Meets UL 723
Length: 60 yd
Adhesion to Steel: 50 oz/in
Tensile Strength: 25 lb/in

SKU	Series	Color	Width	Temp. Range	Thickness
573-1086702	203	Black	2 in	200° F	9 mil
573-1086566	203	Red	2 in	200° F	9 mil
573-1086555	203	Silver	2 in	200 °F	9 mil
573-1086567	203	White	2 in	200° F	9 mil
573-1086556	203	Silver	3 in	200° F	9 mil

Multi-Purpose Duct Tapes

Features:
• Good adhesion and tack.
• Conformable and will not twist or curl during application.
• Excellent adhesion to poly sheeting.
• Natural rubber adhesive bonds strong to surfaces and leaves minimal residue.
• PE Coated cloth backing for strength, conformability, and moisture resistance.
Test & Approvals: Meets UL 723
Length: 60 yd
Temp. Range: 200 °F
Adhesion to Steel: 60 oz/in
Tensile Strength: 25 lb/in

SKU	Series	Color	Width	Thickness
573-1086550	223	Silver	2 in	10 mil
573-1086552	223	Silver	4 in	10 mil

General Purpose Duct Tapes

Features:
• To package, patch, seal, hold, color code, splice, seam, protect, bundle: HVAC, plumbing, carpet and asbestos abatement applications.
• Ideal for packaging, patching, sealing, holding, color coding, splicing, seams, protecting, bundling: HVAC, plumbing, carpeting and asbestos abatement applications.
• 12 month shelf life if stored in a cool, dry area away from sunlight and heat.
Length: 60 yd
Temp. Range: 200 °F
Adhesion to Steel: 45 oz/in
Tensile Strength: 22 lb/in

SKU	Series	Width	Thickness	Color
689-PC-600-2-ORANGE	PC 600	2 in	9 mil	Orange

Industrial Grade Duct Tapes

Features:
• Quality Medium Grade Duct Tape designed to work for demanding applications.
• Sticks to nearly any surface.
Type: Poly‑Coated Contractor Grade
Length: 60 yd
Adhesion to Steel: 55 oz/in

SKU	Width	Temp. Range	Thickness	Tensile Strength
744-64662-09001-00	2 in	< 199 °F	9 mil	24 lb/in

Professional Grade Heavy-Duty Duct Tapes

Features:
• Heavy-duty duct tape with an aggressive adhesive for demanding contractor applications.
• Strong tape that is still easily hand tearable.
Series: Professional Grade
Type: Natural Rubber
Length: 60 yd
Adhesion to Steel: 70.34 oz/in

SKU	Thickess	Temp.Range	Tensile Strength	Width
744-64663-09005-00	12 mil	199 °F	45.07 lb/in	2 in

Utility Grade Duct Tapes

Features:
• General Purpose duct tape.
• Easy hand‑tearability and strong adhesion to stick to a variety of different surfaces.
Width: 2 in
Length: 60 yd
Thickness: 7.5 mil
Adhesion to Steel: 45 oz/in
Tensile Strength: 22 lb/in

SKU	Color	Temp. Range	Type
744-64613-09006-00	Black	—	—
744-64613-09001-00	Silver	< 199 °F	High-Shear, High Tensile Poly-Coated Cloth Tape

Electrical Tapes

Scotch® Vinyl Electrical Color Coding Tapes 35

Features:
• Designed for use in phase identification, color coding of motor leads and piping systems and for marking safety areas.
• Has excellent electrical insulating properties, wraps smoothly, conforms well and holds over a wide range of temperatures.
• Inhibits corrosion of electrical conductors.
Test & Approvals: UL Listed, UL 510 Standard “Insulating Tape” (product category OANZ), file E129200; CSA Certification, Standard C22.2 No. 197‑M1983 “PVC Insulation Tape”, File LR 48769
Material: Polyvinyl Chloride (PVC) Backing

SKU	Length	Width	Thickness
500-108443	66 ft	3/4 in	7 mil

Highland™ Vinyl Commercial Grade Electrical Tapes

Features:
• Highland vinyl electrical tape is a flame‑retardant, conformable, general purpose, insulation tape.
• Primary electrical insulation for all wire and cable splices rated up to 600 volts.
• Highland tape can be used for protective jacketing and harnessing.
Test & Approvals: UL Listed, File E129200

SKU	Length	Width	Thickness
500-167204	66 ft	3/4 in	7 mil

Scotch® Glass Cloth Electrical Tapes 27

Features:
• Is a woven glass cloth tape designed to operate in 600‑volt dry applications, requiring high mechanical strength and resistance to high temperatures.
• The glass cloth is specially treated and prepared to provide corrosion‑free protection.
• It will not shrink, rot, or burn and has a high tensile strength.
• Contains pressure‑sensitive thermosetting adhesive which performs as Class B temperature (266 ºF / 130 ºC).
• Provides hear stable insulation for hot spot applications.
Test & Approvals: UL Recognized Component Listing for 150 ºC (Guide OANZ2, File E17385; CSA Accepted Component 130 ºC, File LR93411)

SKU	Length	Width	Thickness	Color
500-150749	66 ft	3/4 in	7 mil	White

Scotch® Glass Cloth Electrical Tapes 69

Features:
• Designed for use in 600‑volt dry location applications requiring both high mechanical strength and resistance to high temperatures.
• Thermosetting silicone pressure sensitive adhesive provides an increased bond, once applied in areas of high ambient temperatures.
• Class “H” temperature rating.
Test & Approvals: Meets Requirements of: Military Specification No. MIL‑I‑19166C; UL Recognized Component listing for 200 ºC (Guide OANZ2, File E17385); CSA Accepted Component 180 ºC File LR93411

SKU	Length	Width	Thickness	Color
500-099109	66 ft	0.75 in	7 mil	White

Scotch® Linerless Splicing Tapes 130C

Features:
• High‑voltage insulating tape that provides excellent thermal dissipation of splice heat.
• Provides immediate moisture seal and void‑free buildups.
• Rated up to 194 °F (90 °C) continuous operating temperatures and short‑term 266 °F (130 °C) overload service.

SKU	Length	Width	Thickness	Material
500-417187	30 ft	1 1/2 in	30 mil	Ethylene Propylene Rubber
500-417538	30 ft	1 in	30 mil	Ethylene Propylene Rubber
500-417545	30 ft	2 in	30 mil	Ethylene Propylene Rubber
500-417170	30 ft	3/4 in	30 mil	Ethylene Propylene Rubber

Scotch® Rubber Splicing Tapes 23

Features:
• Compatible with all solid dielectric cable insulation.
• A special polyester liner which will not stick to the tape upon unwind.
• Can be used to splice and terminate cables whose emergency overload temperatures can reach 130 °C (266 °F).
Material: Ethylene Propylene Rubber

SKU	Length	Width	Thickness
500-150251	20 ft	3/4 in	30 mil

Scotch® Super Vinyl Electrical Tapes 33+

Features:
• The combination of elastic backing and aggressive adhesive provides moisture‑tight electrical and mechanical protection with minimum bulk.
• Compatible with solid dielectric cable insulation.
• Compatible with rubber and synthetic splicing compounds, as well as epoxy and polyurethane resins.

SKU	Length	Width	Material
500-061304	20 ft	3/4 in	Polyvinyl chloride (PVC) backing
500-101741	44 ft	1-1/2 in	Vinyl
500-100751	44 ft	3/4 in	Polyvinyl Chloride (PVC) Backing
500-061335	52 ft	3/4 in	Polyvinyl Chloride (PVC) Backing
500-061328	66 ft	3/4 in	Polyvinyl Chloride (PVC) Backing

Scotch® Super Vinyl Electrical Tapes 88

Features:
• Compatible with solid dielectric cable insulations.
• Compatible with rubber and synthetic splicing compounds, as well as epoxy and polyurethane resins.
• Inhibits corrosion of electrical conductors.
Material: Polyvinyl Chloride (PVC) Backing

SKU	Length	Width	Thickness	Color
500-103561	36 yd	2 in	8.5 mil	Black
500-103646	44 ft	1 1/2 in	8.5 mil	Black
500-061434	66 ft	3/4 in	8.5 mil	Black

Scotch® Varnished Cambric Tapes 2520

Features:
• Electrical properties are stable up to (105 ºC / 220 ºF).
• Cotton bias cloth, woven at 60º, allows tape elongation.
• Varnish cambric tapes are rated for Class A.
• Non‑corrosive adhesive holds film in position until the jacket is applied.
Material: Fabric

SKU	Length	Width	Thickness	Color
500-048367	60 ft	3/4 in	8 mil	Yellow

Scotch® Vinyl Electrical Color Coding Tapes 35

Features:
• Has excellent electrical insulating properties, wraps smoothly, conforms well and holds over a wide range of temperatures.
• Pressure‑sensitive rubber based adhesive.

SKU	Length	Width	Color	Thickness
500-108368	66 ft	3/4 in	Blue	7 mil
500-000723	66 ft	3/4 in	Gray	7 mil
500-108511	66 ft	3/4 in	Green	7 mil
500-108696	66 ft	3/4 in	Orange	7 mil
Polyvinyl Chloride (PVC) Backing
500-108856	66 ft	3/4 in	Brown	7 mil
500-108108	66 ft	3/4 in	Red	7 mil
500-108283	66 ft	3/4 in	White	7 mil
Vinyl
500-112716	66 ft	3/4 in	Violet	7 mil

Temflex™ Vinyl Electrical Tapes 1700

Features:
• Primary electrical insulation for all wire and cable splices rated up to 600 volts.
• Polyvinyl chloride (PVC) tape that is flame‑retardant and conformable.
• Provides excellent mechanical protection with minimum bulk.
Test & Approvals: UL Listed; UL 510 Standard “Insulating Tape” (product category OANZ), File E129200; CSA Certification; Standard C22.2 No. 197‑M1983 “PVC Insulating Tape,” File LR 48769

SKU	Length	Width	Thickness	Color
500-697640	60 ft	3/4 in	7 mil	Black

General Purpose Vinyl Electrical Tapes

Features:
• Excellent adhesion and elongation properties.
• General purpose electrical tape for household and industrial applications.
Test & Approvals: UL Listed
Color: Black
Material: PVC; Vinyl
Thickness: 7 mil

SKU	Length	Width
761-602	60 ft	3/4 in

Electrical Tapes

Features:
• General purpose electrical tape for a variety of household and industrial applications.
• Stretchy and conformable for wrapping wires.
• Provides a strong long‑term bond with no flagging or lifting.
Test & Approvals: UL 510
Color: Black
Material: PTFE Fluorocarbon Resin
Thickness: 7 mil

SKU	Length	Width
573-1088276	60 ft	3/4 in

Electrical Tapes

Features:
• Quality PVC electrical tape.
• Non‑corrosive rubber adhesive.
• High‑tensile strength and elongation.
Color: Black
Material: PVC
Thickness: 7 mil

SKU	Length	Width
689-EV-57	66 ft	3/4 in

Marking Tapes

General Purpose Vinyl Tape 764

Features:
• Sturdy, vivid tape is ideal for marking surfaces and objects.
• High quality tape maintains its color over time.
• Adheres and conforms to irregular and uneven surfaces.
• Rubber adhesive provides a strong, instant bond.
Width: 2 in
Adhesion to Steel: 18 oz/in

SKU	Material	Length	Thickness	Color
405-021200-43185	PVC	36 yd	4 mil	White

Masking Tapes

Diamond Grade Conspicuity Marking Rolls

Features:
• Roll of alternating 6‑inch red and 6‑inch white, highly reflective, microprismatic sheeting with pressure‑sensitive adhesive for easy application to trucks, trailers and large vehicles to enhance visibility and detection distance.
• Adhesive is protected by an easy‑release liner.
Test & Approvals: DOT‑C2; FMVSS 108
Thickness: 0.014 to 0.018 in

SKU	Width	Color	Material	Roll Length
405-051138-67535	2 in	Red/White	Synthetic Resin	150 ft

Masking Tapes 2307

Features:
• General purpose tape features a broad tack that adheres to a variety of surfaces.
• Perfect for woodworking and cabinet making applications.
Test & Approvals: ASTM D 6123 and D 6123M‑97
Roll Length: 55 m
Thickness: 5.2 mil

SKU	Width	Color	Material
405-021200-71118	24 mm	Natural	Crepe Paper; Paper

234 Series General Purpose Masking Tapes

Features:
• Sturdy general purpose masking tapes are designed to be used in medium temperature paint bake operations.
• Natural rubber adhesive provides instant adhesion.
• Medium thickness crepe paper backing is designed for strength in demanding paint masking applications.
• Easy‑tear, pressure‑sensitive tape.

SKU	Color	Material	Width	Roll Length	Thickness
405-021200-02982	Natural	Crepe Paper	24 mm	55 yd	6 mil
405-021200-04244	Tan	Crepe Paper	1.88 in	60.14 yd	5.9 mil

High Performance Masking Tapes 401+

Features:
• Designed to deliver super‑sharp paint lines and resist paint bleed‑through.
• Provides superior adhesion to metal, glass, rubber and plastic.
• Comes off cleanly with no sticky residue left behind.
• Ideal for industrial jobs such as two‑tone color applications on buses, trucks, ambulances and airplanes.
• Can withstand surface temperatures up to 250 °F for 30 minutes.
Roll Length: 55 m

SKU	Color	Material	Width	Thickness
405-051115-64761	Green	Paper	0.94 in	6.7 mil
405-051115-64762	Green	Paper	1.41 in	6.7 mil
405-051115-64763	Green	Paper	48 mm	6.7 mil

Performance Yellow Masking Tape

Features:
• 3M proprietary solvent‑free adhesive sticks with confidence to most surfaces including metal, rubber, glass, and plastic while removing cleanly in one piece.
• Strong yellow crepe‑paper backing conforms to irregular surfaces, resists bleed through of most industrial paint systems, and improves visibility during the paint masking process.
• Medium‑high conformability.
Roll Length: 55 m

SKU	Color	Material	Width	Thickness
405-051115-64753	Yellow	Paper	48 mil	6.3 mil

Scotch-Blue™ Multi-Surface Painter’s Tapes

Features:
• This tape removes cleanly without adhesive transfer or surface damage for up to 14 days, even in direct sunlight.
• It is a medium adhesion tape that is ideal for painted walls and trim, woodwork, glass and metal.
Roll Length: 60 yd

SKU	Color	Material	Width	Thickness
405-051115-03681	Blue	—	1 in	—
405-051115-09168	Blue	—	2 in	—
405-051115-03683	Blue	Crepe Paper	2 in	5.4 mil

Scotch® High Performance Masking Tapes 232

Features:
• A high performance paper masking tape to be used in the medium temperature paint bake operation.
• A smooth crepe paper tape that is treated with a heat and solvent resistant coating.
Thickness: 5.7 mil

SKU	Color	Width	Roll Length
405-021200-02854	Tan	1 in	60 yd
405-021200-04240	Tan	2 in	55 m

Scotch® Masking Tapes 2308

Features:
• A general purpose masking tape for holding, bundling, sealing, general paint masking and a vast number of other jobs where a pressure‑sensitive tape is needed.
• Ideally suited for automotive collision repair applications.
• Sticks easily; resists lifting and curling.
• Solvent and moisture resistant.

SKU	Width	Roll Length	Thickness	Material
405-051131-06548	48 mm	55 m	5.3 mil	Crepe Paper

Scotch® Paint Masking Tapes 231

Features:
• Sticks at a touch and stays put.
• Tough and smooth high performance crepe paper tape.
• Generally functions in back cycles up to 200 °F for up to one hour.

SKU	Width	Roll Length	Thickness	Color
405-021200-03777	0.94 in	180.5 ft	7.3 mil	Natural

Utility Grade Masking Tapes

Features:
• The high adhesion value of this natural/synthetic rubber blend combined with the conformability provides a high degree of versatility.
• This general purpose masking tape is extremely versatile and may be used for interior masking, light bundling, holding and other various industrial applications.

SKU	Color	Material	Width	Roll Length	Thickness
761-87202	Beige	Crepe Paper	1 in	60 yd	4.8 mil
761-PG505.121R	Beige	Crepe Paper	1 in	60 yd	5.8 mil
761-PG505.123	Beige	Crepe Paper	2 in; 0.917 in	60 yd	5.8 mil
761-87201	Beige	Crepe Paper	48 mm	54.8 m	4.8 mil

Professional Painters Blue Masking Tape

Features:
• 14 days UV‑resistant.
• Non‑solvent formula.
• 30‑day clean removal.
Test & Approvals: SGS Tested and Certified
Width: 2 in
Roll Length: 60 yd
Thickness: 4.5 mm

SKU	Color	Material
449-TPBDT0200	Blue	Crepe Paper

Utility Grade Masking Tapes

Features:
• Utility grade masking tapes.
• Utility grade with very high adhesion.
• Designed for use in general purpose packaging, bundling, holding, splicing, tabbing and banding applications.
• Water and oil resistant.
• Provide excellent quick stick, flexibility and ease of use.
Test & Approvals: ASTM D 6123/D 6123M‑97 (2012), Type I
Width: 2 in
Roll Length: 60 yd
Thickness: 5 mil

SKU	Color	Material
689-CP-83-2	Natural	Crepe Paper

Economy Grade Masking Tapes

Features:
• Cost efficient creped paper masking tape, good for bundling, holding, sealing, and surface protection.
• Adheres to a variety of surfaces.
Roll Length: 60 yd
Thickness: 5.2 mil

SKU	Color	Material	Width
744-53120-00078-01	Cream	Creped Paper	1 in
744-53120-00080-01	Cream	Creped Paper	2 in

General Purpose Masking Tapes

Features:
• A solvent rubber adhesive and conformable paper backing combine to form the industry standard general purpose masking tape.
• Provides excellent adhesion to a variety of surfaces in a wide range of application fields.
• Excellent for light‑duty bundling, packaging and closing, light‑duty masking, and non‑critical and painting applications.
Roll Length: 60 yd
Thickness: 5.5 mil

SKU	Color	Material	Width
744-50124-00003-00	Natural	Crepe Paper	1 in
744-50124-00001-00	Natural	Crepe Paper	2 in
744-50124-00000-00	Natural	Crepe Paper	3 in
744-50124-00004-00	Natural	Crepe Paper	3/4 in

Painter’s Grade Masking Tapes

Features:
• Provides an excellent blend of value and performance due to its excellent paper strength, cured rubber adhesive, and high shear.
• Performs under stress and temperatures where general‑purpose products fail.
• It is a production grade masking tape which has been formulated to assure clean removal from a variety of substrates.
• Has excellent wet grab and should be used when general‑purpose masking tapes do not perform adequately.
Width: 2 in
Roll Length: 60 yd
Thickness: 5.8 mil

SKU	Color	Material
744-04421-00002-00	Natural	Creped Paper

Packaging Tape Dispensers

Professional Series Tape Dispensers

Features:
• Easy loading pistol grip dispenser.
• Max. 2 in. wide rolls
Used With: HP100; HP200; HP232; HP300; HP400; HP500; AP101; AP201; AP301; AP401; PP802; PP803; PP810; PP815; VF719; FP96; FP97; FP202 Tapes

SKU	Frame Material	Handle Material
689-SD-934	Metal	Polycarbonate

Packaging Tapes

Scotch® Box Sealing Tapes 311

Features:
• Acrylic adhesive offers instant seal.
• Seals well in cold, damp conditions 40‑50 °F) and on recycled fiberboard.
• Polypropylene backing adds tear resistance and excellent aging.
Color: Clear

SKU	Width	Length
405-076308-86493	48 mm	100 m

Scotch® High Performance Box Sealing Tapes 373

Features:
• For medium weight, large or high value content packaging.
• Strong tape provides tear and split resistance.
• Sticks well and handles under tough conditions.
Thickness: 2.5 mil
Color: Clear
Adhesion to Steel: 50 oz/in
Tensile Strength: 30 lb/in
Elongation: 160%
Material: Polypropylene Film/Hot Melt Synthetic Rubber Resin

SKU	Width	Length
405-021200-72368	48 mm	50 m

Scotch® High Performance Box Sealing Tapes 375

Features:
• Cartons remain closed under rough handling conditions.
• Premium heavy-duty, packaging tape for sealing center seams of double or triple wall corrugated cartons, shipping heavy or high value contents.
• Strong polypropylene backing for tear‑ and split‑ resistance.
Color: Clear

SKU	Width	Length	Thickness
405-021200-72406	48 mm	50 m	3.1 mil

Scotch® Industrial Box Sealing Tapes 371

Features:
• Offers a good, tight, general purpose seal.
• Polypropylene backing for tear resistance.
• Pressure‑sensitive rubber adhesive offers quick, moisture proof seal.
• Seals single wall corrugated cartons or bundles a group reliably.
Color: Clear

SKU	Width	Length	Thickness	Tensile Strength	Elongation
405-021200-15873	48 mm	100 m	—	—	—
405-021200-13679	48 mm	50 m	1.9 mil	22 lb/in	160%

Hot Melt General Purpose Carton Tapes

Features:
• A general purpose BOPP (biaxially‑oriented polypropylene) carton sealing tape for light to medium weight box sealing, package repair and bundling applications.
• Intertape’s Hot Melt adhesive offers superior adhesion properties, holding force and tensile strength.
• This hot melt carton sealing tape is available in hand and machine length rolls.
Thickness: 1.6 mil
Color: Clear
Wt.: 15.67 lb

SKU	Width	Length
761-F4020-05	1.156 in; 2 in	110 yd

Hot Melt Medium Grade Carton-Sealing Tapes

Features:
• 7100 Series machine and hand length rolls work well at room temperature and in cooler food packaging and processing applications.
• Noted for quiet release and easy unwind, is well suited for automatic case sealing machines.
• Production grade BOPP (biaxially‑oriented polypropylene) carton sealing tape manufactured with Intertape’s signature Hot Melt adhesive.
• Provides a consistent and effective closure to a variety of medium weight corrugated and linerboard boxes.
Thickness: 1.85 mil
Color: Clear
Adhesion to Steel: 32 oz/in
Tensile Strength: 27 lb/in
Elongation: 70%
Material: Polypropylene Backing; Hot Melt Synthetic Rubber Adhesive

SKU	Width	Length
761-F4085-05	48 mm	100 m

Carton Sealing Tapes

Features:
• Demonstrates excellent impact resistance and performs very well on most carton surfaces.
• Suitable for hand dispensers and automatic sealing equipment.
• Features a film backing with a synthetic rubber adhesive.
Color: Clear
Adhesion to Steel: 30 oz/in
Elongation: 90%
Material: Polypropylene

SKU	Width	Length	Thickness	Tensile Strength	Wt.
744-04264-00002-00	2 in	110 yd	1.6 mil	22 lb/in	0.46 lb
744-04263-00055-00	2 in	55 yd	1.9 mil	25 lb/in	0.28 lb

Pipe Sealant Tapes

Scotchrap™ All-Weather Corrosion Protection Tapes 50 & 51

Features:
• Scotchrap™ 50 and 51 tapes are tough, polyvinyl chloride based tapes with special high tack adhesive.
• Formulated to resist corrosion of metal piping systems above and below ground, fittings and joints on all mill‑coated pipe and electrical conduit systems.

SKU	Length	Width	Thickness	Color	Type
500-106388	100 ft	2 in	10 mil	Black	50
500-106463	100 ft	4 in	10 mil	Black	50

Gas Line Thread Sealant Tapes

Features:
• Heavy‑duty, full‑density tape that permits quick, clean and economical sealing of threaded pipe connections.
• Its full density makes it ideal for gas lines and other applications requiring the best possible seal.
• Tape is made of 99.5% virgin PTFE with a pigment additive for coloring.
• Its yellow color helps distinguish it from lower density, general purpose thread sealant tapes.
Test & Approvals: Mil Spec T27730A, FDA 21 CFR 1550
Thickness: 0.0035 in
Color: Yellow

SKU	Length	Width
102-1/2X260PTFE-YEL	260 in	1/2 in

White Thread Sealant Tapes

Features:
• Ideal solution for sealing threaded metal and plastic pipe connections up to 2” diameter.
• These thread sealant tape provides a tight seal and natural lubrication to prevent galling of the threads.
• Made of 100% virgin PTFE, it is resistant to most common chemicals.
Test & Approvals: Mil Spec T27730A, FDA 21 CFR 1550

SKU	Length	Width	Thickness
102-1/4X520PTFE	520 in	1/4 in	0.0035 in
102-1/2X1296PTFE	108 ft	1/2 in	0.0035 in
102-1/2X260PTFE	260 in	1/2 in	0.0035 in
102-1/2X520PTFE	520 in	1/2 in	0.0035 in
102-3/4X1296PTFE	1,296 in	3/4 in	0.0035 in
102-3/4X260PTFE	260 in	3/4 in	0.0035 in
102-3/4X520PTFE	520 in	3/4 in	0.0035 in
102-1X1296PTFE	1,296 in	1 in	0.0035 in
102-1X260PTFE	260 in	1 in	0.0035 in
102-1X520PTFE	520 in	1 in	0.0035 in

PTFE Pipe Thread Tapes

Features:
• Provides a highly resistant seal on pipe threads for all types of service.
• Suitable for use with solvents, chemicals, oxygen, and on food lines.
• Permits easy disassembly, even after years of service.
Test & Approvals: Meets Mil. Spec T‑22730A

SKU	Length	Width	Thickness	Color
434-44071	260 in	1/2 in	3 mil	White
434-44072	520 in	1/2 in	3 mil	White
434-44075	520 in	3/4 in	3 mil	White
434-44078	520 in	1 in	3 mil	White

Slic-Tite® PTFE Thread Tapes

Features:
• Non‑toxic.
• Permits easy disassembly, even after many years of service.
• Premium grade, high density tape.
• Provides a highly resistant seal on pipe threads for all types of service.
• Suitable for use with solvents, chemicals, oxygen, and on food lines.
Test & Approvals: Meets Mil. Spec T‑22730A

SKU	Length	Width	Thickness	Color
434-44083	600 in	1/2 in	3 mil	White

Specialty Tapes

Temflex™ Friction Tape

Features:
• This high grade friction tape has good abrasion resistance up to 176 °F/80 °C.
• Provides mechanical protection against abrasions for cable and wire splices, and overwrap for mechanical protection of wires and cable.
• High‑break strength and low stretch make it ideal for use as a heavy‑duty binding and harnessing of wires and cable.
Base Material: Cotton Cloth
Type: Friction

SKU	Width	Length	Thickness	Color
500-571736	3/4 in	60 ft	13 mil	Black

Double Coated Urethane Foam Tapes 4016

Features:
• High shear strength on metal and high surface energy plastics.
• Durable foam is ideal for interior mounting applications.
• Ideal for bonding, attaching, and mounting.
• The foam dampens and prevents vibration and open‑cell structure aids component cooling.
Thickness: 1/16 in
Base Material: Urethane Foam
Type: General Industrial Purpose

SKU	Width	Length
405-021200-06455	1 in	36 yd

322 Multi-Purpose Plain Foil Tape

Features:
• Excellent adhesion and durability.
• Features thick, conformable foil with Kraft paper liner.
• Versatile applications for indoor or outdoor use.
• Effective for insulation and taping joints or seams against moisture.
Test & Approvals: ASTM D‑1000
Thickness: 5 mil
Color: Aluminum Silver
Base Material: Foil
Type: Multi‑Purpose Foil Tape

SKU	Width	Length
573-1087627	2 in	50 yd
573-1087629	72 mm	46 m

Flame Retardant Cloth Tapes

Features:
• Flame retardant polyethylene coated waterproof tape.
• Exhibits outstanding handling characteristics and conforms well to duct systems.
Test & Approvals: Conforms to FAA Specification FAR 25.853(a),
McDonnell‑Douglas Spec DMS 1986 D Lockhead Spec LCP‑86‑1226‑A, and Boeing Spec D 6‑8099
Thickness: 12 mil
Color: White
Base Material: Polyethylene Coated Cloth
Type: Flame Retardant
Wt.: 1.7 lb

SKU	Width	Length
573-1086476	2 in	60 yd

Strapping Tapes

RG300 Utility Grade Filament Tapes

Features:
• An economical fiberglass reinforced polypropylene film combined with an aggressive ‘solventless’ pressure‑sensitive adhesive.
• Designed for the majority of packaging, palletizing and unitizing applications.
• Excellent adhesion to corrugated cartons.
• Outstanding holding power.
Color: Clear
Tensile Strength: 100 lb/in

SKU	W x L	Thickness
761-RG300.41	1 in x 60 yd	4 mil

Strapping Tapes

Features:
• Fiberglass reinforced tape designed for the majority of packaging, palletizing and unitizing applications.
• Provides excellent adhesion to corrugated cartons and exhibits outstanding holding power.
Color: Clear
Adhesion to Steel: 63 oz/in
Tensile Strength: 100 lb/in

SKU	W x L	Thickness
761-RG300.43	2 in x 60 yd	4 mil

Economy Grade Filament Strapping Tapes

Features:
• Low tensile, economical fiberglass reinforced filament tape, with an aggressive high shear resistant adhesive system.
• Used for non‑critical bundling applications.
Color: Clear
Adhesion to Steel: 60 oz/in
Tensile Strength: 100 lb/in

SKU	Width	Length	Thickness
744-53327-09001-00	3/4 in	60 yd	3.8 mil

Performance Grade Filament Strapping Tapes

Features:
• A performance strength fiberglass reinforced filament tape with an aggressive high tack synthetic rubber resin adhesive.
• The fiberglass reinforced backing provides high tear resistance and low elongation.
Color: Clear
Adhesion to Steel: 70 oz/in
Tensile Strength: 155 lb/in

SKU	Width	Length	Thickness
744-53319-00006-00	1 in	60 yd	4.4 mil
744-53319-00002-00	2 in	60 yd	4.4 mil
744-53319-00001-00	3/4 in	60 yd	4.4 mil

CAR WAXES, POLISHES & PROTECTANTS

Car Wash Concentrate

Features:
• Powerful cleaners lift away dirt and road grime.
• Clean‑rinsing formula for spot‑free, streak‑free results.
• Safe for all automotive finishes, including clear coats.

SKU	Packing Type	Capacity Vol.	Quantity
158-25464	Bottle	64 oz	4 per case

Original Protectants

Features:
• Protects vinyl, rubber and plastic from fading and cracking caused by UV, ozone, oxidation and extreme temperatures.
• Water‑based formula.
Quantity: 6/CA

SKU	Packing Type	Capacity Vol.
158-10228	Spray Bottle	28 oz per

Truck & Trailer Washes

Features:
• Cleans in one application.
• No brushing required.
• Removes exhaust deposits, road film, and bug residues.

SKU	Packing Type	Capacity Vol.
019-1041566	Pail	5 gal

CLEANING PRODUCTS

Cleaners & Degreasers

Citrus Base Adhesive Remover

Features:
• Removes a variety of adhesives and other substances.
• Cleans oil, grease, tar, and grime quickly and easily to keep processes moving forward.

SKU	Capacity Vol.	Removes	Odor/Scent
405-021200-49048	18.5 oz	Grease; Oil; Ink	Citrus

High Power Brake Cleaners

Features:
• Now removes oil up to 2X faster – use up to 50% less brake cleaner.
• High‑pressure, flushing action cleans braking systems with ease.

SKU	Capacity Vol.	Removes
405-051135-08880	14 oz	Oils

Aervoe Brake Cleaners

Features:
• Effective on removing oils, greases, wax, dirt and moisture from disc/drum brake linings and pads.
• Can also be used as a general cleaner/degreaser in other shop areas.

SKU	Capacity Vol.	Odor/Scent
205-592	14 oz	Mild

Protex® Alclean Aluminum Cleaners

Features:
• Quickly cleans oxides, dirt and grime.
• Not recommended for 2000 series aluminum; may turn surface black.

SKU	Capacity Vol.	Removes	Color
Chemical Compound: Phosphoric Acid; Ammonium Bifluoride
358-5702-1200	1 qt	Oxidation; Dirt	Blue

B-12 CHEMTOOL® Carburetor/Choke Cleaners

Features:
• Cleans petroleum residue from fuel systems, fuel injectors, valves, rings and pistons.
• Great for use on oil returns, lifters, PCV valves, and oil pump screens.

SKU	Capacity Vol.	Applicable Material	Removes	Odor/Scent
Chemical Compound:Acetone; Methanol; Toulene
084-0116	15 oz	Fuel Injectors; Fuel Lines; Fuel System; Pistons; Rings; Valves	Fuel Residues; Gum; Moisture; Varnish	Aromatic (Toulene)
084-0117C	16 oz	N/A	Deposits; Fuel Residue; Gum	Acetone
084-0117	16 oz	Carburetor; Choke; Air-Intake/Throttle Body Cleaning	Deposits; Fuel Residue; Gum; Varnish	Mild, Aromatic

Brake Cleaners

Features:
• Removes brake fluid, grease, oil and other contaminants.
• Cleans most related brake parts.
Removes: Brake Fluid; Grease; Oil; Other Contaminants
Chemical Compound: Methylene Chloride; Perchloroethylene; Toluene

SKU	Capacity Vol.	Odor/Scent
084-1420	19 oz	Mild, Solvent

Chem-Dip® Professional Parts Cleaner

Features:
• Non‑corrosive to metal and requires no agitation.
• A chemical seal retards evaporation and aids in emulsification.
• Removes carbon, varnish, paint, sludge, and grease fast.
Applicable Material: Alloys; Metal Parts
Removes: Enamel; Grease; Gum; Hard Carbon; Paint; Sludge; Varnish
Chemical Compound: Cresol (Mixed Isomers); Methylene Chloride; Toulene

SKU	Capacity Vol.	Odor/Scent
084-0905	5 gal	Antiseptic

Non-Chlorinated Brake Cleaners

Features:
• Formulated to clean without chlorinated solvents.
• Tackles toughest oil, brake fluid, grease and grime deposits.
Removes: Brake Fluid; Grease; Oil; Other Contaminants
Chemical Compound: Acetone; Isohexane; Toluene

SKU	Capacity Vol.	Odor/Scent
084-2421	19 oz	Mild, Aromatic

Air Tool Conditioner

Features:
• Restores and prolongs air tool life.
• Removes built‑up calcium, varnish, sludge and water.
Applicable Material: Pneumatic Systems; Impact Wrenches; Drills; Grinders/Polishers/Sanders
Removes: Calcium; Sludge; Moisture

SKU	Capacity Vol.	Chemical Compound	Odor/Scent
108-16-ATC	16 oz	Petroleum Based	Moderate Aliphatic

Citrus Based Degreasers

Features:
• Fast acting.
• Spray on and wipe off tough grease.
• Dries Residue Free.
Applicable Material: Household Cleaning, Garage/Home
Removes: Tar; Grease; Oil; Resin & Ink

SKU	Capacity Vol.	Chemical Compound	Odor/Scent
108-16-CBD	11 oz	Light Petroleum Distillates	Citrus

Non-Chlorinated Brake Cleaners

Features:
• Quickly dissolves and flushes away contaminants.
• Fast formula leaves no residue and improves brake performance.
Removes: Brake Fluid; Contaminants; Grease; Oil
Chemical Compound: Acetone; Carbon Dioxide; Heptane

SKU	Capacity Vol.	Chemical Compound	Odor/Scent
108-20-BC	14 oz	Acetone; Carbon Dioxide; Heptane	Acetone‑Like

50 State Formula Brakleen® Brake Parts Cleaners

Features:
• Degreases instantly and leaves no residue.
• Removes brake fluid, grease and oil.
Applicable Material: Brake Parts/Linings/Pads
Chemical Compound: Acetone; 3‑Methylhexane; Methylcyclohexane; n‑Heptane; Cyclohexane

SKU	Capacity Vol.	Removes
125-05050	20 oz	Brake Fluid; Grease; Oil

Battery Cleaners

Features:
• Assures Maximum Battery Current Flow.
• Promotes longer battery life.
• Use CRC Battery Terminal Protector (#03175) for extended protection.

SKU	Capacity Vol.	Removes	Chemical Compound
125-03176	12 oz	Corrosion	Alkali Solution

Brakleen® Brake Parts Cleaners

Features:
• Cleans and dries fast leaving no residue.
• Degreases instantly.

SKU	Capacity Vol.	Removes	Chemical Compound
Applicable Material: Brake Parts/Linings/Pads
125-05089	20 oz	Grease; Brake Fluid; Oil	Tetrachloroethylene

Brakleen® Non-Chlorinated Brake Parts Cleaners

Features:
• Works without disassembly.
• Contains no chlorinated solvents.
Removes: Grease; Brake Fluid; Oil

SKU	Capacity Vol.	Chemical Compound
Applicable Material: Brake Parts/Linings/Pads
125-05088	14 oz	Alcohol
125-05151	14 oz	Acetone; Heptane; Methanol; Toulene
125-05084	14 oz	Acetone; Heptane; Methanol; Toulene

Cable Clean® RD™ High Voltage Splice Cleaners

Features:
• Residue free, rapid evaporation.
• Removes wire pulling compounds, antioxidation compounds, and semi‑conductive particles.
Applicable Material: “Metal; Plastic”
Removes: Silicone; Anti‑Oxidation Compounds

SKU	Capacity Vol.	Chemical Compound
125-02150	16 oz	Tetrachloroethylene

Carb & Choke Cleaners

Features:
• Will not harm oxygen sensors or catalytic converters.
• Fast acting cleaning action.
• Effectively dissolves deposits such as gum, sludge and varnish.
Removes: Gum; Sludge; Varnish

SKU	Capacity Vol.	Chemical Compound
Applicable Material: Non-Painted Surfaces
125-03077	16 oz	Methanol; Acetone; Toluene

Chlor-Free™ Non-Chlorinated Degreasers

Features:
• Fast drying to help minimize downtime.
• Penetrates quickly to remove oil, grease and other contaminants.

SKU	Capacity Vol.	Removes	Chemical Compound
Applicable Material: Metals
125-03185	20 oz	Grease; Oil	Organic Solvents

Citrus Degreaser

Features:
• Biodegradable and dries fast.
• No Class I or Class II Ozone Depleting Chemicals.

SKU	Capacity Vol.	Removes	Chemical Compound
Applicable Material: Metals
125-14170	20 oz	Adhesive; Grease; Oil; Rust; Sludge; Tar	Petroleum; d‑Limonene

Clean-R-Carb™ Carburetor Cleaners

Features:
• Maximizes carburetor performance.
• Harmless to catalytic converters and oxygen sensors.

SKU	Capacity Vol.	Applicable Material	Chemical Compound
Removes: Carbon Deposits, Grime; Dirt
125-05381	16 oz	Carburetor; Carburetor Components; Intake Parts; Automatic Choke; Exhaust Gas Recycling Valve (EGR)	Acetone
125-05081	16 oz	N/A	N/A

Contact Cleaner 2000® Precision Cleaners

Features:
• Removes dirt, light oils and other contaminants.
• Evaporates quickly, leaves no residue, has no flash or fire point.
Removes: Dust; Fingerprints; Oil; Flux; Soil

SKU	Capacity Vol.	Chemical Compound
Electrical/Electronic Equipment; Metal Switches; Not recommended for use on Lexan®, Noryl® or polycarbonate type plastic
125-03150	13 oz	HCFC
125-02140	13 oz	HCFC

CO® Contact Cleaners

Features:
• Evaporates quickly and leaves no residue.
• Non‑flammable, non‑chlorinated, non‑staining and non‑corrosive.
• High dielectric strength of 27,600 volts.
• Contains no VOCs.
• Contains no Class I or Class II ozone depleting chemicals.
• NSF Registered (K2) for use in meat and poultry plants.
Applicable Material: Electronic Components; Plastics
Removes: Dust; Fingerprints; Oil; Dirt

SKU	Capacity Vol.	Chemical Compound
125-02016	16 oz	HFC Base; Tetrafluoroethane

Duster™ Aerosol Dust Removal Systems

Features:
• Removes dirt and dust from any surface without damaging sensitive components or surface finish.
• Non‑flammable, no residue and non‑abrasive.
• Safe on all plastics.
Applicable Material: Plastic
Removes: Dust; Flux

SKU	Capacity Vol.	Chemical Compound
125-14085	12 oz	HFC

Duster™ Moisture-Free Dust & Lint Remover

Features:
• Safely eliminates debris from sensitive electronics, appliances and equipment.
• No wetting or clumping.
• Plastic safe.
• Non‑abrasive, non‑corrosive.
• Non‑ozone depleting.
Applicable Material: Electronic Components; Plastics
Removes: Dirt; Dust; Lint

SKU	Capacity Vol.	Chemical Compound
125-05185	16 oz	HFC

Electrical Parts Cleaners

Features:
• Non‑flammable.
• Fast evaporation, leaves no residue.
• Non‑staining, non‑corrosive and non‑conductive.
• High Dielectric Strength of 37,500 Volts.
• Contains no 1,1,1‑Trichloroethane.
Dielectric Strength: 37,500 V/mil
Applicable Material: Energized Electrical Equipment
Removes: Corrosion; Grease; Oil; Sludge

SKU	Capacity Vol.	Chemical Compound
125-02180	20 oz	Tetrachloroethylene

Gasket Removers

Features:
• Contains no methylene chloride.
• Loosens Carbon Deposits.
• Protects equipment surfaces by reducing the need for excessive scraping.
• Excellent paint, varnish, and graffiti remover.
Applicable Material: Metals; Stone
Removes: Adhesive; Paint; Sealant; Varnish

SKU	Capacity Vol.	Chemical Compound
125-03017	16 oz	Organic Solvents Base

Heavy Duty Degreaser II

Features:
• High flash point.
• Leaves no residue.
• Non‑conductive and non‑corrosive.
• High dielectric strength.
• Low odor compound, unlike citrus‑based products.
• Contains no Class I or Class II ozone depleting chemicals.
Applicable Material: Metals; Plastic; Nylon
Removes: Grease; Dust; Ink; Oil; Tar; Wax

SKU	Capacity Vol.	Chemical Compound
125-03120	20 oz	Petroleum

Heavy Duty Degreasers

Features:
• No flash or fire Point.
• Non‑Corrosive and Non‑Staining.
• High dielectric strength of 39,200 volts.
• High cleaning strength of 105 KB.
• Contains no Class I or Class II ozone depleting chemicals.
Applicable Material: Multi‑Purpose
Removes: Corrosion; Grease; Oil; Sludge

SKU	Capacity Vol.	Chemical Compound
125-03095	20 oz	Chlorinated Solvent

HydroForce® All Purpose Cleaner/Degreasers

Features:
• Biodegradable.
• No Class I or Class II Ozone Depleting Chemicals.
• Non‑corrosive, non‑abrasive, and non‑flammable.
• Unique spreadability.
Applicable Material: Chrome; Fabric; Fiberglass; Metals; Plastics; Stainless Steel; Vinyl
Removes: Grease; Oil; Sludge; Wax

SKU	Capacity Vol.	Chemical Compound
125-14406	20 oz	Water‑Base

HydroForce® Foaming Citrus All Purpose Cleaners

Features:
• Biodegradable.
• Butyl free.
• No Class I or Class II Ozone Depleting Chemicals.
• No running or dripping.
• Silicone Free.
Applicable Material: Fabric; Fiberglass; Metals; Plastics; Rubber; Stainless Steel; Vinyl
Removes: Dust; Grease; Ink

SKU	Capacity Vol.	Chemical Compound
125-14400	20 oz	Water‑Base

HydroForce® Industrial Strength Cleaner/Degreasers

Features:
• Biodegradable.
• No Class I or Class II Ozone Depleting Chemicals.
• Low foaming.
• Non‑abrasive and non‑flammable.
Applicable Material: Chrome; Concrete; Fabric; Metals; Plastics; Stainless Steel; Vinyl
Removes: Grease; Oil; Sludge; Tar; Wax

SKU	Capacity Vol.	Chemical Compound
125-14415	32 oz	Water‑Base

Industrial Contact Cleaners

Features:
• Evaporates quickly and leaves no residue.
• Non‑flammable, non‑chlorinated, non‑staining and non‑corrosive.
• High dielectric strength.
• Contains no VOCs.
• Contains no Class I or Class II ozone depleting chemicals.
Applicable Material: Plastic
Removes: Fingerprints; Oil

SKU	Capacity Vol.	Chemical Compound
125-03070	16 oz	HFE Blend

Isopropyl Alcohol Cleaners

Features:
• A Quick Drying Light‑Duty Precision Cleaner For Use In Industrial, Electrical, Electronic And Aviation Applications.
• Its 99% Pure Formula Aggressively Dissolves Grease, Dust, Dirt, Lint, Oils and Flux from Most Non‑Plastic Surfaces.

SKU	Capacity Vol.	Chemical Compound
125-03201	16 oz	Isopropanol

Knock’er Loose® Penetrating Solvents

Features:
• Designed to quickly loosen and free seized, bound or frozen fasteners.
• Quickly permeates rust, scale, gum, grease and corrosion.
• Lubricating residue prevents corrosion.
Applicable Material: Most Metals
Removes: Rust; Scale; Lime; Gum; Grease; Corrosion

SKU	Capacity Vol.	Chemical Compound
125-03020	16 oz	Petroleum Base

Lectra Clean® Heavy Duty Degreasers

Features:
• No flash or fire Point.
• Non‑Corrosive and Non‑Staining.
• High dielectric strength of 36,700 volts.
• Contains no 1,1,1‑Trichoroethane.
• Contains no Class I or Class II ozone depleting chemicals.
Removes: Grease; Oil; Sludge
Applicable Material: Plastic

SKU	Capacity Vol.	Chemical Compound
125-02018	19 oz	Chlorinated Solvent

Lectra Motive® Electric Parts Cleaners

Features:
• Non‑flammable.
• Leaves no residue.
• Dissolves grease, oil, dirt and wax.
• Provides fast thorough cleaning for non‑sensitive electrical equipment.
Applicable Material: Energized Electrical Equipment
Removes: Grease; Oil; Wax

SKU	Capacity Vol.	Chemical Compound
125-05018	20 oz	Chlorinated

Natural Degreaser™ Cleaners/Degreasers

Features:
• Unique advanced technology blend of natural citrus and organic solvents.
• Non‑corrosive and effective for use on all metals.
• High dielectric strength.
• Suitable for use on some plastics.
Applicable Material: Metals
Removes: Corrosion; Grease; Adhesive; Oil; Sludge

SKU	Capacity Vol.	Chemical Compound
125-14005	20 oz	Gycol Ether

QD™ Contact Cleaners

Features:
• Quick drying, leaves no residue, safe on all plastics.
• Effectively removes soil and other contaminants from electrical and electronic components.
• Ideal for applications where lower flash point solvents can be used.
• Industrial grade.
Removes: Dust; Fingerprints; Oil
Applicable Material: Plastic

SKU	Capacity Vol.	Chemical Compound
125-02130	11 oz	Petroleum Disrillate; Alcohol
125-03130	11 oz	Petroleum Disrillate; Alcohol

Quick Clean™ Safety Solvents and Degreasers

Features:
• Non‑flammable.
• Fast evaporation, leaves no residue.
• Non‑staining, non‑corrosive and non‑conductive.
• High dielectric strength.
Applicable Material: Metals
Removes: Grease; Oil; Sludge

SKU	Capacity Vol.	Chemical Compound
125-03180	20 oz	Chlorinated Solvent

Super Citrus Heavy-Duty Degreasers

Features:
• Designed for extremely challenging cleaning jobs in industrial and manufacturing environments.
• Effective for dissolving grease, oil, ink and grime.
Applicable Material: Fabric; Fiberglass; Metals; Plastics; Rubber; Stainless Steel; Vinyl
Removes: Oil; Dust; Grease; Ink

SKU	Capacity Vol.	Chemical Compound
125-14440	20 oz	Difluoroethane; d‑Limonene

Crown Heavy Duty Cleaner/Degreaser

Features:
• Safe on most plastics and has a light citrus scent.
• Does not leave a residue.
• Wipes off without rinsing.
• Does not contain chlorinated solvents.

SKU	Capacity Vol.	Removes
205-8260	20 oz	Grease

Off-Line Contact Cleaners

Features:
• Fast‑evaporating, low‑odor cleaner for off‑line equipment maintenance.
• Safe on most plastics and metals.
• Does not contain chlorinated solvents.
Applicable Material: Most Plastics and Metals
Chemical Compound: Hexane; Isopropanol

SKU	Capacity Vol.	Removes	Odor/Scent
205-8276	10.9 oz	Contaminants	Mild Hydrocarbon

Toolmaker’s Ink Removers

Features:
• Use to remove #6001 Toolmaker’s Ink Blue.
• Designed for use in manufacturing facilities.
• Easily removes ink from machinery and electrical equipment.

SKU	Capacity Vol.	Removes	Applicable Material	Odor/Scent
205-6095	16 oz	Ink	Metals; Aluminum; Glass	Aromatic

Cleaner Blend 300

Features:
• Safe, multi-purpose, non‑trichloroethane‑based degreaser for removing heavy grease and oil deposits from metal surfaces.
• Excellent general‑purpose degreaser.
• Ideal for removing soaked‑in oils.
Applicable Material: Metals; Plastic; Concrete; Rubber; Wood

SKU	Capacity Vol.	Removes
230-19510	1 pt	Grease; Dirt; Oil; Tar

Remover & Cleaners

Features:
• No hazardous chemicals such as 1,1,1‑trichloroethane, or chlorinated solvents.
• Applicable for plastic.
• metals and glass.
• Removes grease, ink, oil and paint.

SKU	Capacity Vol.	Removes	Chemical Compound
Applicable Material: Plastic; Glass; Metals
253-82738	1 gal	Grease; Ink; Oil; Paint	Acetone; Ethanol
253-82638	1 qt	Grease; Ink; Oil; Paint	Acetone; Ethanol
253-82038	16 oz	Grease; Ink; Oil; Paint	Acetone; Ethanol
253-82838	5 gal	Grease; Ink; Oil; Paint	Acetone; Ethanol

Clean-Up™ Industrial Safety Solvent/Cleaners

Features:
• Residue‑free that and meets the requirements for a high rating of 29,000KV for electrical and energized equipment.
• Degreaser that penetrates heavy oil and grease products to breakdown and dissolve the petroleum base ingredients to clean the surface prior to painting or preparing for assembly.
Chemical Compound: Halocarbon

SKU	Capacity Vol.	Applicable Material	Removes
399-61542	18 oz	Metals; Plastic	Dust; Grease; Oil; Paint

Acetone Thinners and Reducers

Features:
• Fast evaporating for spray application.
• Quick drying.

SKU	Capacity Vol.	Chemical Compound
425-K01663000-16	1 gal	Acetone

CFC Free Electro Contact Cleaners

Features:
• Safe on plastics.
• Fast evaporating, leaves no residue.
• Cleans and degreases delicate precision mechanisms.
Applicable Material: Metals; Plastic; Fabric; Glass; Rubber; Paint

SKU	Capacity Vol.	Removes	Chemical Compound
428-03116	11 oz	Grease; Dirt; Flux; Oil	Isopropyl Alcohol

CFC Free NU LVC Contact Cleaners

Features:
• Ideal for electrical/electronic and fine parts.
• Cleans and degreases delicate precision mechanisms.
• Does not contain chlorinated solvents.
Removes: Dirt; Flux; Moisture; Dust; Oxides; Contaminates

SKU	Capacity Vol.	Applicable Material	Chemical Compound
428-05416	11 oz	Metals; Plastic	Refrigerant Gas; Isopropyl Alcohol

EFX® Solvent Degreaser

Features:
• Instant degreasing action.
• Safe to use on most surfaces.
• Ideal for cleaning metals and most plastics.

SKU	Capacity Vol.	Removes
428-01820	15 oz	Grease; Oil

Electra-X Contact Cleaner

Features:
• Removes oil, grease, dirt and other foreign materials from precision mechanical and delicate electrical/electronic parts.
• For use on precision mechanical and delicate electrical/electronic parts.
Applicable Material: Safe on Most Surfaces.; May Be Harmful To Some Plastics

SKU	Capacity Vol.	Removes	Chemical Compound
428-00816	12 oz	Dirt; Oil; Grease	1‑bromopropane

HDX Heavy-Duty Degreasers

Features:
• Quick penetration, and no residue.
• Heavy‑duty action removes oil, grease, wax, dirt, moisture, tar, brake fluid and other contaminants.
Chemical Compound: 1,1,2‑trichloroethylene

SKU	Capacity Vol.	Removes	Applicable Material
428-01020	19 oz	Oil; Grease; Wax; Dirt; Tar; Brake Fluid; Other Contaminants	Safe on Most Surfaces.; May Be Harmful To Some Plastics

Instant Super Degreaser 2.0

Features:
• Removes dirt, oil, grease, tar and other residues.
• Non‑brominated formula increases worker safety.
• Fast evaporation time means less cleanup time.

SKU	Capacity Vol.	Chemical Compound	Applicable Material	Removes
428-07220	20 oz	Halogenated	All Metals	Oil; Dirt; Tar; Grease; Residues

Instant Super Degreasers

Features:
• Heavy‑duty performance.
• No rinsing and no residue.
• Safe on metals.
Removes: Grease; Oil; Wax; Dirt; Tar; Other Contaminants

SKU	Capacity Vol.	Chemical Compound	Applicable Material
428-00720	20 oz	1‑bromopropane; n‑propanol	All Metals

Micro-X Fast Evaporating Contact Cleaners

Features:
• Does not contain CFCs, HCFCs or 1,1,1 trichloroethane.
• Safe on metal and most plastics.
Removes: Dirt; Dust; Contaminates

SKU	Capacity Vol.	Chemical Compound	Applicable Material
428-04516	11 oz	Isopropyl Alcohol	Metals; Plastic

NoFlash® 2.0 Electro Contact Cleaners

Features:
• Select an industrial‑strength formula contact cleaner for maximum cleaning power.
• Non‑flammable and non‑conductive formula can be used on or near energized equipment.
• Inverta spray valve allows user to spray in an upright or inverted position.
• Efficiently cleans contact points on your electrical equipment.
Applicable Material: Contacts; Controls; Circuit Breakers; Generators; Instrumentation; Meters; Printed Circuit Boards; Relays & Controls

SKU	Capacity Vol.	Removes	Chemical Compound
428-07416	12 oz	Corrosion; Dirt	Halogenated

NoFlash® Electro Contact Cleaners

Features:
• Nonflammable.
• Nonconductive.
• Fast evaporating.
• No rinsing and no residue.
• Quick penetration.
• Superior wetting action.
• Nonconductive.
• Fast evaporating.
Applicable Material: Safe To Use On Most Surfaces;Test For Compatibility on ABS, Acrylics, Polystyrene and Polycarbonate
Removes: Dirt; Dust; Flux; Moisture; Oxides

SKU	Capacity Vol.	Chemical Compound
428-04016	12 oz	n‑Propyl Bromide; Ethane; 1‑Propanol; 1,2 Butylene Oxide; t‑Butanol

Precision Clean Multi-Purpose Cleaner/Degreasers

Features:
• Water‑based biodegradable formula.
• Removes tough, stubborn stains and soils such as grease, oil, sludge, soot, ink, coffee, and more.
• Does not contain chlorinated or petroleum solvents, bleach, ammonia, abrasives or butyl.
Applicable Material: All Surfaces Except Magnesium
Removes: Soil; Grease; Oil; Sludge; Soot

SKU	Capacity Vol.	Chemical Compound
428-02728	28 oz	Alkaline